When it comes to added value and precision machining WIDIA 0°/90° shoulder mills permit excellent shoulder finishes, enhanced chip evacuation, and optimal insert support. Whether you’re using them for profiling, ramping, slotting, plunging, or helical and circular interpolation operations, these shoulder mills will provide the accuracy you need. WIDIA 0°/90° shoulder mills can handle a variety of materials including aluminum, steel, stainless steel, and exotic alloys. Reduce your machining times and increase productivity with WIDIA high-performance shoulder milling systems.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (706)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(637)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(706)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(706)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(706)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(706)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(703)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(703)
- M Stainless Steel (711)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(711)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(711)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(711)
- K Cast Iron (691)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(691)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(676)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(676)
- N Non-Ferrous Materials (511)
- N1Wrought Aluminum (511)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(511)
- N3High-Silicon Aluminum Alloys Si >12.2%(500)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
- N6Carbon, Graphite Composites, CFRP (25)
- N7MMC's (25)
- S High-Temp Alloys (707)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(651)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(651)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(651)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(707)
- H Hardened Materials (471)
- H1Hardened Materials 44-48 HRC(471)
Select All Star
- CN (239)
- DE (431)
- GB (86)
- IN (122)
- SG (168)
- US (182)
Applications
Applications
Face Milling (322)
Pocket (183)
Pocket Helical (144)
Pocket Milling (205)
Pocket Plunge Milling (61)
Profile Milling (70)
Ramping (161)
Shoulder Bottom Shoulder (106)
Shoulder Milling (322)
Slot Milling (195)
Slot Side (19)
Slot Square End (194)
Cutting Diameter
Cutting Diameter
- 0.47 in(2)
- 0.472 in(1)
- 0.5 in(2)
- 0.62 in(5)
- 0.625 in(6)
- 0.6299 in(1)
- 0.63 in(6)
- 0.669 in(1)
- 0.7 in(3)
- 0.709 in(1)
- 0.75 in(13)
- 0.78 in(8)
- 0.787 in(9)
- 0.7874 in(1)
- 0.86 in(3)
- 0.866 in(1)
- 0.98 in(8)
- 0.984 in(18)
- 0.9843 in(2)
- 1.0 in(30)
- 1.102 in(1)
- 1.18 in(1)
- 1.25 in(34)
- 1.2598 in(4)
- 1.26 in(23)
- 1.378 in(2)
- 1.5 in(24)
- 1.57 in(1)
- 1.5748 in(3)
- 1.575 in(18)
- 1.967 in(1)
- 1.968 in(3)
- 1.9685 in(3)
- 1.969 in(13)
- 2.0 in(18)
- 2.48 in(14)
- 2.4803 in(3)
- 2.5 in(13)
- 3.0 in(15)
- 3.1496 in(4)
- 3.15 in(15)
- 3.937 in(14)
- 4.0 in(11)
- 4.921 in(10)
- 4.9213 in(4)
- 5.0 in(8)
- 6.0 in(6)
- 6.299 in(2)
- 6.2992 in(6)
- 7.874 in(3)
- 8.0 in(3)
- 9.8425 in(1)
- 10.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 12.0 mm(3)
- 12.7 mm(2)
- 15.875 mm(4)
- 15.88 mm(2)
- 16.0 mm(12)
- 17.0 mm(1)
- 18.0 mm(4)
- 19.05 mm(13)
- 20.0 mm(18)
- 22.0 mm(4)
- 25.0 mm(28)
- 25.4 mm(30)
- 28.0 mm(1)
- 30.0 mm(1)
- 31.7 mm(6)
- 31.75 mm(19)
- 32.0 mm(36)
- 35.0 mm(2)
- 38.1 mm(24)
- 40.0 mm(22)
- 50.0 mm(20)
- 50.8 mm(18)
- 63.0 mm(17)
- 63.5 mm(13)
- 76.2 mm(14)
- 76.4 mm(1)
- 80.0 mm(19)
- 100.0 mm(14)
- 101.6 mm(11)
- 125.0 mm(14)
- 127.0 mm(8)
- 152.4 mm(6)
- 160.0 mm(8)
- 200.0 mm(3)
- 203.2 mm(3)
- 250.0 mm(1)
- 254.0 mm(1)
to
Cutting Length
Cutting Length
- 6.0 mm(9)
- 9.0 mm(10)
- 9.5 mm(4)
- 9.8 mm(44)
- 10.0 mm(99)
- 10.16 mm(4)
- 11.32 mm(13)
- 11.38 mm(3)
- 11.4 mm(3)
- 11.44 mm(12)
- 11.444 mm(2)
- 11.46 mm(1)
- 11.516 mm(1)
- 11.52 mm(16)
- 11.528 mm(1)
- 11.53 mm(10)
- 11.55 mm(14)
- 11.554 mm(1)
- 11.57 mm(3)
- 11.71 mm(3)
- 12.0 mm(5)
- 12.7 mm(2)
- 13.97 mm(3)
- 14.0 mm(12)
- 15.0 mm(49)
- 15.297 mm(1)
- 15.36 mm(1)
- 15.5 mm(2)
- 15.6 mm(1)
- 15.7 mm(8)
- 15.8 mm(3)
- 15.9 mm(4)
- 16.0 mm(4)
- 16.1 mm(6)
- 16.2 mm(17)
- 16.3 mm(16)
- 16.4 mm(4)
- 20.0 mm(9)
- 51.62 mm(1)
- 60.4 mm(1)
- 104.6 mm(1)
to
Cutting Length
Cutting Length
- 0.236 in(5)
- 0.2362 in(4)
- 0.354 in(2)
- 0.3543 in(8)
- 0.374 in(4)
- 0.3869 in(1)
- 0.387 in(2)
- 0.3871 in(1)
- 0.3872 in(39)
- 0.3873 in(1)
- 0.394 in(99)
- 0.4 in(4)
- 0.446 in(13)
- 0.448 in(3)
- 0.449 in(3)
- 0.4506 in(2)
- 0.451 in(13)
- 0.453 in(16)
- 0.4534 in(1)
- 0.4539 in(1)
- 0.454 in(10)
- 0.4549 in(1)
- 0.455 in(14)
- 0.456 in(3)
- 0.461 in(3)
- 0.472 in(5)
- 0.5 in(2)
- 0.55 in(3)
- 0.551 in(6)
- 0.5512 in(6)
- 0.591 in(49)
- 0.6022 in(1)
- 0.6046 in(1)
- 0.61 in(1)
- 0.6102 in(1)
- 0.616 in(1)
- 0.617 in(2)
- 0.618 in(1)
- 0.6181 in(5)
- 0.621 in(1)
- 0.623 in(2)
- 0.626 in(4)
- 0.629 in(4)
- 0.635 in(6)
- 0.638 in(17)
- 0.641 in(12)
- 0.642 in(4)
- 0.647 in(4)
- 0.7874 in(9)
- 2.032 in(1)
- 2.38 in(1)
- 4.12 in(1)
to
Reach
Reach
- 0.709 in(1)
- 0.7165 in(1)
- 0.791 in(1)
- 0.795 in(1)
- 0.8 in(1)
- 0.803 in(1)
- 0.827 in(3)
- 0.8386 in(1)
- 0.844 in(2)
- 0.85 in(1)
- 0.9 in(1)
- 0.984 in(16)
- 0.9843 in(1)
- 0.9921 in(1)
- 1.0 in(2)
- 1.063 in(1)
- 1.0708 in(1)
- 1.1 in(3)
- 1.102 in(8)
- 1.17 in(2)
- 1.181 in(5)
- 1.1811 in(2)
- 1.1857 in(1)
- 1.22 in(16)
- 1.2205 in(1)
- 1.221 in(1)
- 1.25 in(8)
- 1.2599 in(1)
- 1.26 in(9)
- 1.282 in(1)
- 1.2864 in(1)
- 1.298 in(1)
- 1.299 in(2)
- 1.378 in(1)
- 1.437 in(1)
- 1.47 in(3)
- 1.5 in(8)
- 1.535 in(4)
- 1.5354 in(3)
- 1.5655 in(1)
- 1.5669 in(1)
- 1.5748 in(12)
- 1.575 in(68)
- 1.577 in(9)
- 1.58 in(4)
- 1.5945 in(1)
- 1.6 in(6)
- 1.61 in(2)
- 1.614 in(5)
- 1.693 in(5)
- 1.72 in(8)
- 1.732 in(2)
- 1.75 in(19)
- 1.772 in(1)
- 1.81 in(2)
- 1.9 in(2)
- 1.929 in(2)
- 1.968 in(7)
- 1.9684 in(1)
- 1.9685 in(8)
- 1.9686 in(1)
- 1.969 in(33)
- 1.97 in(1)
- 1.9882 in(1)
- 2.0 in(22)
- 2.0244 in(1)
- 2.1 in(2)
- 2.22 in(1)
- 2.25 in(7)
- 2.3622 in(1)
- 2.38 in(16)
- 2.3819 in(1)
- 2.4494 in(1)
- 2.48 in(12)
- 2.4803 in(11)
- 2.481 in(2)
- 2.51 in(1)
- 2.559 in(1)
- 2.5986 in(1)
- 3.0 in(1)
- 3.5 in(1)
- 5.5 in(1)
to
Reach
Reach
- 18.0 mm(1)
- 18.2 mm(1)
- 20.1 mm(1)
- 20.2 mm(1)
- 20.32 mm(1)
- 20.4 mm(1)
- 21.0 mm(4)
- 21.44 mm(2)
- 21.59 mm(1)
- 22.86 mm(1)
- 25.0 mm(17)
- 25.2 mm(1)
- 25.4 mm(2)
- 27.0 mm(1)
- 27.1978 mm(1)
- 27.94 mm(3)
- 28.0 mm(8)
- 29.72 mm(2)
- 30.0 mm(7)
- 30.1168 mm(1)
- 30.99 mm(8)
- 31.0 mm(10)
- 31.7 mm(1)
- 31.75 mm(7)
- 32.0 mm(10)
- 32.55 mm(1)
- 32.674 mm(1)
- 33.0 mm(3)
- 35.0 mm(1)
- 36.5 mm(1)
- 37.34 mm(3)
- 38.1 mm(8)
- 39.0 mm(7)
- 39.7637 mm(1)
- 39.8 mm(1)
- 40.0 mm(79)
- 40.005 mm(5)
- 40.05 mm(9)
- 40.5 mm(1)
- 40.64 mm(6)
- 40.89 mm(2)
- 41.0 mm(5)
- 43.0 mm(5)
- 43.688 mm(2)
- 43.69 mm(6)
- 44.0 mm(2)
- 44.4 mm(2)
- 44.45 mm(15)
- 44.5 mm(2)
- 45.0 mm(1)
- 45.97 mm(2)
- 48.26 mm(2)
- 49.0 mm(2)
- 50.0 mm(51)
- 50.5 mm(1)
- 50.8 mm(22)
- 51.4198 mm(1)
- 53.34 mm(2)
- 56.388 mm(1)
- 57.0 mm(1)
- 57.147 mm(1)
- 57.15 mm(5)
- 60.0 mm(1)
- 60.45 mm(3)
- 60.452 mm(13)
- 60.5 mm(1)
- 62.2148 mm(1)
- 63.0 mm(26)
- 63.75 mm(1)
- 65.0 mm(1)
- 76.2 mm(1)
- 88.9 mm(1)
- 139.7 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (395)
- 90.25 (2)
- 90.28 (2)
- 90.4 (4)
to
Connection Style
Connection Style
- A-Socket Head Cap Screw (155)
- B-Cutter Retention Screw (17)
- C-Bolt Circle (12)
- KL Screw (1)
- SHCS or RetScrw Or BoltCircle (4)
- Screw-On Connection (33)
- Straight-Cylindrical (107)
- Weldon (74)
Number of Flutes
Number of Flutes
- 1 (3)
- 10 (12)
- 11 (5)
- 12 (13)
- 14 (6)
- 16 (4)
- 2 (61)
- 22 (2)
- 3 (75)
- 4 (72)
- 5 (52)
- 6 (36)
- 7 (19)
- 8 (23)
- 9 (20)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (147)
- 2.0 (504)
- 4.0 (300)
- 8.0 (66)
to
Over All Length [L]
Over All Length [L]
- 1.5 in(2)
- 1.5748 in(6)
- 1.575 in(57)
- 1.577 in(9)
- 1.58 in(4)
- 1.681 in(2)
- 1.75 in(14)
- 1.772 in(1)
- 1.887 in(1)
- 1.89 in(2)
- 1.968 in(6)
- 1.9684 in(1)
- 1.9685 in(8)
- 1.9686 in(1)
- 1.969 in(20)
- 2.0 in(15)
- 2.047 in(1)
- 2.0472 in(1)
- 2.116 in(2)
- 2.126 in(3)
- 2.244 in(1)
- 2.38 in(16)
- 2.465 in(6)
- 2.48 in(13)
- 2.4803 in(14)
- 2.481 in(2)
- 2.539 in(10)
- 2.5986 in(1)
- 2.6378 in(1)
- 2.75 in(2)
- 2.756 in(3)
- 2.913 in(1)
- 2.953 in(1)
- 3.0 in(1)
- 3.11 in(3)
- 3.1102 in(1)
- 3.15 in(1)
- 3.189 in(3)
- 3.2 in(2)
- 3.228 in(1)
- 3.2283 in(1)
- 3.25 in(5)
- 3.2701 in(1)
- 3.397 in(2)
- 3.465 in(3)
- 3.5 in(5)
- 3.504 in(5)
- 3.543 in(3)
- 3.6 in(2)
- 3.75 in(4)
- 3.7795 in(3)
- 3.78 in(1)
- 3.937 in(11)
- 4.0 in(13)
- 4.03 in(1)
- 4.3 in(3)
- 4.331 in(12)
- 4.3504 in(1)
- 4.37 in(2)
- 4.5 in(8)
- 4.53 in(5)
- 4.724 in(4)
- 4.8 in(4)
- 5.118 in(5)
- 5.2 in(3)
- 5.5 in(1)
- 5.905 in(1)
- 5.906 in(4)
- 6.0 in(4)
- 6.2992 in(2)
- 6.693 in(10)
- 6.7 in(5)
- 7.0866 in(1)
- 7.874 in(5)
- 8.0 in(11)
- 8.268 in(4)
- 8.6614 in(1)
- 9.8 in(4)
- 9.8425 in(1)
- 9.843 in(3)
to
Over All Length [L]
Over All Length [L]
- 38.1 mm(2)
- 40.0 mm(62)
- 40.005 mm(5)
- 40.05 mm(9)
- 42.7 mm(2)
- 44.45 mm(12)
- 44.5 mm(2)
- 45.0 mm(1)
- 47.94 mm(1)
- 48.0 mm(2)
- 50.0 mm(36)
- 50.8 mm(15)
- 52.0 mm(2)
- 53.7 mm(1)
- 53.75 mm(1)
- 54.0 mm(3)
- 57.0 mm(1)
- 60.45 mm(3)
- 60.452 mm(13)
- 62.6 mm(6)
- 63.0 mm(30)
- 64.5 mm(10)
- 67.0 mm(1)
- 69.85 mm(2)
- 70.0 mm(3)
- 74.0 mm(1)
- 75.0 mm(1)
- 76.2 mm(1)
- 79.0 mm(4)
- 80.0 mm(1)
- 81.0 mm(3)
- 81.28 mm(2)
- 82.0 mm(2)
- 82.55 mm(5)
- 83.06 mm(1)
- 88.0 mm(3)
- 88.9 mm(4)
- 89.0 mm(6)
- 90.0 mm(3)
- 91.44 mm(2)
- 95.25 mm(4)
- 96.0 mm(4)
- 100.0 mm(13)
- 101.6 mm(13)
- 102.36 mm(1)
- 109.22 mm(3)
- 110.0 mm(12)
- 110.5 mm(1)
- 111.0 mm(2)
- 114.3 mm(8)
- 115.06 mm(3)
- 115.062 mm(2)
- 120.0 mm(4)
- 121.9 mm(1)
- 121.92 mm(3)
- 130.0 mm(5)
- 132.08 mm(1)
- 132.1 mm(2)
- 139.7 mm(1)
- 150.0 mm(5)
- 152.4 mm(4)
- 160.0 mm(2)
- 170.0 mm(10)
- 170.18 mm(4)
- 170.2 mm(1)
- 180.0 mm(1)
- 200.0 mm(5)
- 203.2 mm(11)
- 210.0 mm(4)
- 220.0 mm(1)
- 248.9 mm(2)
- 248.92 mm(2)
- 250.0 mm(4)
to
Corner Radius
Corner Radius
- 0.008 in(100)
- 0.016 in(373)
- 0.031 in(560)
- 0.047 in(458)
- 0.063 in(427)
- 0.065 in(7)
- 0.067 in(2)
- 0.079 in(243)
- 0.083 in(1)
- 0.094 in(172)
- 0.098 in(21)
- 0.122 in(90)
- 0.125 in(20)
- 0.126 in(170)
- 0.157 in(86)
- 0.236 in(62)
to
Corner Radius
Corner Radius
- 0.2 mm(100)
- 0.4 mm(373)
- 0.775 mm(93)
- 0.8 mm(551)
- 1.2 mm(458)
- 1.6 mm(427)
- 1.65 mm(7)
- 1.7 mm(2)
- 2.0 mm(243)
- 2.1 mm(1)
- 2.4 mm(172)
- 2.5 mm(21)
- 3.1 mm(90)
- 3.175 mm(20)
- 3.2 mm(170)
- 4.0 mm(86)
- 6.0 mm(62)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (42)
- THM-U (36)
- THR (18)
- THR-S (11)
- TN6405 (23)
- TN6425 (24)
- TN6430 (31)
- TN6501 (18)
- TN6502 (18)
- TN6510 (24)
- TN6520 (43)
- TN6525 (44)
- TN6540 (66)
- TTI25 (30)
- TTM08 (30)
- WDN10U (86)
- WK15CM (439)
- WK15PM (308)
- WK20PM (118)
- WN10HM (154)
- WN25PM (348)
- WP25PM (376)
- WP35CM (444)
- WP40PM (393)
- WS30PM (122)
- WS40PM (394)
- WU10PM (135)
- WU20PM (239)
- WU35PM (255)
Hand Of Tool
Hand Of Tool
- R (403)
Rough Finish
Rough Finish
- FR (5)
- R (1)
Wiper Insert
Wiper Insert
- N (449)
- Y (22)
Maximum Ramp Angle
Maximum Ramp Angle
- 0.7 (3)
- 0.9 (4)
- 1.1 (1)
- 1.2 (3)
- 1.3 (3)
- 1.5 (5)
- 1.6 (2)
- 1.7 (2)
- 1.8 (1)
- 1.9 (5)
- 2.0 (4)
- 2.1 (4)
- 2.5 (1)
- 2.6 (3)
- 2.8 (2)
- 3.0 (8)
- 3.2 (1)
- 3.6 (13)
- 3.7 (2)
- 4.0 (8)
- 4.2 (1)
- 4.3 (9)
- 5.0 (1)
- 5.1 (9)
- 5.3 (8)
- 5.7 (6)
- 5.8 (6)
- 6.6 (1)
- 7.8 (8)
- 8.0 (2)
- 8.5 (4)
- 8.6 (7)
- 8.8 (4)
- 9.7 (1)
- 10.0 (5)
- 12.5 (2)
to
Front-End
Insert Shape
Insert Shape
- A-PARALLELOGRAM 85 (13)
- S-SQUARE 90 (133)
- X-PARALLELOGRAM 75 (316)
- X-PARALLELOGRAM 80 (174)
- X-RECTANGLE MILL 4 90 (251)
- X-RH0MBIC 70 (14)
Neck Diameter
Neck Diameter
- 0.371 in(2)
- 0.392 in(1)
- 0.467 in(1)
- 0.539 in(2)
- 0.5436 in(1)
- 0.544 in(4)
- 0.576 in(1)
- 0.61 in(1)
- 0.635 in(1)
- 0.67 in(6)
- 0.7088 in(1)
- 0.709 in(6)
- 0.722 in(1)
- 0.728 in(5)
- 0.74 in(1)
- 0.768 in(3)
- 0.785 in(1)
- 0.827 in(3)
- 0.843 in(3)
- 0.866 in(2)
- 0.8956 in(1)
- 0.896 in(4)
- 0.912 in(6)
- 0.929 in(1)
- 0.965 in(8)
- 0.98 in(3)
- 0.984 in(1)
- 0.9843 in(1)
- 1.084 in(1)
- 1.093 in(4)
- 1.102 in(5)
- 1.149 in(4)
- 1.1596 in(1)
- 1.16 in(7)
- 1.1614 in(1)
- 1.22 in(3)
- 1.228 in(2)
- 1.24 in(1)
- 1.3031 in(1)
- 1.343 in(6)
- 1.417 in(5)
to
Neck Diameter
Neck Diameter
- 9.42 mm(2)
- 9.95 mm(1)
- 11.85 mm(1)
- 13.7 mm(2)
- 13.807 mm(1)
- 13.81 mm(4)
- 14.64 mm(1)
- 15.5 mm(1)
- 16.14 mm(1)
- 17.002 mm(1)
- 17.02 mm(5)
- 18.0 mm(6)
- 18.004 mm(1)
- 18.35 mm(1)
- 18.5 mm(5)
- 18.8 mm(1)
- 19.5 mm(3)
- 19.95 mm(1)
- 21.0 mm(3)
- 21.4 mm(3)
- 22.749 mm(1)
- 22.75 mm(6)
- 23.16 mm(6)
- 23.59 mm(1)
- 24.5 mm(8)
- 24.9 mm(3)
- 25.0 mm(2)
- 27.52 mm(1)
- 27.75 mm(4)
- 28.0 mm(5)
- 29.2 mm(4)
- 29.45 mm(7)
- 29.454 mm(1)
- 29.5 mm(1)
- 31.0 mm(3)
- 31.2 mm(2)
- 31.5 mm(1)
- 33.1 mm(1)
- 34.1 mm(6)
- 36.0 mm(5)
to
Insert Geometry
Shape
Shape
- A-PARALLELOGRAM 85 (9)
- S-SQUARE 90 (67)
- X-PARALLELOGRAM 75 (173)
- X-PARALLELOGRAM 80 (123)
- X-RECTANGLE MILL 4 90 (95)
- X-RH0MBIC 70 (4)
Insert IC Size
Insert IC Size
- 9.525 mm(5)
- 12.0 mm(22)
- 12.7 mm(35)
- 15.88 mm(10)
to
Insert IC Size
Insert IC Size
- 0.375 in(5)
- 0.4724 in(22)
- 0.5 in(31)
- 0.501 in(4)
- 0.625 in(10)
to
Cutting Edge Length
Cutting Edge Length
- 7.0 mm(15)
- 8.875 mm(1)
- 8.956 mm(1)
- 9.003 mm(1)
- 9.176 mm(1)
- 9.46 mm(1)
- 9.47 mm(4)
- 9.482 mm(1)
- 9.88 mm(2)
- 10.37 mm(4)
- 10.44 mm(5)
- 10.8 mm(10)
- 10.804 mm(5)
- 10.805 mm(3)
- 10.831 mm(4)
- 10.832 mm(12)
- 11.0 mm(14)
- 11.44 mm(3)
- 11.47 mm(6)
- 11.68 mm(3)
- 11.72 mm(10)
- 11.73 mm(30)
- 11.74 mm(14)
- 11.75 mm(22)
- 11.756 mm(4)
- 12.0 mm(22)
- 12.7 mm(34)
- 12.8 mm(1)
- 15.3 mm(60)
- 15.64 mm(3)
- 15.67 mm(61)
- 15.672 mm(1)
- 15.772 mm(3)
- 15.875 mm(5)
- 15.88 mm(10)
- 16.297 mm(3)
- 16.3 mm(3)
- 16.55 mm(4)
- 16.553 mm(3)
- 16.7 mm(2)
- 16.703 mm(3)
- 16.706 mm(6)
- 16.709 mm(2)
- 16.71 mm(40)
- 16.72 mm(10)
- 17.0 mm(9)
to
Cutting Edge Length
Cutting Edge Length
- 0.0617 in(4)
- 0.276 in(15)
- 0.3494 in(1)
- 0.3526 in(1)
- 0.3545 in(1)
- 0.3613 in(1)
- 0.3724 in(1)
- 0.3728 in(4)
- 0.3733 in(1)
- 0.389 in(2)
- 0.4083 in(4)
- 0.411 in(2)
- 0.4111 in(3)
- 0.4252 in(10)
- 0.4254 in(8)
- 0.4264 in(4)
- 0.4265 in(12)
- 0.433 in(14)
- 0.45 in(3)
- 0.452 in(6)
- 0.46 in(3)
- 0.461 in(2)
- 0.462 in(58)
- 0.4626 in(9)
- 0.4628 in(4)
- 0.463 in(7)
- 0.4724 in(22)
- 0.5 in(34)
- 0.5039 in(1)
- 0.602 in(60)
- 0.616 in(3)
- 0.6169 in(57)
- 0.617 in(1)
- 0.6209 in(3)
- 0.625 in(13)
- 0.6252 in(2)
- 0.6416 in(3)
- 0.642 in(3)
- 0.6517 in(3)
- 0.652 in(4)
- 0.6576 in(3)
- 0.6577 in(6)
- 0.6578 in(2)
- 0.658 in(52)
- 0.669 in(9)
to
Chip Breaker CBMD
Chip Breaker CBMD
- AL (14)
- ALP (38)
- GE (13)
- MH (71)
- ML (94)
- MM (165)
- MR (3)
- MS (12)
- MU (6)
Cutting Tool Material
Cutting Tool Material
- D P (2)
- H T (3)
- H W (466)
Tolerance Class
Tolerance Class
- C (71)
- E (4)
- G (51)
- H (97)
- M (79)
- N (14)
- P (155)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (181)
- SCREW-ON (33)
- SHELL MILL (189)
Back-End Diameter
Back-End Diameter
- 12.0 mm(3)
- 12.7 mm(2)
- 13.0 mm(2)
- 15.87 mm(3)
- 15.875 mm(4)
- 16.0 mm(25)
- 18.0 mm(3)
- 19.0 mm(7)
- 19.04 mm(1)
- 19.05 mm(38)
- 19.1 mm(6)
- 20.0 mm(21)
- 21.0 mm(6)
- 22.0 mm(39)
- 22.01 mm(1)
- 24.37 mm(1)
- 25.0 mm(32)
- 25.4 mm(51)
- 27.0 mm(17)
- 28.0 mm(3)
- 29.0 mm(16)
- 31.7 mm(7)
- 31.75 mm(15)
- 32.0 mm(39)
- 38.1 mm(25)
- 40.0 mm(22)
- 40.012 mm(1)
- 50.8 mm(5)
- 60.0 mm(4)
- 63.5 mm(4)
to
Back-End Diameter
Back-End Diameter
- 0.47 in(1)
- 0.4724 in(2)
- 0.5 in(2)
- 0.512 in(2)
- 0.625 in(7)
- 0.6299 in(5)
- 0.63 in(20)
- 0.709 in(1)
- 0.71 in(2)
- 0.75 in(52)
- 0.787 in(8)
- 0.7874 in(4)
- 0.79 in(9)
- 0.827 in(6)
- 0.866 in(6)
- 0.8661 in(14)
- 0.8666 in(5)
- 0.867 in(11)
- 0.87 in(4)
- 0.9594 in(1)
- 0.98 in(8)
- 0.984 in(18)
- 0.9843 in(6)
- 1.0 in(51)
- 1.06 in(1)
- 1.063 in(12)
- 1.064 in(3)
- 1.096 in(1)
- 1.1024 in(3)
- 1.14 in(1)
- 1.142 in(15)
- 1.25 in(22)
- 1.2598 in(10)
- 1.26 in(29)
- 1.5 in(25)
- 1.574 in(1)
- 1.5748 in(7)
- 1.575 in(13)
- 1.5753 in(1)
- 1.58 in(1)
- 2.0 in(5)
- 2.36 in(4)
- 2.5 in(4)
to
No filters matching ""
