Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Itens adicionado com sucesso ao carrinho
Ver o carrinho
Exit Search Voltar à solução

Editando solução

Adicionando solução

Nome da solução:{{SolutionName}}

    Produto semelhante ao:

    voltar a | Modificar semelhante a

    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch

    Series 4X6E • Square End • 4 Flutes • Weldon® Shank • Inch

    Número de material100703880

    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    Open expanded view
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch+1
    VariMill™ XTREME™ • Series 4X6E • Square End • 4 Flute • Weldon® Shank • Inch
    Representação genérica
    Entre em contacto com a nossa equipa Comercial  para saber todas as suas opções de preços
    • Trochoidal MillingTrochoidal Milling
    • DrillingDrilling
    • Helical MillingHelical Milling
    • Fresamento de rampa: blankFresamento de rampa: blank
    • Abertura de canal: topo retoAbertura de canal: topo reto
    • Fresamento lateral/fresamento de canto: topo retoFresamento lateral/fresamento de canto: topo reto
    • Fresamento de mergulhoFresamento de mergulho
    Grupo de materialproduct data image 38166product data image 38157product data image 100776389
    Fresamento lateral (A) e canal (B)WS15PERecommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%.
    ABVelocidade de corte Vc SFMD1 Diâmetro
    apaeapMín.InícioMáx.pol 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1
    P01.5 x D10.5 x D11.25 x D1490580660IPT.0009.0016.0019.0026.0031.0036.0044.0049.0054
    11.5 x D10.5 x D11.25 x D1490580660IPT.0009.0016.0019.0026.0031.0036.0044.0049.0054
    21.5 x D10.5 x D11.25 x D1460540620IPT.0009.0016.0019.0026.0031.0036.0044.0049.0054
    31.5 x D10.5 x D11.25 x D1390450520IPT.0007.0013.0016.0022.0026.0030.0038.0044.0049
    41.5 x D10.5 x D11.25 x D1300400490IPT.0007.0012.0014.0019.0023.0027.0033.0038.0042
    51.5 x D10.5 x D11.25 x D1200260330IPT.0006.0011.0013.0017.0021.0024.0030.0035.0039
    61.5 x D10.5 x D11.25 x D1160200250IPT.0005.0009.0011.0015.0017.0020.0025.0028.0031
    M11.5 x D10.5 x D11.25 x D1300340380IPT.0007.0013.0016.0022.0026.0030.0038.0044.0049
    21.5 x D10.5 x D11.25 x D1200230260IPT.0006.0011.0013.0017.0021.0024.0030.0035.0039
    31.5 x D10.5 x D11.0 x D1200210230IPT.0005.0009.0011.0015.0017.0020.0025.0028.0031
    K11.5 x D10.5 x D11.0 x D1390440490IPT.0009.0016.0019.0026.0031.0036.0044.0049.0054
    21.5 x D10.5 x D11.0 x D1360410460IPT.0007.0013.0016.0022.0026.0030.0038.0044.0049
    31.5 x D10.5 x D11.0 x D1360390430IPT.0006.0011.0013.0017.0021.0024.0030.0035.0039
    S11.5 x D10.5 x D10.75 x D1160230300IPT.0007.0013.0016.0022.0026.0030.0038.0044.0049
    21.5 x D10.5 x D10.75 x D1160210260IPT.0006.0011.0013.0017.0021.0024.0030.0035.0039
    31.5 x D10.5 x D10.5 x D180100130IPT.0004.0007.0008.0011.0014.0016.0020.0023.0027
    41.5 x D10.5 x D11.25 x D1160180200IPT.0005.0009.0011.0016.0019.0022.0028.0032.0036
    H11.5 x D10.5 x D11.0 x D1260360460IPT.0007.0012.0014.0019.0023.0027.0033.0038.0042
    21.5 x D10.5 x D11.0 x D1230310390IPT.0005.0009.0011.0015.0017.0020.0025.0028.0031
    NOTA: Consulte a página XX para obter mais informações sobre os fatores de ajuste VARIMILL™ XTREME™ para cálculos de avanço.
    Helical Interpolation/Ramping 0° 15°
    product data image 37436product data image 37438Avanço por faca recomendado (fz = mm/faca) para fresamento em 3D/perfilamento (A)
    WS15PEdiâmetro
    Velocidade de corte Vc SFMpol1/83/161/45/163/81/25/83/41
    Grupo de materialMax DepthminStartmaxmin-max.144 - .238.216 - .356.288 - .475.359 - .594.431 - .713.575 - 950.719 - 1.188.863 - 1.4251.150 - 1.900
    P01.25 x D1490580660fz.0009.0016.0019.0026.0031.0036.0044.0049.0054
    11.25 x D1490580660fz.0009.0016.0019.0026.0031.0036.0044.0049.0054
    21.25 x D1460540620fz.0009.0016.0019.0026.0031.0036.0044.0049.0054
    31.25 x D1390450520fz.0007.0013.0016.0022.0026.0030.0038.0044.0049
    41.25 x D1300400490fz.0007.0012.0014.0019.0023.0027.0033.0038.0042
    51.25 x D1200260330fz.0006.0011.0013.0017.0021.0024.0030.0035.0039
    61.25 x D1160200250fz.0005.0009.0011.0015.0017.0020.0025.0028.0031
    M11.25 x D1300340380fz.0007.0013.0016.0022.0026.0030.0038.0044.0049
    21.25 x D1200230260fz.0006.0011.0013.0017.0021.0024.0030.0035.0039
    31.0 x D1200210230fz.0005.0009.0011.0015.0017.0020.0025.0028.0031
    K11.0 x D1390440490fz.0009.0016.0019.0026.0031.0036.0044.0049.0054
    21.0 x D1360410460fz.0007.0013.0016.0022.0026.0030.0038.0044.0049
    31.0 x D1360390430fz.0006.0011.0013.0017.0021.0024.0030.0035.0039
    S10.75 x D1160230300fz.0007.0013.0016.0022.0026.0030.0038.0044.0049
    20.75 x D1160210260fz.0006.0011.0013.0017.0021.0024.0030.0035.0039
    30.5 x D180100130fz.0004.0007.0008.0011.0014.0016.0020.0023.0027
    41.25 x D1160180200fz.0005.0009.0011.0016.0019.0022.0028.0032.0036
    H11.0 x D1260360460fz.0007.0012.0014.0019.0023.0027.0033.0038.0042
    21.0 x D1230310390fz.0005.0009.0011.0015.0017.0020.0025.0028.0031
    Helical Interpolation/Ramping 30° 45°
    product data image 37436product data image 37438Avanço por faca recomendado (fz = mm/faca) para fresamento em 3D/perfilamento (A)
    WS15PEdiâmetro
    Velocidade de corte Vc SFMpol1/83/161/45/163/81/25/83/41
    Grupo de materialMax DepthminStartmaxmin-max.144 - .238.216 - .356.288 - .475.359 - .594.431 - .713.575 - 950.719 - 1.188.863 - 1.4251.150 - 1.900
    P01.25 x D1420450495fz.0005.0010.0011.0016.0019.0022.0026.0029.0032
    11.25 x D1420450495fz.0005.0010.0011.0016.0019.0022.0026.0029.0032
    21.25 x D1420450495fz.0005.0010.0011.0016.0019.0022.0026.0029.0032
    31.25 x D1315345360fz.0004.0008.0010.0013.0016.0018.0023.0026.0029
    41.25 x D1270300330fz.0004.0007.0008.0011.0014.0016.0020.0023.0025
    51.25 x D1210225240fz.0004.0007.0008.0010.0013.0014.0018.0021.0023
    61.25 x D1165180195fz.0003.0005.0007.0009.0010.0012.0015.0017.0019
    M11.25 x D1225255270fz.0004.0008.0010.0013.0016.0018.0023.0026.0029
    21.25 x D1150165180fz.0004.0007.0008.0010.0013.0014.0018.0021.0023
    31.0 x D1135150165fz.0003.0005.0007.0009.0010.0012.0015.0017.0019
    K11.0 x D1330360390fz.0005.0010.0011.0016.0019.0022.0026.0029.0032
    21.0 x D1300330360fz.0004.0008.0010.0013.0016.0018.0023.0026.0029
    31.0 x D1270300330fz.0004.0007.0008.0010.0013.0014.0018.0021.0023
    S10.75 x D1240255270fz.0004.0008.0010.0013.0016.0018.0023.0026.0029
    20.75 x D1165180195fz.0004.0007.0008.0010.0013.0014.0018.0021.0023
    30.5 x D1607584fz.0002.0004.0005.0007.0008.0010.0012.0014.0016
    41.25 x D1105120135fz.0003.0005.0007.0010.0011.0013.0017.0019.0022
    H11.0 x D1225240255fz.0004.0007.0008.0011.0014.0016.0020.0023.0025
    21.0 x D1195210225fz.0003.0005.0007.0009.0010.0012.0015.0017.0019
    Helical Interpolation/Ramping 15° 30°
    product data image 37436product data image 37438Avanço por faca recomendado (fz = mm/faca) para fresamento em 3D/perfilamento (A)
    WS15PEdiâmetro
    Velocidade de corte Vc SFMpol1/83/161/45/163/81/25/83/41
    Grupo de materialMax DepthminStartmaxmin-max.144 - .238.216 - .356.288 - .475.359 - .594.431 - .713.575 - 950.719 - 1.188.863 - 1.4251.150 - 1.900
    P01.25 x D1490530580fz.0007.0012.0014.0020.0023.0027.0033.0037.0041
    11.25 x D1490530580fz.0007.0012.0014.0020.0023.0027.0033.0037.0041
    21.25 x D1460500540fz.0007.0012.0014.0020.0023.0027.0033.0037.0041
    31.25 x D1390420450fz.0005.0010.0012.0017.0020.0023.0029.0033.0037
    41.25 x D1300350400fz.0005.0009.0011.0014.0017.0020.0025.0029.0032
    51.25 x D1200235260fz.0005.0008.0010.0013.0016.0018.0023.0026.0029
    61.25 x D1160180200fz.0004.0007.0008.0011.0013.0015.0019.0021.0023
    M11.25 x D1300320340fz.0005.0010.0012.0017.0020.0023.0029.0033.0037
    21.25 x D1200215230fz.0005.0008.0010.0013.0016.0018.0023.0026.0029
    31.0 x D1200105210fz.0004.0007.0008.0011.0013.0015.0019.0021.0023
    K11.0 x D1390415440fz.0007.0012.0014.0020.0023.0027.0033.0037.0041
    21.0 x D1360380410fz.0005.0010.0012.0017.0020.0023.0029.0033.0037
    31.0 x D1360375390fz.0005.0008.0010.0013.0016.0018.0023.0026.0029
    S10.75 x D1160190230fz.0005.0010.0012.0017.0020.0023.0029.0033.0037
    20.75 x D1160180210fz.0005.0008.0010.0013.0016.0018.0023.0026.0029
    30.5 x D18090100fz.0003.0005.0006.0008.0011.0012.0015.0017.002
    41.25 x D1160170180fz.0004.0007.0008.0012.0014.0017.0021.0024.0027
    H11.0 x D1260310360fz.0005.0009.0011.0014.0017.0020.0025.0029.0032
    21.0 x D1230270310fz.0004.0007.0008.0011.0013.0015.0019.0021.0023
    Mergulho
    product data image 37437product data image 37428WS15PEAvanço recomendado por rotação
    Velocidade de corte Vc SFMD1 Diâmetro
    Grupo de materialMax DepthApplicableCoolantminStartmaxpol 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1
    P01,25 x D1Preferred420450495IPR.00130.0018.0022.0026.0031.0037.0047.0063.0071
    11,25 x D1Required420450495IPR.00130.0018.0022.0026.0031.0037.0047.0063.0071
    21,25 x D1Required420450495IPR.00130.0018.0022.0026.0031.0037.0047.0063.0071
    31,25 x D1Required315345360IPR.00080.0013.0016.0020.0024.0028.0039.0049.0059
    41,25 x D1Required270300330IPR.00080.0013.0016.0020.0024.0028.0039.0049.0059
    51,25 x D1Required210225240IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    61,25 x D1Required165180195IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    M11,25 x D1Required225255270IPR.00080.0013.0016.0020.0024.0028.00239.0049.0059
    21,25 x D1Required150165180IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    31,0 x D1Required135150165IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    K11,0 x D1Preferred330360390IPR.00130.0018.0022.0026.0031.0037.0047.0063.0071
    21,0 x D1Required300330360IPR.00080.0013.0016.0020.0024.0028.0039.0049.0059
    31,0 x D1Required270300330IPR.00080.0013.0016.0020.0024.0028.0039.0049.0059
    S10,75 x D1Required240255270IPR.00080.0013.0016.0020.0024.0028.0039.0049.0059
    20,75 x D1Required165180195IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    30,5 x D1Required607584IPR.00040.0006.0007.0009.0011.0013.0018.0024.0028
    41,25 x D1Required105120135IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    H11,0 x D1Required225240255IPR.00080.0013.0016.0020.0024.0028.0039.0049.0059
    21,0 x D1Required195210225IPR.00060.0008.0010.0014.0016.0020.0026.0033.0039
    Grupo de materialproduct data image 38166product data image 38157product data image 100776389
    Fresamento lateral (A) e canal (B)WS15PEAvanço por faca recomendado (fz = mm/faca) para fresamento lateral (A). Para abertura de canal (B), reduzir fz em 20%.
    ABVelocidade de corte vc m/minD1 Diâmetro
    apaeapMín.InícioMáx.mm3,04,05,06,08,010,012,014,016,018,020,025,0
    P01,5 x D10,5 x D11,25 x D1150175200fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    11,5 x D10,5 x D11,25 x D1150175200fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    21,5 x D10,5 x D11,25 x D1140165190fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    31,5 x D10,5 x D11,25 x D1120140160fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    41,5 x D10,5 x D11,25 x D190120150fz0,0180,0240,0300,0360,0490,0590,0690,0770,0840,0910,0970,107
    51,5 x D10,5 x D11,25 x D16080100fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    61,5 x D10,5 x D11,25 x D1506575fz0,0130,0180,0220,0270,0370,0440,0510,0570,0630,0670,0710,078
    M11,5 x D10,5 x D11,25 x D190100115fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    21,5 x D10,5 x D11,25 x D1607080fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    31,5 x D10,5 x D11,0 x D1606570fz0,0130,0180,0220,0270,0370,0440,0510,0570,0630,0670,0710,078
    K11,5 x D10,5 x D11,0 x D1120135150fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    21,5 x D10,5 x D11,0 x D1110125140fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    31,5 x D10,5 x D11,0 x D1110120130fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    S11,5 x D10,5 x D10,75 x D1507090fz0,0170,0230,0300,0360,0500,0610,0700,0790,0870,0950,1010,114
    21,5 x D10,5 x D10,75 x D1506580fz0,0090,0130,0160,0190,0260,0320,0370,0420,0460,0500,0540,061
    31,5 x D10,5 x D10,5 x D1253040fz0,0090,0130,0160,0190,0260,0320,0370,0420,0460,0500,0540,061
    41,5 x D10,5 x D11,25 x D1505560fz0,0110,0160,0210,0260,0370,0450,0520,0580,0640,0690,0740,084
    H11,5 x D10,5 x D11,0 x D180110140fz0,0180,0240,0300,0360,0490,0590,0690,0770,0840,0910,0970,107
    21,5 x D10,5 x D11,0 x D17090120fz0,0130,0180,0220,0270,0370,0440,0510,0570,0630,0670,0710,078
    NOTA: Consulte a página B92 para obter mais informações sobre os fatores de ajuste VARIMILL™ XTREME™ para cálculos de avanço.
    Helical Interpolation/Ramping 15° 30°
    product data image 37436product data image 37438Avanço recomendado por faca (fz=mm/z) para interpolação helicoidal e rampa zef = 2
    WS15PEdiâmetro
    Velocidade de corte vc m/minmm3,04,05,06,08,010,012,014,016,018,020,025,0
    Grupo de materialMax DepthminStartmaxmin-max3,5-5,74,6-7,65,8-9,56,9-11,49,2-15,211,5-19,013,8-22,816,1-26,618,4-30,420,7-34,223,0-38,028,8-47,5
    P01.25 x D1150165175fz0,0170,0230,0300,0360,0500,0590,0680,0760,0830,0890,0940,102
    11.25 x D1150165175fz0,0170,0230,0300,0360,0500,0590,0680,0760,0830,0890,0940,102
    21.25 x D1140155165fz0,0170,0230,0300,0360,0500,0590,0680,0760,0830,0890,0940,102
    31.25 x D1120130140fz0,0140,0190,0250,0300,0410,0500,0580,0650,0720,0780,0830,094
    41.25 x D190105120fz0,0130,0180,0220,0270,0370,0450,0510,0580,0630,0680,0730,080
    51.25 x D1607080fz0,0120,0160,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    61.25 x D1505565fz0,0100,0130,0170,0200,0280,0330,0380,0430,0470,0500,0530,059
    M11.25 x D19095100fz0,0140,0190,0250,0300,0410,0500,0580,0650,0720,0780,0830,094
    21.25 x D1606570fz0,0120,0160,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    31.0 x D1606265fz0,0100,0130,0170,0200,0280,0330,0380,0430,0470,0500,0530,059
    K11.0 x D1120130135fz0,0170,0230,0300,0360,0500,0590,0680,0760,0830,0890,0940,102
    21.0 x D1110120125fz0,0140,0190,0250,0300,0410,0500,0580,0650,0720,0780,0830,094
    31.0 x D1110115120fz0,0120,0160,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    S10.75 x D1506070fz0,0140,0190,0250,0300,0410,0500,0580,0650,0720,0780,0830,094
    20.75 x D1505565fz0,0120,0160,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    30.5 x D1252730fz0,0080,0100,0130,0160,0220,0260,0310,0350,0380,0420,0450,051
    41.25 x D1505255fz0,0090,0130,0170,0210,0300,0370,0430,0480,0530,0570,0610,069
    H11.0 x D18095110fz0,0130,0180,0220,0270,0370,0450,0510,0580,0630,0680,0730,080
    21.0 x D1708090fz0,0100,0130,0170,0200,0280,0330,0380,0430,0470,0500,0530,059
    Helical Interpolation/Ramping 0° 15°
    product data image 37436product data image 37438Avanço recomendado por faca (fz=mm/z) para interpolação helicoidal e rampa zef = 2
    WS15PEdiâmetro
    Velocidade de corte vc m/minmm3,04,05,06,08,010,012,014,016,018,020,025,0
    Grupo de materialMax DepthminStartmaxmin-max3,5-5,74,6-7,65,8-9,56,9-11,49,2-15,211,5-19,013,8-22,816,1-26,618,4-30,420,7-34,223,0-38,028,8-47,5
    P01,25 x D1150175200fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    11,25 x D1150175200fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    21,25 x D1140165190fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    31,25 x D1120140160fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    41,25 x D190120150fz0,0180,0240,0300,0360,0490,0590,0690,0770,0840,0910,0970,107
    51,25 x D16080100fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    61,25 x D1506575fz0,0130,0180,0220,0270,0370,0440,0510,0570,0630,0670,0710,078
    M11,25 x D190100115fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    21,25 x D1607080fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    31,0 x D1606570fz0,0130,0180,0220,0270,0370,0440,0510,0570,0630,0670,0710,078
    K11,0 x D1120135150fz0,0230,0310,0400,0480,0660,0790,0910,1020,1110,1190,1250,136
    21,0 x D1110125140fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    31,0 x D1110120130fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    S10,75 x D1507090fz0,0190,0260,0330,0400,0550,0670,0770,0870,0960,1040,1110,125
    20,75 x D1506580fz0,0160,0210,0270,0320,0440,0530,0620,0700,0770,0830,0890,100
    30,5 x D1253040fz0,0100,0140,0180,0210,0290,0350,0410,0460,0510,0550,0590,067
    41,25 x D1505560fz0,0130,0170,0230,0280,0400,0490,0570,0640,0710,0760,0820,092
    H11,0 x D180110140fz0,0180,0240,0300,0360,0490,0590,0690,0770,0840,0910,0970,107
    21,0 x D17090120fz0,0130,0180,0220,0270,0370,0440,0510,0570,0630,0670,0710,078
    Helical Interpolation/Ramping 30° 45°
    product data image 37436product data image 37438Avanço recomendado por faca (fz=mm/z) para interpolação helicoidal e rampa zef = 2
    WS15PEdiâmetro
    Velocidade de corte vc m/minmm3,04,05,06,08,010,012,014,016,018,020,025,0
    Grupo de materialMax DepthminStartmaxmin-max3,5-5,74,6-7,65,8-9,56,9-11,49,2-15,211,5-19,013,8-22,816,1-26,618,4-30,420,7-34,223,0-38,028,8-47,5
    P01.25 x D1140150165fz0,0140,0190,0240,0290,0400,0480,0550,0610,0670,0710,0750,082
    11.25 x D1140150165fz0,0140,0190,0240,0290,0400,0480,0550,0610,0670,0710,0750,082
    21.25 x D1140150165fz0,0140,0190,0240,0290,0400,0480,0550,0610,0670,0710,0750,082
    31.25 x D1105115120fz0,0110,0150,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    41.25 x D190100110fz0,0110,0140,0180,0220,0300,0360,0410,0460,0510,0550,0580,064
    51.25 x D1707580fz0,0090,0130,0160,0190,0260,0320,0370,0420,0460,0500,0530,060
    61.25 x D1556065fz0,0080,0110,0130,0160,0220,0270,0310,0340,0380,0400,0430,047
    M11.25 x D1758590fz0,0110,0150,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    21.25 x D1505560fz0,0090,0130,0160,0190,0260,0320,0370,0420,0460,0500,0530,060
    31.0 x D1455055fz0,0080,0110,0130,0160,0220,0270,0310,0340,0380,0400,0430,047
    K11.0 x D1110120130fz0,0140,0190,0240,0290,0400,0480,0550,0610,0670,0710,0750,082
    21.0 x D1100110120fz0,0110,0150,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    31.0 x D190100110fz0,0090,0130,0160,0190,0260,0320,0370,0420,0460,0500,0530,060
    S10.75 x D1808590fz0,0110,0150,0200,0240,0330,0400,0460,0520,0580,0620,0670,075
    20.75 x D1556065fz0,0090,0130,0160,0190,0260,0320,0370,0420,0460,0500,0530,060
    30.5 x D1202528fz0,0060,0080,0110,0130,0170,0210,0250,0280,0310,0330,0360,040
    41.25 x D1354045fz0,0080,0100,0140,0170,0240,0290,0340,0380,0420,0460,0490,055
    H11.0 x D1758085fz0,0110,0140,0180,0220,0300,0360,0410,0460,0510,0550,0580,064
    21.0 x D1657075fz0,0080,0110,0130,0160,0220,0270,0310,0340,0380,0400,0430,047
    Mergulho
    product data image 37437product data image 37428WS15PEAvanço recomendado por rotação
    Velocidade de corte vc m/minD1 Diâmetro
    Grupo de materialMax DepthApplicableCoolantminStartmaxmm3,04,05,06,08,010,012,014,016,018,020,025,0
    P01,25 x D1Preferred140150165fn0,0330,0400,0450,0550,0650,0800,0950,1100,1200,1400,1600,180
    11,25 x D1Required140150165fn0,0330,0400,0450,0550,0650,0800,0950,1100,1200,1400,1600,180
    21,25 x D1Required140150165fn0,0330,0400,0450,0550,0650,0800,0950,1100,1200,1400,1600,180
    31,25 x D1Required105115120fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    41,25 x D1Required90100110fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    51,25 x D1Required707580fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    61,25 x D1Required556065fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    M11,25 x D1Required758590fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    21,25 x D1Required505560fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    31,0 x D1Required455055fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    K11,0 x D1Preferred110120130fn0,0330,0400,0450,0550,0650,0800,0950,1100,1200,1400,1600,180
    21,0 x D1Required100110120fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    31,0 x D1Required90100110fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    S10,75 x D1Required808590fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    20,75 x D1Required556065fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    30,5 x D1Required202528fn0,0100,0120,0150,0180,0220,0280,0330,0400,0450,0500,0600,070
    41,25 x D1Required354045fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    H11,0 x D1Required758085fn0,0200,0280,0330,0400,0500,0600,0700,0850,1000,1100,1250,150
    21,0 x D1Required657075fn0,0140,0180,0200,0250,0350,0400,0500,0550,0650,0750,0850,100
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk