Fixação de estilo S • Para insertos de estilo positivo
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (110)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(110)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(110)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(110)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(110)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(110)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(110)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(110)
- M Stainless Steel (105)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(105)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(102)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(102)
- K Cast Iron (110)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(110)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(110)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(110)
- N Non-Ferrous Materials (110)
- N1Wrought Aluminum (110)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(110)
- N3High-Silicon Aluminum Alloys Si >12.2%(75)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (109)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (84)
- N6Carbon, Graphite Composites, CFRP (82)
- N7MMC's (81)
- S High-Temp Alloys (109)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(109)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(109)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(109)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(105)
- H Hardened Materials (80)
- H1Hardened Materials 44-48 HRC(80)
- H2Hardened Materials 48-55 HRC(80)
- H3Hardened Materials 56-60 HRC(80)
- H4Hardened Materials >60 HRC(80)
Select All Star
- DE (18)
- SG (4)
- US (3)
Applications
Applications
Facing (44)
Multiple Direction Cutting (96)
Profiling (97)
Turning (105)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (100)
- Lightly Interrupted Cut (110)
- Smooth Cut (110)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (6)
- 62.5 (7)
- 72.5 (4)
- 75.0 (5)
- 90.0 (17)
- 93.0 (36)
- 95.0 (23)
- 107.5 (14)
a
Connection Style
Connection Style
- Boring Bar Shank (5)
- Toolholder (107)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (84)
- 2.0 (85)
- 3.0 (4)
- 4.0 (35)
a
Over All Length [L]
Over All Length [L]
- 2.5 in(1)
- 2.7559 in(3)
- 3.1496 in(7)
- 3.15 in(1)
- 3.5 in(5)
- 3.937 in(16)
- 4.0 in(2)
- 4.5 in(4)
- 4.911 in(1)
- 4.921 in(4)
- 4.9213 in(22)
- 5.5118 in(1)
- 5.896 in(1)
- 5.9055 in(25)
- 5.906 in(3)
- 6.0 in(5)
- 6.6929 in(10)
- 7.874 in(1)
a
Over All Length [L]
Over All Length [L]
- 63.5 mm(1)
- 70.0 mm(3)
- 80.0 mm(8)
- 88.9 mm(5)
- 100.0 mm(16)
- 101.6 mm(2)
- 114.3 mm(4)
- 124.75 mm(1)
- 125.0 mm(26)
- 140.0 mm(1)
- 149.75 mm(1)
- 150.0 mm(28)
- 152.4 mm(5)
- 170.0 mm(10)
- 200.0 mm(1)
a
Corner Radius
Corner Radius
- 0.004 in(62)
- 0.008 in(77)
- 0.016 in(100)
- 0.031 in(100)
- 0.047 in(77)
- 0.063 in(9)
- 0.118 in(3)
- 0.157 in(3)
- 0.197 in(2)
- 0.236 in(2)
a
Corner Radius
Corner Radius
- 0.1 mm(62)
- 0.2 mm(77)
- 0.4 mm(100)
- 0.8 mm(100)
- 1.2 mm(77)
- 1.6 mm(9)
- 3.0 mm(3)
- 4.0 mm(3)
- 5.0 mm(2)
- 6.0 mm(2)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (1)
- CG6 (1)
- CM1 (1)
- HCK10 (19)
- HWK15 (9)
- PB100 (5)
- PB250 (5)
- THM (105)
- THM-X (44)
- TN10P (61)
- TN10U (75)
- TN15M (53)
- TN15U (37)
- TN2000 (66)
- TN20K (86)
- TN20P (95)
- TN30M (77)
- TN4000 (44)
- TN6010 (31)
- TN6025 (31)
- TTM09 (7)
- TTR (21)
- TTS (5)
- W00162 (4)
- WBH10P (62)
- WBH10U (15)
- WBH20P (48)
- WBH30P (58)
- WBK45U (5)
- WDN00U (18)
- WDN25U (74)
- WK05CT (19)
- WK15CT (77)
- WK20CT (97)
- WM15CT (61)
- WM25CT (99)
- WP15CT (109)
- WP20TT (26)
- WP25CT (109)
- WP35CT (47)
- WS10PT (57)
- WS25PT (52)
- WU05PT (56)
- WU10HT (77)
- WU10PT (73)
- WU25PT (86)
Hand Of Tool
Hand Of Tool
- L (38)
- N (23)
- R (51)
Wiper Insert
Wiper Insert
- N (110)
- Y (13)
F Dimension
F Dimension
- 4.0 mm(1)
- 6.0 mm(1)
- 6.35 mm(1)
- 7.0 mm(2)
- 8.0 mm(1)
- 9.0 mm(2)
- 10.0 mm(2)
- 11.0 mm(2)
- 12.0 mm(5)
- 12.5 mm(6)
- 12.7 mm(2)
- 13.0 mm(2)
- 14.0 mm(1)
- 15.0 mm(2)
- 15.875 mm(3)
- 15.88 mm(1)
- 16.0 mm(7)
- 16.5 mm(1)
- 17.0 mm(2)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.05 mm(2)
- 20.0 mm(12)
- 22.0 mm(1)
- 25.0 mm(18)
- 25.4 mm(4)
- 31.75 mm(4)
- 32.0 mm(24)
a
F Dimension
F Dimension
- 0.1575 in(1)
- 0.2362 in(1)
- 0.25 in(1)
- 0.276 in(2)
- 0.315 in(1)
- 0.354 in(2)
- 0.3937 in(2)
- 0.433 in(1)
- 0.4331 in(1)
- 0.4724 in(5)
- 0.492 in(1)
- 0.4921 in(5)
- 0.5 in(2)
- 0.5118 in(2)
- 0.5512 in(1)
- 0.5906 in(2)
- 0.625 in(4)
- 0.6299 in(6)
- 0.63 in(1)
- 0.6496 in(1)
- 0.669 in(2)
- 0.689 in(1)
- 0.709 in(1)
- 0.7283 in(1)
- 0.75 in(2)
- 0.7874 in(12)
- 0.8661 in(1)
- 0.984 in(1)
- 0.9843 in(17)
- 1.0 in(4)
- 1.25 in(4)
- 1.2598 in(22)
- 1.26 in(2)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 13.0 mm(2)
- 16.0 mm(2)
- 20.0 mm(1)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.512 in(2)
- 0.63 in(2)
- 0.787 in(1)
a
Cutting Direction
Cutting Direction
- B (33)
- E (4)
- S (75)
Rake Angle Style
Rake Angle Style
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (5)
- NEUTRAL (ZERO) (105)
- POSITIVE-ZERO (1)
Maximum Bore Depth
Maximum Bore Depth
- 1.56 in(2)
- 1.88 in(2)
- 2.52 in(1)
a
Maximum Bore Depth
Maximum Bore Depth
- 40.0 mm(2)
- 48.0 mm(2)
- 64.0 mm(1)
a
Boring Bar Material
Boring Bar Material
- S (5)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (25)
- D-DIAMOND/RHOMBIC 55 (39)
- R-ROUND (11)
- S-SQUARE 90 (11)
- T-TRIANGLE 60 (4)
- V-DIAMOND/RHOMBIC 35 (22)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.6299 in(2)
- 0.7756 in(2)
- 0.7874 in(2)
- 0.9843 in(3)
- 1.1024 in(1)
- 1.378 in(1)
a
Maximum Cutting Depth
Maximum Cutting Depth
- 16.0 mm(2)
- 19.7 mm(2)
- 20.0 mm(2)
- 25.0 mm(3)
- 28.0 mm(1)
- 35.0 mm(1)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (20)
- B L (70)
- D P (74)
- H T (26)
- H W (110)
backEnd
Connection Type
Connection Type
- BORING BAR (5)
- SQUARE SHANK (107)
Back-End Diameter
Back-End Diameter
- 10.0 mm(2)
- 12.0 mm(2)
- 16.0 mm(1)
a
Shank Height
Shank Height
- 0.315 in(1)
- 0.375 in(1)
- 0.3937 in(4)
- 0.472 in(1)
- 0.4724 in(7)
- 0.5 in(5)
- 0.625 in(2)
- 0.6299 in(16)
- 0.75 in(4)
- 0.787 in(3)
- 0.7874 in(22)
- 0.984 in(2)
- 0.9843 in(24)
- 1.0 in(5)
- 1.2598 in(10)
a
Shank Height
Shank Height
- 8.0 mm(1)
- 9.52 mm(1)
- 10.0 mm(4)
- 12.0 mm(8)
- 12.7 mm(5)
- 15.88 mm(2)
- 16.0 mm(16)
- 19.05 mm(4)
- 20.0 mm(25)
- 25.0 mm(26)
- 25.4 mm(5)
- 32.0 mm(10)
a
Shank Width
Shank Width
- 0.315 in(1)
- 0.375 in(1)
- 0.3937 in(4)
- 0.472 in(1)
- 0.4724 in(7)
- 0.5 in(5)
- 0.625 in(2)
- 0.6299 in(16)
- 0.75 in(4)
- 0.787 in(3)
- 0.7874 in(22)
- 0.984 in(2)
- 0.9843 in(34)
- 1.0 in(5)
a
Shank Width
Shank Width
- 8.0 mm(1)
- 9.52 mm(1)
- 10.0 mm(4)
- 12.0 mm(8)
- 12.7 mm(5)
- 15.88 mm(2)
- 16.0 mm(16)
- 19.05 mm(4)
- 20.0 mm(25)
- 25.0 mm(36)
- 25.4 mm(5)
a
No filters matching ""
