Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

Fixação-S

Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (9)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
    • M Stainless Steel (9)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
    • K Cast Iron (9)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
    • N Non-Ferrous Materials (9)
      • N1
        Wrought Aluminum (9)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(9)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(9)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
      • N6
        Carbon, Graphite Composites, CFRP (9)
      • N7
        MMC's (9)
    • S High-Temp Alloys (9)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
    • H Hardened Materials (9)
      • H1
        Hardened Materials 44-48 HRC(9)
      • H2
        Hardened Materials 48-55 HRC(9)
      • H3
        Hardened Materials 56-60 HRC(9)
      • H4
        Hardened Materials >60 HRC(9)
    • C CFRP Materials (9)
      • C1
        CFRP, CFRP / CFRP (9)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (9)
    Applications
    Applications
    • FacingFacing (4)
    • ID FacingID Facing (4)
    • Multiple Direction CuttingMultiple Direction Cutting (9)
    • TRN BoringTRN Boring (4)
    • TurningTurning (4)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (9)
    • Lightly Interrupted Cut (9)
    • Smooth Cut (9)
    • Varying Depth of Cut (9)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 93.0 (2)
    • 95.0 (3)
    • 107.5 (4)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (6)
    • 2.0 (9)
    • 4.0 (3)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 3.543 in(1)
    • 4.724 in(2)
    • 5.513 in(4)
    • 5.71 in(1)
    • 6.891 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 90.0 mm(1)
    • 120.0 mm(2)
    • 140.0 mm(4)
    • 145.0 mm(1)
    • 175.0 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(2)
    • 0.001 in(2)
    • 0.002 in(6)
    • 0.004 in(9)
    • 0.008 in(9)
    • 0.016 in(9)
    • 0.031 in(9)
    • 0.047 in(7)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(2)
    • 0.025 mm(2)
    • 0.05 mm(6)
    • 0.1 mm(9)
    • 0.2 mm(9)
    • 0.4 mm(9)
    • 0.8 mm(9)
    • 1.201 mm(7)
    Corner Radius MinaCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK10 (3)
    • HK1500 (4)
    • HK35 (3)
    • HT2 (9)
    • HTX (9)
    • HWK15 (3)
    • K10M (9)
    • K10P (5)
    • K10U (6)
    • K15U (6)
    • K20K (5)
    • K25M (6)
    • K25P (6)
    • K313 (9)
    • K68 (9)
    • KB1345 (3)
    • KB1610 (4)
    • KB1625 (4)
    • KB1630 (3)
    • KB5610 (4)
    • KB5625 (4)
    • KB5630 (4)
    • KB9610 (4)
    • KBH10 (6)
    • KBH20 (9)
    • KC5010 (9)
    • KC5020P (6)
    • KC5025 (9)
    • KC5410 (9)
    • KC720 (9)
    • KC730 (9)
    • KC732 (9)
    • KC8050 (9)
    • KC810 (9)
    • KC850 (9)
    • KC9025 (9)
    • KC910 (9)
    • KC9105 (9)
    • KC9110 (9)
    • KC9125 (9)
    • KC9225 (9)
    • KC9240 (9)
    • KC9240NEW (9)
    • KC9315 (9)
    • KC9320 (9)
    • KC9325 (3)
    • KC935 (9)
    • KC950 (4)
    • KCD25 (9)
    • KCK05 (9)
    • KCK05B (6)
    • KCK15 (7)
    • KCK15B (7)
    • KCK20 (9)
    • KCK20B (9)
    • KCM15 (9)
    • KCM15B (7)
    • KCM25 (9)
    • KCM25B (9)
    • KCM35 (7)
    • KCP05 (9)
    • KCP05B (4)
    • KCP10 (9)
    • KCP10B (9)
    • KCP15 (4)
    • KCP25 (9)
    • KCP25B (9)
    • KCP25C (9)
    • KCP30 (9)
    • KCP30B (3)
    • KCP40B (4)
    • KCS10 (9)
    • KCS10B (9)
    • KCU10 (9)
    • KCU10B (9)
    • KCU25 (9)
    • KCU25B (9)
    • KD050 (4)
    • KD081 (4)
    • KD100 (4)
    • KD1400 (6)
    • KD1405 (4)
    • KD1425 (6)
    • KN10S (2)
    • KT175 (6)
    • KT315 (9)
    • KT325 (9)
    • KTP10 (6)
    • KTP25S (6)
    • KU10 (6)
    • KU10T (9)
    • KU30T (9)
    • NL300 (3)
    • NL920 (3)
    • PB170 (3)
    • PB250 (3)
    • PD100 (3)
    • PD50 (3)
    • SP0PW3 (3)
    • SP4019 (3)
    • THM (7)
    • THM-X (3)
    • TN10P (9)
    • TN10U (9)
    • TN15M (9)
    • TN15U (6)
    • TN2000 (7)
    • TN20K (9)
    • TN20P (9)
    • TN30M (9)
    • TN4000 (4)
    • TN5015 (3)
    • TN5020 (7)
    • TN5105 (3)
    • TN5120 (7)
    • TN6010 (3)
    • TN7005 (4)
    • TN7010 (7)
    • TN7015 (7)
    • TN7025 (7)
    • TN7035 (7)
    • TN7105 (7)
    • TN7110 (7)
    • TN7115 (7)
    • TN7125 (7)
    • TN7135 (7)
    • TN8025 (3)
    • TTI15 (4)
    • TTR (3)
    • TTX (4)
    • W00342 (3)
    • WBH10C (4)
    • WBH10P (4)
    • WBH10U (4)
    • WBH20P (3)
    • WBH25P (4)
    • WBH25U (4)
    • WBH30P (4)
    • WBK45U (3)
    • WDN25U (6)
    • WK05CT (3)
    • WK15CT (7)
    • WK20CT (7)
    • WM15CT (9)
    • WM25CT (9)
    • WP15CT (9)
    • WP25CT (9)
    • WP35CT (7)
    • WS10PT (3)
    • WU05PT (3)
    • WU10HT (7)
    • WU10PT (9)
    • WU25PT (7)
    Hand Of Tool
    Hand Of Tool
    • L (5)
    • R (4)
    Wiper Insert
    Wiper Insert
    • N (9)
    • Y (3)
    F Dimension
    F Dimension
    • 22.0 mm(5)
    • 27.0 mm(3)
    • 35.0 mm(1)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.866 in(5)
    • 1.063 in(3)
    • 1.379 in(1)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 40.0 mm(5)
    • 50.0 mm(3)
    • 63.0 mm(1)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.575 in(5)
    • 1.969 in(3)
    • 2.48 in(1)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (3)
    • E (6)
    Maximum Bore Depth
    Maximum Bore Depth
    • 2.525 in(1)
    • 3.701 in(2)
    • 4.493 in(2)
    • 4.532 in(2)
    • 4.724 in(1)
    • 5.984 in(1)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 64.125 mm(1)
    • 94.0 mm(2)
    • 114.125 mm(2)
    • 115.101 mm(2)
    • 120.0 mm(1)
    • 152.0 mm(1)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (3)
    • V-DIAMOND/RHOMBIC 35 (6)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (7)
    • B L (9)
    • D P (9)
    • H T (9)
    • H W (9)
    No filters matching ""
    SVUB 93°
    (2)

    SVUB 93°

    SVQB 107° 30'
    (4)

    SVQB 107° 30'

    SCLC 95°
    (3)

    SCLC 95°

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk