Laydown Threading
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (180)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(180)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(180)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(180)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(180)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(180)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(180)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(180)
- M Stainless Steel (180)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(180)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(180)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(180)
- K Cast Iron (180)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(180)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(180)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(180)
- N Non-Ferrous Materials (178)
- N1Wrought Aluminum (178)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(178)
- N3High-Silicon Aluminum Alloys Si >12.2%(178)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (178)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (178)
- N6Carbon, Graphite Composites, CFRP (178)
- N7MMC's (178)
- S High-Temp Alloys (180)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(180)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(180)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(180)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(180)
Select All Star
- US (7)
Applications
Applications
ID Thread Turning (94)
OD Thread Turning (88)
Profiling (10)
TRN Boring (5)
Type of Thread
Type of Thread
- 55 (67)
- 60 (82)
- ACME (9)
- API (4)
- API BUTTRESS (4)
- API RD (7)
- BSPT (8)
- BSW (53)
- M (103)
- NPT (33)
- NPTF (8)
- RD DIN 405 (38)
- STUB ACME (13)
- TR DIN 103 (53)
- UN (65)
- UNJ (9)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (69)
to
Connection Style
Connection Style
- Boring Bar Shank (27)
- KM (22)
- Toolholder (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 3.0 (183)
to
Over All Length [L]
Over All Length [L]
- 1.5748 in(4)
- 1.575 in(3)
- 1.7717 in(2)
- 1.772 in(1)
- 2.3622 in(2)
- 2.7559 in(2)
- 3.1496 in(1)
- 3.25 in(1)
- 3.5433 in(2)
- 3.937 in(6)
- 4.3307 in(4)
- 4.9213 in(1)
- 5.0 in(1)
- 5.0394 in(1)
- 5.3543 in(1)
- 5.9055 in(1)
- 6.0 in(8)
- 6.0236 in(1)
- 6.1024 in(1)
- 6.811 in(1)
- 6.8898 in(1)
- 6.9291 in(1)
- 7.0 in(4)
- 7.0866 in(7)
- 7.874 in(3)
- 9.8425 in(6)
- 10.0 in(3)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(7)
- 45.0 mm(3)
- 60.0 mm(2)
- 70.0 mm(2)
- 80.0 mm(1)
- 82.55 mm(1)
- 90.0 mm(2)
- 100.0 mm(6)
- 110.0 mm(4)
- 125.0 mm(1)
- 127.0 mm(1)
- 128.0 mm(1)
- 136.0 mm(1)
- 150.0 mm(1)
- 152.4 mm(8)
- 153.0 mm(1)
- 155.0 mm(1)
- 173.0 mm(1)
- 175.0 mm(1)
- 176.0 mm(1)
- 177.8 mm(4)
- 180.0 mm(7)
- 200.0 mm(3)
- 250.0 mm(6)
- 254.0 mm(3)
to
Corner Radius
Corner Radius
- 0.001 in(5)
- 0.002 in(59)
