Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

    eBore™ Universal

    Selecionar filtros
    Filtros
    Filtros
      Exibir filtros em
      Métrico
      Polegada
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (27)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
      • M Stainless Steel (27)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
      • K Cast Iron (23)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
      • N Non-Ferrous Materials (23)
        • N1
          Wrought Aluminum (23)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(23)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
        • N6
          Carbon, Graphite Composites, CFRP (23)
        • N7
          MMC's (23)
      • S High-Temp Alloys (27)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
      • H Hardened Materials (23)
        • H1
          Hardened Materials 44-48 HRC(23)
        • H2
          Hardened Materials 48-55 HRC(23)
        • H3
          Hardened Materials 56-60 HRC(23)
        • H4
          Hardened Materials >60 HRC(23)
      • C CFRP Materials (23)
        • C1
          CFRP, CFRP / CFRP (23)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (23)
      Applications
      Applications
      • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (17)
      • Blind Hole FinishingBlind Hole Finishing (17)
      • Through & Cross Hole FinishingThrough & Cross Hole Finishing (17)
      • Through Hole FinishingThrough Hole Finishing (17)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (23)
      • Lightly Interrupted Cut (27)
      • Smooth Cut (27)
      • Varying Depth of Cut (27)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 91.0 (4)
      • 92.0 (23)
      Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • E-BORE Boring Bar (21)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (17)
      • 2.0 (17)
      • 3.0 (4)
      • 4.0 (17)
      Cutting Edges Per Insert MinaCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 0.65 in(2)
      • 0.669 in(3)
      • 1.772 in(1)
      • 1.891 in(1)
      • 2.086 in(1)
      • 2.087 in(1)
      • 2.165 in(1)
      • 2.265 in(1)
      • 2.282 in(2)
      • 2.479 in(1)
      • 2.676 in(1)
      • 2.677 in(1)
      • 2.873 in(1)
      • 3.071 in(1)
      • 3.269 in(1)
      • 3.661 in(2)
      • 3.858 in(2)
      • 4.449 in(2)
      • 4.843 in(1)
      • 5.63 in(1)
      Over All Length [L] MinaOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 16.5 mm(2)
      • 17.0 mm(3)
      • 45.0 mm(1)
      • 48.0 mm(1)
      • 52.975 mm(1)
      • 53.0 mm(1)
      • 55.0 mm(1)
      • 57.5 mm(1)
      • 57.975 mm(2)
      • 62.975 mm(1)
      • 67.976 mm(1)
      • 68.0 mm(1)
      • 72.976 mm(1)
      • 78.0 mm(1)
      • 83.0 mm(1)
      • 93.0 mm(2)
      • 98.0 mm(2)
      • 113.0 mm(2)
      • 123.0 mm(1)
      • 143.0 mm(1)
      Over All Length [L] MinaOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.001 in(23)
      • 0.002 in(23)
      • 0.004 in(27)
      • 0.008 in(23)
      • 0.016 in(23)
      • 0.031 in(23)
      Corner Radius MinaCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.025 mm(23)
      • 0.05 mm(23)
      • 0.1 mm(27)
      • 0.2 mm(23)
      • 0.4 mm(23)
      • 0.8 mm(23)
      Corner Radius MinaCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(6)
      Corner Chamfer MinaCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(6)
      Corner Chamfer MinaCorner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • HCK10 (23)
      • HK1500 (23)
      • HK35 (23)
      • HT2 (23)
      • HTX (23)
      • HWK15 (23)
      • K10M (23)
      • K10P (23)
      • K10U (23)
      • K15U (23)
      • K20K (23)
      • K25M (23)
      • K313 (23)
      • K68 (23)
      • KB1610 (23)
      • KB1630 (23)
      • KB5610 (23)
      • KB5625 (23)
      • KB5630 (23)
      • KB9610 (23)
      • KBH10 (23)
      • KBH20 (23)
      • KC5010 (23)
      • KC5025 (23)
      • KC5410 (23)
      • KC720 (23)
      • KC730 (23)
      • KC732 (23)
      • KC8050 (23)
      • KC810 (23)
      • KC850 (23)
      • KC9010 (23)
      • KC9025 (23)
      • KC910 (23)
      • KC9105 (23)
      • KC9110 (23)
      • KC9120 (23)
      • KC9125 (23)
      • KC9225 (23)
      • KC9240 (23)
      • KC9240NEW (23)
      • KC9315 (23)
      • KC9320 (23)
      • KC9325 (23)
      • KC935 (23)
      • KC950 (23)
      • KC990 (23)
      • KCD25 (23)
      • KCK05 (23)
      • KCK05B (23)
      • KCK15 (23)
      • KCK15B (23)
      • KCK20 (23)
      • KCK20B (23)
      • KCM15 (23)
      • KCM15B (23)
      • KCM25 (23)
      • KCM25B (23)
      • KCM25S (23)
      • KCM35 (23)
      • KCP05 (23)
      • KCP10 (23)
      • KCP10B (23)
      • KCP20S (23)
      • KCP25 (23)
      • KCP25B (23)
      • KCP25C (23)
      • KCP30 (23)
      • KCS10 (23)
      • KCS10B (23)
      • KCS25S (23)
      • KCU10 (27)
      • KCU10B (23)
      • KCU25 (23)
      • KCU25B (23)
      • KD050 (23)
      • KD081 (23)
      • KD1400 (23)
      • KD1425 (23)
      • KN10S (23)
      • KT175 (23)
      • KT315 (23)
      • KT325 (23)
      • KTP10 (23)
      • KTP25S (23)
      • KU10 (23)
      • KU10T (23)
      • KU30T (23)
      • PB100 (23)
      • PB170 (23)
      • PB250 (23)
      • PB300 (23)
      • PD100 (23)
      • PD50 (23)
      • THM (23)
      • THM-X (23)
      • TN1000 (23)
      • TN10P (23)
      • TN10U (23)
      • TN15M (23)
      • TN15U (23)
      • TN2000 (23)
      • TN20K (23)
      • TN20P (23)
      • TN30M (23)
      • TN4000 (23)
      • TN5015 (23)
      • TN5020 (23)
      • TN5105 (23)
      • TN5120 (23)
      • TN7010 (23)
      • TN7015 (23)
      • TN7025 (23)
      • TN7035 (23)
      • TN7105 (23)
      • TN7110 (23)
      • TN7115 (23)
      • TN7125 (23)
      • TN7135 (23)
      • TN8025 (23)
      • TTI15 (23)
      • TTR (23)
      • TTS (23)
      • WBH10C (23)
      • WBH10P (23)
      • WBH10U (23)
      • WBH25P (23)
      • WDN00U (23)
      • WDN25U (23)
      • WK05CT (23)
      • WK15CT (23)
      • WK20CT (23)
      • WM15CT (23)
      • WM25CT (23)
      • WP15CT (23)
      • WP20TT (23)
      • WP25CT (23)
      • WS10PT (23)
      • WS25PT (23)
      • WU05PT (23)
      • WU10HT (23)
      • WU10PR (4)
      • WU10PT (23)
      • WU20HT (23)
      • WU25PT (23)
      Hand Of Tool
      Hand Of Tool
      • R (21)
      Wiper Insert
      Wiper Insert
      • N (21)
      F Dimension
      F Dimension
      • 0.151 mm(1)
      • 2.825 mm(2)
      • 3.825 mm(1)
      • 4.75 mm(1)
      • 4.775 mm(3)
      • 5.75 mm(2)
      • 5.775 mm(1)
      • 6.75 mm(2)
      • 6.775 mm(2)
      • 7.325 mm(1)
      • 7.75 mm(1)
      • 7.775 mm(2)
      • 9.775 mm(1)
      • 12.275 mm(1)
      F Dimension MinaF Dimension Max
      F Dimension
      F Dimension
      • 0.006 in(1)
      • 0.111 in(2)
      • 0.151 in(1)
      • 0.187 in(1)
      • 0.188 in(3)
      • 0.226 in(2)
      • 0.227 in(1)
      • 0.266 in(2)
      • 0.267 in(2)
      • 0.289 in(1)
      • 0.305 in(1)
      • 0.306 in(2)
      • 0.385 in(1)
      • 0.483 in(1)
      F Dimension MinaF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 2.0 mm(1)
      • 6.0 mm(2)
      • 8.0 mm(2)
      • 10.0 mm(4)
      • 12.0 mm(3)
      • 14.0 mm(4)
      • 15.0 mm(1)
      • 16.0 mm(3)
      • 20.0 mm(1)
      • 25.0 mm(1)
      • 29.0 mm(1)
      • 40.0 mm(1)
      • 52.0 mm(1)
      • 68.0 mm(1)
      • 76.0 mm(1)
      Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.079 in(1)
      • 0.237 in(2)
      • 0.315 in(2)
      • 0.394 in(4)
      • 0.473 in(3)
      • 0.551 in(4)
      • 0.591 in(1)
      • 0.63 in(3)
      • 0.787 in(1)
      • 0.984 in(1)
      • 1.143 in(1)
      • 1.575 in(1)
      • 2.047 in(1)
      • 2.677 in(1)
      • 2.992 in(1)
      Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 0.315 in(2)
      • 0.394 in(2)
      • 0.473 in(4)
      • 0.551 in(3)
      • 0.63 in(4)
      • 0.787 in(4)
      • 0.984 in(1)
      • 1.181 in(1)
      • 1.614 in(1)
      • 2.087 in(1)
      • 2.283 in(1)
      • 3.031 in(1)
      • 4.016 in(1)
      • 5.984 in(1)
      Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 8.0 mm(2)
      • 10.0 mm(2)
      • 12.0 mm(4)
      • 14.0 mm(3)
      • 16.0 mm(4)
      • 20.0 mm(4)
      • 25.0 mm(1)
      • 30.0 mm(1)
      • 41.0 mm(1)
      • 53.0 mm(1)
      • 58.0 mm(1)
      • 77.0 mm(1)
      • 102.0 mm(1)
      • 152.0 mm(1)
      Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • E (21)
      Rake Angle Style
      Rake Angle Style
      • NEGATIVE-ZERO (21)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.787 in(1)
      • 0.906 in(1)
      • 1.102 in(1)
      • 1.104 in(1)
      • 1.181 in(1)
      • 1.298 in(1)
      • 1.338 in(1)
      • 1.574 in(1)
      • 1.693 in(1)
      • 1.695 in(1)
      • 1.907 in(1)
      • 2.165 in(1)
      • 2.277 in(1)
      • 2.757 in(2)
      • 2.953 in(2)
      • 3.543 in(2)
      • 3.938 in(1)
      • 4.724 in(1)
      Maximum Bore Depth MinaMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 20.0 mm(1)
      • 23.0 mm(1)
      • 28.0 mm(1)
      • 28.05 mm(1)
      • 30.0 mm(1)
      • 32.975 mm(1)
      • 33.975 mm(1)
      • 39.975 mm(1)
      • 43.0 mm(1)
      • 43.051 mm(1)
      • 48.426 mm(1)
      • 55.0 mm(1)
      • 57.825 mm(1)
      • 70.0 mm(2)
      • 75.0 mm(2)
      • 90.0 mm(2)
      • 100.0 mm(1)
      • 120.0 mm(1)
      Maximum Bore Depth MinaMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (21)
      frontEnd
      Insert Shape
      Insert Shape
      • C-DIAMOND/RHOMBIC 80 (23)
      • W-TRIGON 80 (4)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.157 in(2)
      • 0.197 in(2)
      • 0.237 in(4)
      • 0.276 in(3)
      • 0.315 in(4)
      • 0.394 in(4)
      • 0.492 in(1)
      • 0.591 in(1)
      Maximum Cutting Depth MinaMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 4.0 mm(2)
      • 5.0 mm(2)
      • 6.0 mm(4)
      • 7.0 mm(3)
      • 8.0 mm(4)
      • 10.0 mm(4)
      • 12.5 mm(1)
      • 15.0 mm(1)
      Maximum Cutting Depth MinaMaximum Cutting Depth Max
      Gage Length
      Gage Length
      • 0.63 in(3)
      • 1.891 in(1)
      • 2.677 in(1)
      • 3.307 in(1)
      • 3.938 in(1)
      Gage Length
      Gage Length
      • 16 mm(3)
      • 100 mm(1)
      • 48 mm(1)
      • 68 mm(1)
      • 84 mm(1)
      insertGeometry
      Cutting Tool Material
      Cutting Tool Material
      • B H (23)
      • B L (23)
      • C N (23)
      • D P (23)
      • H T (23)
      • H W (23)
      backEnd
      System Size
      System Size
      • HSK63A (1)
      • KM50TS (1)
      Back-End Diameter
      Back-End Diameter
      • 16.0 mm(28)
      • 50.0 mm(1)
      • 63.0 mm(1)
      Back-End Diameter MinaBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.63 in(28)
      • 1.969 in(1)
      • 2.48 in(1)
      Back-End Diameter MinaBack-End Diameter Max
      No filters matching ""
      eBore™ Universal • Barra de mandrilar • Aço
      (12)

