Fixação de estilo C • Para insertos de cerâmica
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (10)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
- M Stainless Steel (2)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
- K Cast Iron (21)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
- N Non-Ferrous Materials (10)
- N1Wrought Aluminum (10)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N6Carbon, Graphite Composites, CFRP (2)
- N7MMC's (2)
- S High-Temp Alloys (19)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
- H Hardened Materials (19)
- H1Hardened Materials 44-48 HRC(19)
- H2Hardened Materials 48-55 HRC(19)
- H3Hardened Materials 56-60 HRC(19)
- H4Hardened Materials >60 HRC(19)
Applications
Applications
Facing (26)
Multiple Direction Cutting (20)
Profiling (12)
Turning (26)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (4)
- Lightly Interrupted Cut (10)
- Smooth Cut (18)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (6)
- 75.0 (1)
- 90.0 (17)
- 93.0 (2)
- 95.0 (2)
a
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (6)
- 2.0 (8)
- 3.0 (6)
- 4.0 (7)
- 8.0 (1)
a
Over All Length [L]
Over All Length [L]
- 3.15 in(2)
- 4.921 in(4)
- 5.906 in(14)
- 6.0 in(2)
- 6.694 in(6)
a
Over All Length [L]
Over All Length [L]
- 80.0 mm(2)
- 125.0 mm(4)
- 150.0 mm(14)
- 152.4 mm(2)
- 170.0 mm(6)
a
Corner Radius
Corner Radius
- 0.016 in(11)
- 0.031 in(13)
- 0.047 in(14)
- 0.063 in(3)
- 0.25 in(8)
a
Corner Radius
Corner Radius
- 0.4 mm(11)
- 0.8 mm(13)
- 1.201 mm(14)
- 1.6 mm(3)
- 6.351 mm(8)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (2)
- CW2015 (19)
- CW3020 (9)
- CW5025 (13)
- HK1500 (2)
- HK15M (2)
- PB100 (6)
- PB250 (6)
- RC3503 (2)
- SP0A00 (6)
- SP0B00 (4)
- SP0NTA (4)
- SPTM00 (2)
- THM (11)
- THM-F (6)
- THM-X (10)
- THMF-X (6)
- TN2000 (2)
- TN35 (6)
- TN4000 (2)
- TN5015 (6)
- TN5120 (6)
- TN7010 (6)
- TN7015 (6)
- TN7025 (2)
- TN7035 (6)
- TN7110 (6)
- TN7115 (6)
- TN7125 (2)
- TN7135 (4)
- TTI15 (6)
- TTM08 (6)
- TTM09 (8)
- TTMS (2)
- TTR (2)
- TTR-X (2)
- TTS (6)
- TTX (2)
- WBH20P (4)
- WBH25U (2)
- WBK40U (5)
- WDN25U (6)
- WK20CT (10)
- WP15CT (10)
- WP25CT (2)
- WP35CT (10)
Hand Of Tool
Hand Of Tool
- L (3)
- N (13)
- R (12)
Wiper Insert
Wiper Insert
- N (22)
- Y (1)
F Dimension
F Dimension
- 6.0 mm(1)
- 9.951 mm(1)
- 10.0 mm(1)
- 12.5 mm(8)
- 12.701 mm(2)
- 16.0 mm(2)
- 22.0 mm(1)
- 25.0 mm(3)
- 32.0 mm(9)
a
F Dimension
F Dimension
- 0.237 in(1)
- 0.392 in(1)
- 0.394 in(1)
- 0.492 in(8)
- 0.5 in(2)
- 0.63 in(2)
- 0.866 in(1)
- 0.984 in(3)
- 1.26 in(9)
a
Cutting Direction
Cutting Direction
- B (9)
- E (2)
- S (17)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (6)
- NEGATIVE-ZERO (7)
- NEUTRAL (ZERO) (4)
- POSITIVE-ZERO (11)
frontEnd
Clamp Style
Clamp Style
- C (26)
- N (2)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (12)
- S-SQUARE 90 (6)
- T-TRIANGLE 60 (6)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.748 in(1)
- 1.143 in(2)
- 1.496 in(1)
a
Maximum Cutting Depth
Maximum Cutting Depth
- 19.0 mm(1)
- 29.0 mm(2)
- 38.0 mm(1)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (11)
- B L (4)
- C A (19)
- C N (13)
- D P (6)
- H T (6)
- H W (11)
backEnd
Shank Height
Shank Height
- 0.473 in(2)
- 0.787 in(4)
- 0.984 in(14)
- 1.0 in(2)
- 1.26 in(6)
a
Shank Height
Shank Height
- 12.0 mm(2)
- 20.0 mm(4)
- 25.0 mm(14)
- 25.401 mm(2)
- 32.0 mm(6)
a
Shank Width
Shank Width
- 0.394 in(1)
- 0.473 in(2)
- 0.787 in(4)
- 0.984 in(18)
- 1.0 in(2)
- 1.26 in(1)
a
Shank Width
Shank Width
- 10.0 mm(1)
- 12.0 mm(2)
- 20.0 mm(4)
- 25.0 mm(18)
- 25.401 mm(2)
- 32.0 mm(1)
a
No filters matching ""
