Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (7)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(7)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(7)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(7)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(7)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(7)
- M Stainless Steel (7)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(7)
- K Cast Iron (7)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(7)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(7)
- N Non-Ferrous Materials (7)
- N1Wrought Aluminum (7)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
- N3High-Silicon Aluminum Alloys Si >12.2%(7)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (7)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
- N6Carbon, Graphite Composites, CFRP (7)
- N7MMC's (7)
- S High-Temp Alloys (7)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(7)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(7)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(7)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(7)
- H Hardened Materials (7)
- H1Hardened Materials 44-48 HRC(7)
- H2Hardened Materials 48-55 HRC(7)
- H3Hardened Materials 56-60 HRC(7)
- H4Hardened Materials >60 HRC(7)
Applications
Applications
- Chamfer Turning (4)
- Cut-Off (4)
- Deep Grooving (4)
- Face Grooving (4)
- Facing (4)
- Grooving (6)
- ID Grooving (1)
- ID Thread Turning (2)
- Multiple Direction Cutting (4)
- OD Thread Turning (6)
- Plunge Turning (4)
- Profiling (4)
- TRN Boring (3)
- Threading (6)
- Turning (4)
Type of Thread
Type of Thread
- 60 (7)
- ACME (4)
- API (4)
- API RD (4)
- BSW (4)
- BUTTRESS (7)
- M (5)
- NPT (4)
- STUB ACME (4)
- UN (7)
- UNJ (4)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (7)
- Lightly Interrupted Cut (7)
- Smooth Cut (7)
Connection Style
Connection Style
- KM (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (7)
- 2.0 (7)
a
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.379 in(5)
- 1.575 in(2)
a
Over All Length [L]
Over All Length [L]
- 35.0 mm(5)
- 40.0 mm(2)
a
Corner Radius
Corner Radius
- 0.002 in(4)
- 0.003 in(7)
- 0.004 in(7)
- 0.005 in(4)
- 0.006 in(4)
- 0.007 in(5)
- 0.008 in(7)
- 0.01 in(5)
- 0.011 in(4)
- 0.012 in(4)
- 0.014 in(4)
- 0.016 in(4)
- 0.019 in(4)
- 0.02 in(7)
- 0.023 in(4)
- 0.03 in(3)
- 0.031 in(7)
- 0.035 in(4)
- 0.039 in(7)
- 0.047 in(7)
- 0.049 in(7)
- 0.06 in(7)
- 0.062 in(4)
- 0.063 in(7)
- 0.069 in(7)
- 0.078 in(4)
- 0.079 in(4)
- 0.089 in(4)
- 0.095 in(4)
a
Corner Radius
Corner Radius
- 0.05 mm(4)
- 0.076 mm(7)
- 0.1 mm(7)
- 0.125 mm(4)
- 0.151 mm(4)
- 0.176 mm(5)
- 0.2 mm(7)
- 0.225 mm(4)
- 0.25 mm(5)
- 0.275 mm(4)
- 0.301 mm(4)
- 0.325 mm(4)
- 0.351 mm(4)
- 0.4 mm(4)
- 0.45 mm(4)
- 0.476 mm(2)
- 0.5 mm(7)
- 0.576 mm(4)
- 0.75 mm(3)
- 0.775 mm(7)
- 0.9 mm(4)
- 1.0 mm(7)
- 1.201 mm(7)
- 1.25 mm(7)
- 1.5 mm(7)
- 1.576 mm(4)
- 1.6 mm(7)
- 1.75 mm(7)
- 1.975 mm(4)
- 2.0 mm(4)
- 2.25 mm(4)
- 2.401 mm(4)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K2885 (7)
- K313 (7)
- K420 (7)
- K4H (6)
- K68 (7)
- KB1345 (4)