- 0.003 in(35)
- 0.004 in(1)
- 0.006 in(19)
- 0.008 in(31)
- 0.009 in(2)
- 0.01 in(11)
- 0.011 in(13)
- 0.012 in(16)
- 0.017 in(13)
- 0.021 in(7)
- 0.026 in(1)
- 0.028 in(17)
- 0.03 in(13)
- 0.036 in(2)
- 0.038 in(1)
- 0.039 in(1)
- 0.055 in(7)
to
Corner Radius
Corner Radius
- 0.025 mm(5)
- 0.05 mm(59)
- 0.075 mm(35)
- 0.1 mm(1)
- 0.15 mm(19)
- 0.2 mm(31)
- 0.225 mm(2)
- 0.25 mm(11)
- 0.275 mm(13)
- 0.3 mm(16)
- 0.425 mm(13)
- 0.525 mm(7)
- 0.65 mm(1)
- 0.7 mm(17)
- 0.75 mm(13)
- 0.925 mm(2)
- 0.975 mm(1)
- 1.0 mm(1)
- 1.4 mm(7)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(117)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(117)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (10)
- KC5025 (21)
- KC720 (3)
- KC730 (1)
- PN120 (12)
- TN6025 (178)
- TTS (11)
Hand Of Tool
Hand Of Tool
- L (20)
- R (48)
Wiper Insert
Wiper Insert
- N (183)
F Dimension
F Dimension
- 7.0 mm(2)
- 7.112 mm(3)
- 7.3 mm(1)
- 7.4 mm(1)
- 8.636 mm(1)
- 8.9 mm(2)
- 9.0 mm(2)
- 11.0 mm(2)
- 11.5 mm(2)
- 11.684 mm(2)
- 12.7 mm(1)
- 12.954 mm(2)
- 13.0 mm(2)
- 13.4 mm(2)
- 15.6 mm(1)
- 16.0 mm(2)
- 16.1 mm(2)
- 16.3 mm(2)
- 16.51 mm(1)
- 17.0 mm(2)
- 17.2 mm(1)
- 17.4 mm(1)
- 19.05 mm(1)
- 19.6 mm(1)
- 20.0 mm(2)
- 21.5 mm(1)
- 22.0 mm(4)
- 22.4 mm(1)
- 25.0 mm(3)
- 25.4 mm(4)
- 27.0 mm(9)
- 31.75 mm(2)
- 32.0 mm(3)
to
F Dimension
F Dimension
- 0.2756 in(2)
- 0.28 in(3)
- 0.2874 in(1)
- 0.2913 in(1)
- 0.34 in(1)
- 0.3504 in(2)
- 0.3543 in(2)
- 0.4331 in(2)
- 0.4528 in(2)
- 0.46 in(2)
- 0.5 in(1)
- 0.51 in(2)
- 0.5118 in(2)
- 0.5276 in(2)
- 0.6142 in(1)
- 0.6299 in(2)
- 0.6339 in(2)
- 0.6417 in(2)
- 0.65 in(1)
- 0.6693 in(2)
- 0.6772 in(1)
- 0.685 in(1)
- 0.75 in(1)
- 0.7717 in(1)
- 0.7874 in(2)
- 0.8465 in(1)
- 0.8661 in(4)
- 0.8819 in(1)
- 0.9843 in(3)
- 1.0 in(4)
- 1.063 in(9)
- 1.25 in(2)
- 1.2598 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 12.7 mm(3)
- 13.0 mm(4)
- 16.0 mm(4)
- 16.51 mm(1)
- 20.0 mm(3)
- 20.32 mm(2)
- 22.86 mm(2)
- 24.0 mm(2)
- 25.0 mm(2)
- 27.0 mm(1)
- 29.0 mm(4)
- 30.48 mm(1)
- 32.0 mm(4)
- 36.0 mm(1)
- 39.0 mm(1)
- 40.0 mm(5)
- 54.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.5 in(3)
- 0.5118 in(4)
- 0.6299 in(4)
- 0.65 in(1)
- 0.7874 in(3)
- 0.8 in(2)
- 0.9 in(2)
- 0.9449 in(2)
- 0.9843 in(2)
- 1.063 in(1)
- 1.1417 in(4)
- 1.2 in(1)
- 1.2598 in(4)
- 1.4173 in(1)
- 1.5354 in(1)
- 1.5748 in(5)
- 2.126 in(4)
to
Countersunk Angle
Countersunk Angle
- 15.0 (7)
- 27.5 (12)
- 30.0 (50)
to
Cutting Direction
Cutting Direction
- E (29)
- S (39)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (68)
Maximum Bore Depth
Maximum Bore Depth
- 0.9843 in(1)
- 1.0 in(1)
- 1.25 in(1)
- 1.2598 in(1)
- 1.3842 in(2)
- 1.5 in(1)
- 1.5748 in(1)
- 1.575 in(3)
- 1.6535 in(1)
- 1.6618 in(1)
- 1.772 in(1)
- 1.8896 in(1)
- 2.209 in(1)
- 2.25 in(2)
- 2.3622 in(3)
- 2.3624 in(1)
- 2.5 in(1)
- 2.7567 in(2)
- 2.9543 in(2)
- 3.0 in(1)
- 3.1496 in(4)
- 3.75 in(1)
- 3.7803 in(4)
- 3.9372 in(3)
- 4.5 in(1)
- 5.0392 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 25.0 mm(1)
- 25.4 mm(1)
- 31.75 mm(1)
- 32.0 mm(1)
- 35.16 mm(2)
- 38.1 mm(1)
- 40.0 mm(4)
- 42.0 mm(1)
- 42.21 mm(1)
- 45.0 mm(1)
- 48.0 mm(1)
- 56.11 mm(1)
- 57.15 mm(2)
- 60.0 mm(4)
- 63.5 mm(1)
- 70.02 mm(2)
- 75.04 mm(2)
- 76.2 mm(1)
- 80.0 mm(4)
- 95.25 mm(1)
- 96.02 mm(4)
- 100.0 mm(3)
- 114.3 mm(1)
- 128.0 mm(3)
to
Boring Bar Material
Boring Bar Material
- C (4)
- S (39)
Front-End
Clamp Style
Clamp Style
- C (14)
- M (4)
- S (51)
Insert Shape
Insert Shape
- LT-TRIANGLE LAY DOWN THREAD 60 (181)
- ON EDGE MISC (5)
Thread TPI
Thread TPI
- 4.0 (1)
- 4.5 (1)
- 7.0 (5)
- 8.0 (6)
- 10.0 (2)
- 11.0 (3)
- 11.5 (2)
- 12.0 (3)
- 13.0 (1)
- 14.0 (12)
- 16.0 (3)
- 18.0 (4)
- 19.0 (1)
- 20.0 (2)
- 24.0 (1)
- 28.0 (2)
- 32.0 (2)
- 48.0 (16)
to
Thread Pitch
Thread Pitch
- 0.35 mm(1)
- 0.5 mm(2)
- 0.7 mm(1)
- 0.75 mm(3)
- 0.8 mm(1)
- 1.0 mm(3)
- 1.25 mm(2)
- 1.5 mm(15)
- 1.75 mm(2)
- 2.0 mm(4)
- 2.5 mm(2)
- 3.0 mm(18)
- 3.5 mm(2)
- 4.0 mm(4)
- 4.5 mm(2)
- 5.0 mm(9)
- 5.5 mm(2)
- 6.0 mm(5)
to
Thread Pitch
Thread Pitch
- 0.35 in(1)
- 0.5 in(2)
- 0.7 in(1)
- 0.75 in(3)
- 0.8 in(1)
- 1.0 in(3)
- 1.25 in(2)
- 1.5 in(15)
- 1.75 in(2)
- 2.0 in(4)
- 2.5 in(2)
- 3.0 in(18)
- 3.5 in(2)
- 4.0 in(4)
- 4.5 in(2)
- 5.0 in(9)
- 5.5 in(2)
- 6.0 in(5)
to
Insert Geometry
Shape
Shape
- LT-TRIANGLE LAY DOWN THREAD 60 (117)
Insert IC Size
Insert IC Size
- 6.35 mm(8)
- 9.525 mm(83)
- 12.7 mm(18)
- 15.875 mm(6)
to
Insert IC Size
Insert IC Size
- 0.25 in(8)
- 0.375 in(83)
- 0.5 in(18)
- 0.625 in(6)
to
Insert Seat Size
Insert Seat Size
- 2 (8)
- 3 (84)
- 4 (18)
- 5 (7)
Cutting Tool Material
Cutting Tool Material
- H W (183)
Back-End
Connection Type
Connection Type
- BORING BAR (27)
- SQUARE SHANK (19)
- TAPER SHANK (22)
System Size
System Size
- KM40TS (22)
Back-End Diameter
Back-End Diameter
- 9.525 mm(2)
- 12.0 mm(1)
- 15.0 mm(1)
- 15.875 mm(1)
- 19.05 mm(5)
- 20.0 mm(7)
- 25.0 mm(3)
- 31.75 mm(1)
- 32.0 mm(6)
- 40.0 mm(23)
to
Shank Height
Shank Height
- 0.315 in(1)
- 0.5 in(1)
- 0.6299 in(2)
- 0.7087 in(5)
- 0.7409 in(2)
- 0.75 in(2)
- 0.7874 in(2)
- 0.8898 in(2)
- 0.9378 in(1)
- 0.9843 in(3)
- 1.0 in(5)
- 1.1417 in(5)
- 1.2134 in(1)
- 1.2598 in(3)
to
Shank Height
Shank Height
- 8.0 mm(1)
- 12.7 mm(1)
- 16.0 mm(2)
- 18.0 mm(5)
- 18.82 mm(2)
- 19.05 mm(2)
- 20.0 mm(2)
- 22.6 mm(2)
- 23.82 mm(1)
- 25.0 mm(3)
- 25.4 mm(5)
- 29.0 mm(5)
- 30.82 mm(1)
- 32.0 mm(3)
to
Shank Width
Shank Width
- 0.315 in(1)
- 0.5 in(1)
- 0.6299 in(2)
- 0.7283 in(5)
- 0.75 in(2)
- 0.7874 in(2)
- 0.8646 in(1)
- 0.9055 in(2)
- 0.9843 in(3)
- 1.0 in(5)
- 1.1402 in(1)
- 1.1811 in(5)
- 1.2598 in(3)
to
Shank Width
Shank Width
- 8.0 mm(1)
- 12.7 mm(1)
- 16.0 mm(2)
- 18.5 mm(5)
- 19.05 mm(2)
- 20.0 mm(2)
- 21.96 mm(1)
- 23.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(5)
- 28.96 mm(1)
- 30.0 mm(5)
- 32.0 mm(3)
to
No filters matching ""
