Search results for
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (142)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(97)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(142)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(142)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(142)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(142)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(142)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(142)
- M Stainless Steel (142)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(142)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(142)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(142)
- K Cast Iron (142)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(142)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(142)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(142)
- N Non-Ferrous Materials (42)
- N1Wrought Aluminum (42)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
- N3High-Silicon Aluminum Alloys Si >12.2%(42)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
- N6Carbon, Graphite Composites, CFRP (42)
- S High-Temp Alloys (142)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(142)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(142)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(120)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(120)
Applications
Applications
Blind & Cross Hole Finishing (57)
Blind Hole Finishing (57)
Through & Cross Hole Finishing (85)
Through Hole Finishing (85)
Cutting Diameter
Cutting Diameter
- 0.055 in(1)
- 0.06 in(1)
- 0.063 in(1)
- 0.079 in(5)
- 0.088 in(1)
- 0.098 in(1)
- 0.11 in(1)
- 0.119 in(5)
- 0.126 in(1)
- 0.138 in(1)
- 0.157 in(5)
- 0.177 in(1)
- 0.197 in(6)
- 0.237 in(7)
- 0.276 in(1)
- 0.315 in(7)
- 0.335 in(1)
- 0.354 in(1)
- 0.374 in(1)
- 0.394 in(6)
- 0.473 in(5)
- 0.551 in(7)
- 0.591 in(3)
- 0.63 in(2)
- 0.669 in(4)
- 0.709 in(4)
- 0.748 in(2)
- 0.787 in(4)
- 0.828 in(4)
- 0.866 in(4)
- 0.906 in(3)
- 0.946 in(3)
- 0.984 in(4)
- 1.024 in(2)
- 1.063 in(4)
- 1.102 in(2)
- 1.143 in(2)
- 1.181 in(3)
- 1.22 in(3)
- 1.26 in(3)
- 1.299 in(2)
- 1.339 in(1)
- 1.379 in(3)
- 1.417 in(2)
- 1.457 in(1)
- 1.496 in(3)
- 1.536 in(1)
- 1.575 in(4)
- 1.614 in(2)
- 1.655 in(1)
to
Cutting Diameter
Cutting Diameter
- 1.401 mm(1)
- 1.5 mm(1)
- 1.6 mm(1)
- 2.0 mm(5)
- 2.2 mm(1)
- 2.5 mm(1)
- 2.801 mm(1)
- 3.0 mm(5)
- 3.2 mm(1)
- 3.5 mm(1)
- 4.0 mm(5)
- 4.5 mm(1)
- 5.0 mm(6)
- 6.0 mm(7)
- 7.0 mm(1)
- 8.0 mm(7)
- 8.5 mm(1)
- 9.0 mm(1)
- 9.5 mm(1)
- 10.0 mm(6)
- 12.0 mm(5)
- 14.0 mm(7)
- 15.0 mm(3)
- 16.0 mm(2)
- 17.0 mm(4)
- 18.0 mm(4)
- 19.0 mm(2)
- 20.0 mm(4)
- 21.0 mm(4)
- 22.0 mm(4)
- 23.0 mm(3)
- 24.0 mm(3)
- 25.0 mm(4)
- 26.0 mm(2)
- 27.0 mm(4)
- 28.0 mm(2)
- 29.0 mm(2)
- 30.0 mm(3)
- 31.0 mm(3)
- 32.0 mm(3)
- 33.0 mm(2)
- 34.0 mm(1)
- 35.0 mm(3)
- 36.0 mm(2)
- 37.0 mm(1)
- 38.0 mm(3)
- 39.0 mm(1)
- 40.0 mm(4)
- 41.0 mm(2)
- 42.0 mm(1)
to
Connection Style
Connection Style
- Short Taper Reamer Shank (45)
- Straight-Cylindrical (97)
Number of Flutes
Number of Flutes
- 3 (3)
- 4 (27)
- 6 (69)
- 8 (43)
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K10 (20)
- K10F (22)
- K10F-DCFD (22)
- WU05PR (78)
Hand Of Tool
Hand Of Tool
- R (142)
Helix Hand
Helix Hand
- L (85)
- N (57)
Lead in Length
Lead in Length
- 0.2 mm(2)
- 0.301 mm(6)
- 0.4 mm(8)
- 0.5 mm(43)
- 0.601 mm(4)
- 0.701 mm(7)
- 0.9 mm(7)
- 1.1 mm(45)
to
Lead In Length
Lead In Length
- 0.0 in(8)
- 0.001 in(69)
- 0.002 in(45)
to
Front-End
Gage Length
Gage Length
- 4.469 in(1)
- 4.843 in(2)
- 5.138 in(1)
- 5.748 in(2)
- 6.005 in(1)
- 6.24 in(1)
- 6.851 in(1)
- 7.303 in(1)
- 7.48 in(1)
- 8.563 in(1)
- 9.803 in(1)
- 10.787 in(1)
Gage Length
Gage Length
- 123 mm(2)
- 146 mm(2)
- 174 mm(1)
- 190 mm(1)
- 249 mm(1)
- 274 mm(1)
- 113.5 mm(1)
- 130.5 mm(1)
- 152.5 mm(1)
- 158.5 mm(1)
- 185.5 mm(1)
- 217.5 mm(1)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (97)
- SHORT TAPER (45)
Back-End Diameter
Back-End Diameter
- 1.401 mm(1)
- 1.5 mm(1)
- 1.6 mm(1)
- 2.0 mm(1)
- 2.2 mm(1)
- 2.5 mm(1)
- 2.801 mm(1)
- 3.0 mm(9)
- 3.2 mm(1)
- 3.5 mm(1)
- 4.0 mm(5)
- 4.5 mm(1)
- 5.0 mm(1)
- 5.601 mm(1)
- 6.0 mm(11)
- 7.101 mm(1)
- 8.0 mm(8)
- 9.0 mm(2)
- 10.0 mm(6)
- 11.5 mm(3)
- 12.0 mm(5)
- 13.5 mm(2)
- 14.0 mm(5)
- 15.5 mm(3)
- 16.0 mm(4)
- 17.5 mm(6)
- 20.0 mm(30)
- 25.0 mm(20)
- 30.0 mm(8)
- 32.0 mm(8)
- 35.0 mm(8)
to
Back-End Diameter
Back-End Diameter
- 0.055 in(1)
- 0.06 in(1)
- 0.063 in(1)
- 0.079 in(1)
- 0.088 in(1)
- 0.098 in(1)
- 0.11 in(1)
- 0.119 in(9)
- 0.126 in(1)
- 0.138 in(1)
- 0.157 in(5)
- 0.177 in(1)
- 0.197 in(1)
- 0.221 in(1)
- 0.237 in(11)
- 0.28 in(1)
- 0.315 in(8)
- 0.354 in(2)
- 0.394 in(6)
- 0.453 in(3)
- 0.473 in(5)
- 0.531 in(2)
- 0.551 in(5)
- 0.61 in(3)
- 0.63 in(4)
- 0.69 in(6)
- 0.787 in(30)
- 0.984 in(20)
- 1.181 in(8)
- 1.26 in(8)
- 1.379 in(8)
to
No filters matching ""
Machine Tool Services
WIDIA partners with machine tool builders to provide engineering solutions, optimized process proposal, project run-off, and more. Let's work together!
Resources & Knowledge
Explore WIDIA’s technical information, educational resources & tools to learn more & gain expert knowledge to help you choose the right tools for the job.
News
Stay up-to-date with the latest WIDIA news articles, press releases, and company announcements. Read now.
WIDIA E-Business Solutions
Discover WIDIA's e-business services, offering a seamless online experience for purchasing cutting tools, accessing technical resources, and more.
Promotions
Incredible tooling at a price you don't want to miss. Explore current offers, and purchase WIDIA metal cutting tools on sale now.
Contact a WIDIA Expert
Do you have questions or need expert advice? Our team is ready to help with pricing, availability, product selection, technical specifications, and more!
Carbide Confirmation - WIDIA Carbide Recylcing Service
Thank you for submitting your recycled carbide to WIDIA. Please see your confirmation number and include this confirmation in each box you send to us.
Terms and Conditions - WIDIA Carbide Recylcing Service
Review the Terms and Conditions of Purchase for WIDIA's Carbide Recylcing Program. Read now.
Secure Shipping Containers
Fill out our form to order shipping containers for your scrap carbide. Start recyling carbide with WIDIA now!
Check Your Order Status - WIDIA Carbide Recylcing Service
Already submitted your recycled carbide to WIDIA? Check your order status now.
Carbide Recycling Services
WIDIA's carbide recycling service helps you responsibly dispose of and recycle your used carbide tools, reducing waste and promoting sustainability. Learn more.
0°/90° Shoulder Mills
The WIDIA portfolio of 90° shoulder mills are perfect for cutting two faces at the same time on a workpiece. Learn more about WIDIA 90° shoulder mills.
How to Configure Custom Products
WIDIA's custom product configurator will allow you to make changes to our standard products to fit your needs. Learn more.
- Tutorial
Tutorials
Need some help? Our step-by-step guides are here to simplify your tasks and help you navigate WIDIA.com with ease.
How to Quick Order / Bulk Order
Quickly add items to your shopping cart with WIDIA's Quick Order feature. Learn more.
- My Account
Collaboration Space
Experience a new level of manufacturing with WIDIA's collaborative environment that seamlessly integrates all your machining needs in one place. Learn more.