WMT Integral Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (201)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(201)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(201)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(201)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(201)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(201)
- M Stainless Steel (201)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(201)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(201)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(201)
- K Cast Iron (201)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(201)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(201)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(201)
- N Non-Ferrous Materials (201)
- N1Wrought Aluminum (201)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(201)
- N3High-Silicon Aluminum Alloys Si >12.2%(201)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (201)
- N6Carbon, Graphite Composites, CFRP (201)
- S High-Temp Alloys (201)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(201)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(201)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(201)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(201)
- H Hardened Materials (183)
- H1Hardened Materials 44-48 HRC(183)
- H2Hardened Materials 48-55 HRC(183)
Select All Star
- CN (40)
- DE (73)
- IN (28)
- SG (10)
- US (39)
Applications
Applications
Cut-Off (110)
Face Grooving (25)
Grooving (168)
ID Grooving (30)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (201)
- Lightly Interrupted Cut (201)
- Smooth Cut (183)
Connection Style
Connection Style
- Boring Bar Shank (30)
- Toolholder (177)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (201)
to
Over All Length [L]
Over All Length [L]
- 3.937 in(13)
- 4.5 in(13)
- 4.921 in(26)
- 4.9213 in(8)
- 5.0 in(31)
- 5.5 in(2)
- 5.512 in(2)
- 5.9055 in(27)
- 5.906 in(26)
- 6.0 in(29)
- 7.874 in(4)
- 8.0 in(4)
- 9.843 in(8)
- 10.0 in(7)
- 11.811 in(3)
- 11.817 in(1)
- 12.0 in(3)
to
Over All Length [L]
Over All Length [L]
- 100.0 mm(13)
- 114.3 mm(13)
- 125.0 mm(34)
- 127.0 mm(31)
- 139.7 mm(2)
- 140.0 mm(2)
- 150.0 mm(53)
- 152.4 mm(29)
- 200.0 mm(4)
- 203.2 mm(4)
- 250.0 mm(8)
- 254.0 mm(7)
- 300.0 mm(3)
- 300.15 mm(1)
- 304.8 mm(3)
to
Corner Radius
Corner Radius
- 0.003 in(53)
- 0.005 in(17)
- 0.006 in(52)
- 0.007 in(68)
- 0.009 in(45)
- 0.01 in(108)
- 0.012 in(131)
- 0.015 in(17)
- 0.023 in(23)
- 0.024 in(131)
- 0.03 in(131)
- 0.059 in(57)
- 0.06 in(45)
- 0.079 in(23)
- 0.08 in(23)
- 0.094 in(28)
- 0.098 in(28)
- 0.099 in(28)
- 0.118 in(23)
- 0.119 in(23)
- 0.125 in(23)
- 0.156 in(12)
- 0.157 in(12)
- 0.158 in(12)
to
Corner Radius
Corner Radius
- 0.075 mm(53)
- 0.125 mm(17)
- 0.15 mm(52)
- 0.175 mm(68)
- 0.225 mm(45)
- 0.25 mm(108)
- 0.3 mm(131)
- 0.375 mm(17)
- 0.575 mm(23)
- 0.6 mm(131)
- 0.75 mm(131)
- 1.5 mm(57)
- 1.525 mm(45)
- 2.0 mm(23)
- 2.025 mm(23)
- 2.4 mm(28)
- 2.5 mm(28)