      eBore™ Universal • Barra de mandrilar • Aço

      eBore™ Universal • Diâmetro externo de contrapeso
      (1)

      eBore™ Universal • Diâmetro externo de contrapeso

      eBore™ Universal • Extensão
      (2)

      eBore™ Universal • Extensão

      eBore™ Universal • Diâmetro interno do suporte para insertos • CC06
      (1)

      eBore™ Universal • Diâmetro interno do suporte para insertos • CC06

      eBore™ Universal • Barra de mandrilar • Metal duro
      (7)

      eBore™ Universal • Barra de mandrilar • Metal duro

      eBore™ Universal • Parafuso de montagem para suporte de insertos de montagem reta
      (1)

      eBore™ Universal • Parafuso de montagem para suporte de insertos de montagem reta

      eBore™ Universal • Barra de mandrilar • Metal pesado
      (2)

      eBore™ Universal • Barra de mandrilar • Metal pesado

      eBore™ Universal • I.D. suporte para insertos para ID/OD
      (3)

      eBore™ Universal • I.D. suporte para insertos para ID/OD

      eBore™ Universal • Diâmetro externo do suporte para insertos • CC06
      (1)

      eBore™ Universal • Diâmetro externo do suporte para insertos • CC06

      eBore™ • Cabeçote• Universal• KM™
      (1)

      eBore™ • Cabeçote• Universal• KM™

      eBore™ Universal • Suporte para insertos para montagem reta • CC06
      (2)

      eBore™ Universal • Suporte para insertos para montagem reta • CC06

      eBore™ Universal • Diâmetro interno de contrapeso
      (1)

      eBore™ Universal • Diâmetro interno de contrapeso

      eBore™ Universal • Conector de refrigeração
      (1)

      eBore™ Universal • Conector de refrigeração

      eBore™ • Universal • Cabeçote • HSK63A
      (1)

      eBore™ • Universal • Cabeçote • HSK63A

      eBore™ Universal • Suporte para insertos para extensão • CC06
      (2)

      eBore™ Universal • Suporte para insertos para extensão • CC06

      eBore™ Universal • Conector de refrigeração
      (1)

      eBore™ Universal • Conector de refrigeração

      Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
      Select the destination where you want to move a.
      Novo Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Digite um nome válido
      product-image
      Please adjust the following properties from

      Código de catálogo ISO

      Número do catálogo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Você deve ser registrado para ver as informações do seu painel
      Session expired due to inactivity, please login again
      Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
      itens adicionados com sucesso ao carrinho
      Ver o carrinho

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Código de catálogo ISO Classe  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk