ISO and Additional Inserts

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (34)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(32)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(32)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(24)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(17)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(29)
    • M Stainless Steel (37)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(36)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(36)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(34)
    • K Cast Iron (39)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(37)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(34)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(34)
    • N Non-Ferrous Materials (24)
      • N1
        Wrought Aluminum (22)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(23)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (7)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
      • N6
        Carbon, Graphite Composites, CFRP (7)
      • N7
        MMC's (7)
    • S High-Temp Alloys (36)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(29)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(34)
    • H Hardened Materials (15)
      • H1
        Hardened Materials 44-48 HRC(15)
    Select All Star
    • DE (39)
    • IN (68)
    • US (3)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (7)
    • 2.0 (12)
    • 3.0 (33)
    • 4.0 (53)
    • 6.0 (1)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.0 in(77)
    • 0.03 in(3)
    • 0.031 in(9)
    • 0.043 in(1)
    • 0.059 in(2)
    • 0.063 in(5)
    • 0.075 in(1)
    • 0.125 in(2)
    • 0.197 in(2)
    • 0.236 in(2)
    • 0.315 in(1)
    • 1.969 in(1)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(77)
    • 0.75 mm(3)
    • 0.8 mm(9)
    • 1.1 mm(1)
    • 1.5 mm(2)
    • 1.6 mm(5)
    • 1.9 mm(1)
    • 3.175 mm(2)
    • 5.0 mm(2)
    • 6.0 mm(2)
    • 8.0 mm(1)
    • 50.0 mm(1)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(50)
    • 0.69 mm(3)
    • 0.7 mm(1)
    • 0.71 mm(2)
    • 0.74 mm(4)
    • 1.0 mm(2)
    • 1.02 mm(3)
    • 1.029 mm(2)
    • 1.04 mm(1)
    • 1.17 mm(3)
    • 1.2 mm(1)
    • 1.21 mm(3)
    • 1.24 mm(3)
    • 1.39 mm(8)
    • 1.443 mm(4)
    • 1.483 mm(5)
    • 1.484 mm(4)
    • 1.511 mm(3)
    • 1.512 mm(3)
    • 2.58 mm(1)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(50)
    • 0.027 in(3)
    • 0.0276 in(1)
    • 0.028 in(2)
    • 0.0292 in(4)
    • 0.039 in(2)
    • 0.04 in(3)
    • 0.0405 in(2)
    • 0.0409 in(1)
    • 0.0462 in(3)
    • 0.0471 in(1)
    • 0.0476 in(3)
    • 0.0487 in(3)
    • 0.0546 in(8)
    • 0.0568 in(4)
    • 0.0584 in(9)
    • 0.0595 in(6)
    • 0.1017 in(1)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (20)
    • THM-F (2)
    • THR (1)
    • TN6525 (3)
    • TN6540 (8)
    • TTI25 (4)
    • TTM08 (7)
    • TTM09 (1)
    • WK15CM (9)
    • WP35CM (23)
    • WU20PM (28)
    Wiper Insert
    Wiper Insert
    • N (101)
    • Y (5)
    Front-End
    Insert Shape
    Insert Shape
    • A-PARALLELOGRAM 90 (12)
    • L-RECTANGLE 90 (3)
    • R-ROUND (5)
    • S-SQUARE 90 (52)
    • T-TRIANGLE 60 (34)
    Insert Geometry
    Shape
    Shape
    • A-PARALLELOGRAM 90 (12)
    • L-RECTANGLE 90 (3)
    • R-ROUND (5)
    • S-SQUARE 90 (52)
    • T-TRIANGLE 60 (34)
    Insert IC Size
    Insert IC Size
    • 6.35 mm(3)
    • 9.52 mm(6)
    • 9.525 mm(8)
    • 10.0 mm(2)
    • 12.0 mm(2)
    • 12.7 mm(57)
    • 13.0 mm(1)
    • 13.41 mm(2)
    • 15.875 mm(9)
    • 16.0 mm(1)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(3)
    • 0.375 in(14)
    • 0.3937 in(2)
    • 0.472 in(1)
    • 0.4724 in(1)
    • 0.5 in(57)
    • 0.5118 in(1)
    • 0.528 in(2)
    • 0.625 in(9)
    • 0.6299 in(1)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 10.962 mm(2)
    • 11.0 mm(1)
    • 11.102 mm(2)
    • 11.2 mm(1)
    • 12.7 mm(39)
    • 13.41 mm(2)
    • 15.0 mm(2)
    • 15.875 mm(8)
    • 15.88 mm(1)
    • 16.453 mm(8)
    • 16.498 mm(5)
    • 16.5 mm(1)
    • 16.866 mm(2)
    • 17.0 mm(1)
    • 17.196 mm(3)
    • 17.22 mm(1)
    • 17.24 mm(1)
    • 21.948 mm(2)
    • 21.949 mm(6)
    • 21.961 mm(7)
    • 21.997 mm(1)
    • 22.489 mm(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.4316 in(2)
    • 0.4331 in(1)
    • 0.437 in(1)
    • 0.4371 in(1)
    • 0.441 in(1)
    • 0.5 in(39)
    • 0.528 in(2)
    • 0.5906 in(2)
    • 0.625 in(9)
    • 0.6477 in(2)
    • 0.6478 in(6)
    • 0.6495 in(5)
    • 0.65 in(1)
    • 0.664 in(2)
    • 0.6689 in(1)
    • 0.677 in(3)
    • 0.678 in(1)
    • 0.679 in(1)
    • 0.8641 in(8)
    • 0.8646 in(7)
    • 0.866 in(1)
    • 0.8854 in(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • CA (1)
    • M0 (2)
    • M0T (1)
    • MM (12)
    • MS (14)
    Cutting Tool Material
    Cutting Tool Material
    • H T (4)
    • H W (101)
    Tolerance Class
    Tolerance Class
    • A (25)
    • C (5)
    • H (1)
    • K (56)
    • M (7)
    • P (12)
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)