- 2.525 mm(28)
- 3.0 mm(23)
- 3.025 mm(23)
- 3.175 mm(23)
- 3.95 mm(12)
- 4.0 mm(12)
- 4.025 mm(12)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- WP10CT (166)
- WP25CT (166)
- WU10HT (96)
- WU10PT (183)
- WU25PT (201)
Hand Of Tool
Hand Of Tool
- L (95)
- R (112)
Wiper Insert
Wiper Insert
- N (201)
- Y (138)
F Dimension
F Dimension
- 9.525 mm(5)
- 10.0 mm(4)
- 11.94 mm(2)
- 12.0 mm(7)
- 12.7 mm(8)
- 15.86 mm(4)
- 15.87 mm(1)
- 15.875 mm(4)
- 15.88 mm(1)
- 15.9 mm(1)
- 15.94 mm(2)
- 15.97 mm(2)
- 16.0 mm(14)
- 19.04 mm(1)
- 19.048 mm(1)
- 19.05 mm(16)
- 19.152 mm(2)
- 19.94 mm(2)
- 20.0 mm(18)
- 24.94 mm(1)
- 25.0 mm(42)
- 25.16 mm(2)
- 25.4 mm(19)
- 25.425 mm(1)
- 25.451 mm(1)
- 25.502 mm(3)
- 26.0 mm(4)
- 26.01 mm(4)
- 29.0 mm(8)
- 29.01 mm(7)
- 31.74 mm(2)
- 31.75 mm(2)
- 32.0 mm(9)
to
F Dimension
F Dimension
- 0.375 in(5)
- 0.3937 in(4)
- 0.47 in(2)
- 0.472 in(3)
- 0.4724 in(4)
- 0.5 in(8)
- 0.624 in(4)
- 0.625 in(6)
- 0.626 in(1)
- 0.628 in(2)
- 0.629 in(2)
- 0.6299 in(4)
- 0.63 in(10)
- 0.7499 in(1)
- 0.75 in(17)
- 0.754 in(2)
- 0.785 in(2)
- 0.787 in(9)
- 0.7874 in(4)
- 0.788 in(5)
- 0.982 in(1)
- 0.984 in(25)
- 0.9843 in(17)
- 0.991 in(2)
- 1.0 in(19)
- 1.001 in(1)
- 1.002 in(1)
- 1.004 in(3)
- 1.024 in(8)
- 1.142 in(15)
- 1.25 in(4)
- 1.26 in(9)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(1)
- 38.0 mm(2)
- 40.39 mm(4)
- 41.0 mm(4)
- 46.99 mm(7)
- 47.0 mm(8)
- 52.0 mm(4)
- 54.0 mm(4)
- 54.1 mm(3)
- 69.85 mm(2)
- 70.0 mm(8)
- 100.0 mm(9)
- 101.6 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2598 in(1)
- 1.4961 in(2)
- 1.59 in(4)
- 1.614 in(4)
- 1.85 in(15)
- 2.0472 in(4)
- 2.126 in(4)
- 2.13 in(3)
- 2.75 in(2)
- 2.7559 in(8)
- 3.937 in(9)
- 4.0 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(15)
- 1.0236 in(15)
- 1.024 in(2)
- 1.062 in(2)
- 1.125 in(2)
- 1.25 in(2)
- 1.26 in(3)
- 2.0472 in(3)
- 2.7559 in(4)
- 3.937 in(8)
- 4.0 in(2)
- 8.0 in(2)
- 8.0709 in(9)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(15)
- 25.999 mm(7)
- 26.0 mm(10)
- 26.975 mm(2)
- 28.575 mm(2)
- 31.75 mm(2)
- 32.0 mm(3)
- 52.0 mm(3)
- 70.0 mm(4)
- 100.0 mm(8)
- 101.6 mm(2)
- 203.2 mm(2)
- 205.0 mm(9)
to
Cutting Direction
Cutting Direction
- E (177)
- S (30)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (30)
- NEUTRAL (ZERO) (1)
Maximum Bore Depth
Maximum Bore Depth
- 1.97 in(8)
- 2.52 in(13)
- 2.54 in(2)
- 3.15 in(3)
- 3.31 in(2)
- 3.32 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 50.0 mm(8)
- 64.0 mm(13)
- 64.4 mm(2)
- 80.0 mm(3)
- 84.0 mm(2)
- 84.4 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (30)
Front-End
Clamp Style
Clamp Style
- C (3)
- S (4)
- Y (185)
Cutting Width
Cutting Width
- 0.059 in(18)
- 0.079 in(35)
- 0.084 in(35)
- 0.094 in(17)
- 0.118 in(45)
- 0.123 in(45)
- 0.125 in(45)
- 0.156 in(23)
- 0.157 in(23)
- 0.158 in(23)
- 0.163 in(23)
- 0.188 in(28)
- 0.197 in(28)
- 0.202 in(28)
- 0.236 in(23)
- 0.241 in(23)
- 0.249 in(23)
- 0.25 in(23)
- 0.312 in(12)
- 0.315 in(12)
- 0.32 in(12)
to
Cutting Width
Cutting Width
- 1.5 mm(18)
- 1.99 mm(35)
- 2.0 mm(35)
- 2.13 mm(35)
- 2.38 mm(17)
- 2.39 mm(17)
- 3.0 mm(45)
- 3.13 mm(45)
- 3.17 mm(45)
- 3.18 mm(45)
- 3.95 mm(23)
- 3.96 mm(23)
- 4.0 mm(23)
- 4.13 mm(23)
- 4.76 mm(28)
- 4.77 mm(28)
- 4.78 mm(28)
- 5.0 mm(28)
- 5.13 mm(28)
- 6.0 mm(23)
- 6.12 mm(23)
- 6.13 mm(23)
- 6.32 mm(23)
- 6.34 mm(23)
- 6.35 mm(23)
- 6.36 mm(23)
- 7.92 mm(12)
- 7.94 mm(12)
- 8.0 mm(12)
- 8.13 mm(12)
to
Insert Size
Insert Size
- 1 (18)
- 2 (32)
- 2B (18)
- 3 (45)
- 4 (27)
- 5 (29)
- 6 (23)
- 8 (12)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.3937 in(15)
- 0.42 in(3)
- 0.433 in(9)
- 0.4331 in(2)
- 0.44 in(8)
- 0.4921 in(1)
- 0.5118 in(17)
- 0.512 in(2)
- 0.531 in(2)
- 0.551 in(11)
- 0.5512 in(1)
- 0.56 in(9)
- 0.5625 in(2)
- 0.6102 in(2)
- 0.625 in(4)
- 0.6252 in(1)
- 0.6299 in(4)
- 0.63 in(11)
- 0.65 in(16)
- 0.7283 in(2)
- 0.748 in(20)
- 0.75 in(10)
- 0.866 in(19)
- 0.875 in(8)
- 0.944 in(5)
- 0.984 in(9)
- 0.9843 in(3)
- 1.0 in(11)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 10.0 mm(15)
- 10.668 mm(2)
- 10.67 mm(1)
- 11.0 mm(11)
- 11.176 mm(4)
- 11.18 mm(4)
- 12.5 mm(1)
- 12.9995 mm(7)
- 13.0 mm(12)
- 13.4875 mm(2)
- 14.0 mm(12)
- 14.22 mm(3)
- 14.224 mm(6)
- 14.2875 mm(2)
- 15.5 mm(2)
- 15.875 mm(3)
- 15.88 mm(1)
- 15.883 mm(1)
- 16.0 mm(15)
- 16.5 mm(8)
- 16.51 mm(8)
- 18.5 mm(2)
- 19.0 mm(20)
- 19.05 mm(9)
- 19.06 mm(1)
- 22.0 mm(19)
- 22.22 mm(4)
- 22.225 mm(4)
- 23.97 mm(5)
- 25.0 mm(12)
- 25.4 mm(11)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- H W (201)
Back-End
Connection Type
Connection Type
- BORING BAR (30)
- SQUARE SHANK (172)
Back-End Diameter
Back-End Diameter
- 25.0 mm(4)
- 25.4 mm(4)
- 31.7 mm(1)
- 31.75 mm(6)
- 32.0 mm(8)
- 38.1 mm(3)
- 40.0 mm(4)
to
Shank Height
Shank Height
- 0.375 in(5)
- 0.3937 in(4)
- 0.472 in(5)
- 0.4724 in(4)
- 0.5 in(8)
- 0.625 in(13)
- 0.6299 in(4)
- 0.63 in(12)
- 0.75 in(20)
- 0.787 in(16)
- 0.7874 in(4)
- 0.978 in(10)
- 0.984 in(22)
- 0.9842 in(14)
- 0.9843 in(3)
- 0.99 in(4)
- 1.0 in(23)
- 1.25 in(2)
- 1.26 in(4)
to
Shank Height
Shank Height
- 9.525 mm(5)
- 10.0 mm(4)
- 12.0 mm(9)
- 12.7 mm(8)
- 15.875 mm(5)
- 15.88 mm(8)
- 16.0 mm(16)
- 19.05 mm(20)
- 20.0 mm(20)
- 24.84 mm(10)
- 25.0 mm(39)
- 25.146 mm(4)
- 25.4 mm(23)
- 31.75 mm(2)
- 32.0 mm(4)
to
Shank Width
Shank Width
- 0.375 in(5)
- 0.3937 in(4)
- 0.46 in(2)
- 0.472 in(3)
- 0.4724 in(4)
- 0.5 in(8)
- 0.6236 in(2)
- 0.6244 in(2)
- 0.625 in(13)
- 0.63 in(12)
- 0.75 in(20)
- 0.7811 in(1)
- 0.7819 in(2)
- 0.787 in(16)
- 0.7874 in(1)
- 0.978 in(10)
- 0.984 in(21)
- 0.9842 in(14)
- 0.9843 in(3)
- 0.99 in(4)
- 1.0 in(24)
- 1.207 in(1)
- 1.25 in(1)
- 1.26 in(4)
to
Shank Width
Shank Width
- 9.525 mm(5)
- 10.0 mm(4)
- 11.69 mm(2)
- 12.0 mm(7)
- 12.7 mm(8)
- 15.84 mm(2)
- 15.86 mm(2)
- 15.875 mm(5)
- 15.88 mm(8)
- 16.0 mm(12)
- 19.05 mm(20)
- 19.84 mm(1)
- 19.86 mm(2)
- 20.0 mm(17)
- 24.84 mm(10)
- 25.0 mm(38)
- 25.146 mm(4)
- 25.4 mm(24)
- 30.66 mm(1)
- 31.75 mm(1)
- 32.0 mm(4)
to
No filters matching ""