- KB1630 (4)
- KB5625 (4)
- KBH20 (2)
- KC250 (7)
- KC5010 (7)
- KC5025 (7)
- KC5410 (7)
- KC710 (7)
- KC720 (7)
- KC722 (7)
- KC730 (7)
- KC732 (4)
- KC810 (7)
- KC850 (7)
- KC910 (6)
- KC9110 (7)
- KC9120 (4)
- KC9320 (7)
- KC935 (7)
- KC950 (7)
- KCK20 (6)
- KCK20B (7)
- KCP10B (7)
- KCP25B (7)
- KCP25C (7)
- KCU10 (7)
- KCU10B (7)
- KCU25 (7)
- KCU25B (7)
- KD050 (2)
- KD081 (4)
- KD100 (4)
- KD120 (4)
- KD1425 (4)
- KT175 (7)
- KT315 (7)
- KU10T (7)
- KU25T (7)
- KU30T (7)
- KY3000 (4)
- THM (7)
- TN10P (6)
- TN6010 (7)
- TN6025 (7)
- TN7110 (7)
- WU10HT (2)
- WU10PT (2)
- WU25PT (2)
Hand Of Tool
Hand Of Tool
- L (2)
- R (2)
F Dimension
F Dimension
- 22.0 mm(4)
a
F Dimension
F Dimension
- 0.866 in(4)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(4)
- 41.301 mm(2)
- 44.0 mm(3)
- 47.6 mm(2)
- 56.625 mm(2)
- 88.9 mm(4)
- 139.701 mm(2)
- 174.601 mm(2)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(4)
- 1.627 in(2)
- 1.732 in(3)
- 1.874 in(2)
- 2.229 in(2)
- 3.5 in(4)
- 5.5 in(2)
- 6.875 in(2)
a
Cutting Direction
Cutting Direction
- E (4)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
- 1.379 in(3)
a
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(3)
a
frontEnd
Cutting Width
Cutting Width
- 0.02 in(3)
- 0.031 in(3)
- 0.035 in(3)
- 0.039 in(7)
- 0.041 in(3)
- 0.047 in(7)
- 0.055 in(3)
- 0.058 in(3)
- 0.06 in(7)
- 0.062 in(7)
- 0.067 in(3)
- 0.069 in(7)
- 0.073 in(4)
- 0.077 in(3)
- 0.078 in(4)
- 0.079 in(7)
- 0.088 in(7)
- 0.089 in(5)
- 0.094 in(2)
- 0.095 in(7)
- 0.097 in(4)
- 0.098 in(7)
- 0.105 in(4)
- 0.108 in(7)
- 0.11 in(4)
- 0.119 in(7)
- 0.122 in(4)
- 0.125 in(7)
- 0.126 in(7)
- 0.128 in(7)
- 0.129 in(3)
- 0.131 in(2)
- 0.138 in(7)
- 0.143 in(4)
- 0.147 in(1)
- 0.15 in(2)
- 0.151 in(1)
- 0.152 in(3)
- 0.156 in(4)
- 0.157 in(4)
- 0.167 in(4)
- 0.169 in(4)
- 0.177 in(4)
- 0.178 in(4)
- 0.185 in(4)
- 0.188 in(4)
- 0.189 in(4)
- 0.192 in(2)
- 0.193 in(2)
- 0.195 in(4)
- 0.196 in(4)
a
Cutting Width
Cutting Width
- 0.5 mm(3)
- 0.775 mm(3)
- 0.8 mm(3)
- 0.9 mm(3)
- 1.0 mm(7)
- 1.05 mm(3)
- 1.201 mm(7)
- 1.401 mm(3)
- 1.475 mm(3)
- 1.5 mm(7)
- 1.576 mm(7)
- 1.701 mm(3)
- 1.75 mm(7)
- 1.826 mm(4)
- 1.951 mm(3)
- 1.975 mm(4)
- 2.0 mm(7)
- 2.2 mm(7)
- 2.225 mm(7)
- 2.25 mm(5)
- 2.375 mm(2)
- 2.401 mm(7)
- 2.475 mm(4)
- 2.5 mm(7)
- 2.676 mm(4)
- 2.75 mm(7)
- 2.801 mm(4)
- 3.0 mm(7)
- 3.1 mm(4)
- 3.176 mm(7)
- 3.2 mm(7)
- 3.25 mm(7)
- 3.276 mm(3)
- 3.325 mm(2)
- 3.5 mm(7)
- 3.6 mm(4)
- 3.725 mm(1)
- 3.801 mm(2)
- 3.825 mm(1)
- 3.85 mm(3)
- 3.95 mm(4)
- 3.975 mm(2)
- 4.0 mm(4)
- 4.25 mm(4)
- 4.3 mm(4)
- 4.5 mm(4)
- 4.525 mm(4)
- 4.7 mm(4)
- 4.775 mm(4)
- 4.801 mm(4)
- 4.875 mm(2)
- 4.9 mm(2)
- 4.95 mm(4)
- 4.976 mm(4)
a
Insert Size
Insert Size
- 2 (3)
- 3 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.138 in(1)
- 0.21 in(1)
a
Maximum Cutting Depth
Maximum Cutting Depth
- 3.5 mm(1)
- 5.325 mm(1)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (4)
- B L (4)
- C N (4)
- D P (4)
- H T (7)
- H W (7)
backEnd
Connection Type
Connection Type
- TAPER SHANK (4)
System Size
System Size
- KM32 (3)
- KM32TS (1)
No filters matching ""