ProGroove™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- N7MMC's (3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (2)
- H1Hardened Materials 44-48 HRC(2)
- H2Hardened Materials 48-55 HRC(2)
- H3Hardened Materials 56-60 HRC(2)
- H4Hardened Materials >60 HRC(2)
Applications
Applications
Cut-Off (1)
Deep Grooving (2)
Grooving (4)
Turning (1)
Cutting Condition
Cutting Condition
- Lightly Interrupted Cut (2)
- Smooth Cut (3)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (4)
to
Connection Style
Connection Style
- Toolholder (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (5)
- 3.0 (3)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 3.386 in(1)
- 3.938 in(1)
- 4.331 in(3)
- 4.921 in(1)
- 5.906 in(3)
to
Over All Length [L]
Over All Length [L]
- 86.0 mm(1)
- 100.0 mm(1)
- 110.0 mm(3)
- 125.0 mm(1)
- 150.0 mm(3)
to
Corner Radius
Corner Radius
- 0.008 in(1)
- 0.01 in(1)
- 0.012 in(2)
- 0.016 in(2)
- 0.031 in(3)
- 0.047 in(3)
- 0.063 in(1)
- 0.079 in(1)
to
Corner Radius
Corner Radius
- 0.2 mm(1)
- 0.25 mm(1)
- 0.301 mm(2)
- 0.4 mm(2)
- 0.8 mm(3)
- 1.201 mm(3)
- 1.6 mm(1)
- 2.0 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (2)
- CW2015 (2)
- CW5025 (2)
- HK1500 (2)
- HK15M (2)
- PB100 (2)
- PB250 (2)
- RC3503 (2)
- SP0A00 (2)
- SPTM00 (2)
- THM (4)
- THM X (1)
- THM-F (2)
- THM-X (2)
- THMF-X (2)
- TN200 (1)
- TN2000 (2)
- TN35 (3)
- TN4000 (2)
- TN5015 (3)
- TN5120 (3)
- TN6030 (2)
- TN7010 (3)
- TN7015 (3)
- TN7025 (3)
- TN7035 (3)
- TN7110 (3)
- TN7115 (3)
- TN7125 (3)
- TN7135 (1)
- TN7525 (1)
- TN7535 (1)
- TN8025 (1)
- TPC25 (1)
- TPC35 (1)
- TTI15 (2)
- TTM08 (3)
- TTM09 (1)
- TTMS (2)
- TTR (3)
- TTR-X (3)
- TTS (3)
- TTX (3)
- WBH25U (2)
- WDN25U (3)
- WK20CT (3)
- WM35CT (1)
- WP15CT (3)
- WP25CT (3)
- WP35CT (3)
Hand Of Tool
Hand Of Tool
- N (4)
Wiper Insert
Wiper Insert
- N (5)
F Dimension
F Dimension
- 0.0 mm(3)
- 3.6 mm(1)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.143 in(1)
to
Cutting Direction
Cutting Direction
- E (4)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (1)
- POSITIVE-ZERO (3)
Front-End
Clamp Style
Clamp Style
- C (3)
- Y (1)
Cutting Width
Cutting Width
- 0.157 in(1)
- 0.161 in(2)
- 0.167 in(1)
- 0.168 in(1)
to
Cutting Width
Cutting Width
- 4.0 mm(1)
- 4.101 mm(2)
- 4.25 mm(1)
- 4.275 mm(1)
to
Insert Shape
Insert Shape
- PRISMATIC (2)
- T-TRIANGLE 60 (3)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.575 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 40.0 mm(1)
to
Insert Geometry
Shape
Shape
- PRISMATIC (1)
Insert Seat Size
Insert Seat Size
- 4 (1)
Cutting Tool Material
Cutting Tool Material
- B H (2)
- C A (2)
- C N (2)
- D P (3)
- H T (2)
- H W (5)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (3)
Shank Height
Shank Height
- 0.787 in(1)
- 0.984 in(2)
- 1.024 in(1)
to
Shank Height
Shank Height
- 20.0 mm(1)
- 25.0 mm(2)
- 26.0 mm(1)
to
Shank Width
Shank Width
- 0.126 in(1)
- 0.512 in(2)
- 0.709 in(1)
to
Shank Width
Shank Width
- 3.2 mm(1)
- 13.0 mm(2)
- 18.0 mm(1)
to
No filters matching ""
