Finishers

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (99)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(99)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(99)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(98)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(87)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(87)
    • M Stainless Steel (99)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(99)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(98)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(87)
    • K Cast Iron (99)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(99)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(98)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(87)
    • N Non-Ferrous Materials (11)
      • N1
        Wrought Aluminum (11)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(11)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(10)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (11)
      • N6
        Carbon, Graphite Composites, CFRP (11)
    • S High-Temp Alloys (87)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(87)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(87)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(87)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(87)
    • H Hardened Materials (88)
      • H1
        Hardened Materials 44-48 HRC(88)
      • H2
        Hardened Materials 48-55 HRC(10)
    Select All Star
    • CN (9)
    • DE (18)
    • GB (11)
    • SG (6)
    • US (32)
    Applications
    Applications
    • PocketPocket (54)
    • Pocket HelicalPocket Helical (64)
    • Pocket MillingPocket Milling (64)
    • Pocket Plunge MillingPocket Plunge Milling (10)
    • Profile MillingProfile Milling (1)
    • RampingRamping (41)
    • Shoulder Ball NoseShoulder Ball Nose (11)
    • Shoulder MillingShoulder Milling (85)
    • Shoulder RoughingShoulder Roughing (24)
    • Shoulder Square EndShoulder Square End (90)
    • Slot Ball NoseSlot Ball Nose (11)
    • Slot MillingSlot Milling (40)
    • Slot Square EndSlot Square End (45)
    Cutting Diameter
    Cutting Diameter
    • 0.0394 in(2)
    • 0.0591 in(2)
    • 0.0787 in(3)
    • 0.079 in(1)
    • 0.0984 in(2)
    • 0.118 in(4)
    • 0.1181 in(3)
    • 0.125 in(2)
    • 0.1378 in(1)
    • 0.157 in(4)
    • 0.1575 in(4)
    • 0.1772 in(1)
    • 0.1875 in(2)
    • 0.1969 in(4)
    • 0.197 in(2)
    • 0.236 in(4)
    • 0.2362 in(7)
    • 0.25 in(8)
    • 0.3125 in(1)
    • 0.315 in(11)
    • 0.375 in(6)
    • 0.3937 in(6)
    • 0.394 in(4)
    • 0.472 in(4)
    • 0.4724 in(9)
    • 0.5 in(8)
    • 0.551 in(1)
    • 0.5512 in(2)
    • 0.625 in(3)
    • 0.6299 in(4)
    • 0.63 in(2)
    • 0.7087 in(1)
    • 0.75 in(9)
    • 0.7874 in(4)
    • 0.9843 in(1)
    • 1.0 in(5)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.0 mm(2)
    • 1.5 mm(2)
    • 2.0 mm(4)
    • 2.5 mm(2)
    • 3.0 mm(7)
    • 3.175 mm(2)
    • 3.5 mm(1)
    • 4.0 mm(8)
    • 4.5 mm(1)
    • 4.763 mm(2)
    • 5.0 mm(6)
    • 6.0 mm(11)
    • 6.35 mm(8)
    • 7.938 mm(1)
    • 8.0 mm(11)
    • 9.525 mm(6)
    • 10.0 mm(10)
    • 12.0 mm(13)
    • 12.7 mm(8)
    • 14.0 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(6)
    • 18.0 mm(1)
    • 19.05 mm(9)
    • 20.0 mm(4)
    • 25.0 mm(1)
    • 25.4 mm(5)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.0 mm(7)
    • 4.0 mm(3)
    • 5.0 mm(4)
    • 6.0 mm(1)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 9.0 mm(2)
    • 9.5 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(4)
    • 11.0 mm(3)
    • 12.0 mm(5)
    • 12.7 mm(5)
    • 13.0 mm(5)
    • 14.0 mm(4)
    • 15.0 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 19.0 mm(4)
    • 19.05 mm(3)
    • 20.0 mm(4)
    • 20.638 mm(1)
    • 22.0 mm(9)
    • 22.225 mm(3)
    • 25.0 mm(3)
    • 25.4 mm(2)
    • 26.0 mm(8)
    • 28.575 mm(2)
    • 30.0 mm(4)
    • 31.75 mm(5)
    • 32.0 mm(5)
    • 38.0 mm(3)
    • 38.1 mm(7)
    • 45.0 mm(1)
    • 50.8 mm(2)
    • 57.15 mm(5)
    • 76.2 mm(2)
    • 101.6 mm(1)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.118 in(1)
    • 0.1181 in(6)
    • 0.157 in(2)
    • 0.1575 in(1)
    • 0.1969 in(2)
    • 0.197 in(2)
    • 0.236 in(1)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.354 in(2)
    • 0.374 in(1)
    • 0.375 in(2)
    • 0.3937 in(2)
    • 0.394 in(2)
    • 0.433 in(2)
    • 0.4331 in(1)
    • 0.472 in(1)
    • 0.4724 in(4)
    • 0.5 in(5)
    • 0.5118 in(4)
    • 0.512 in(1)
    • 0.5512 in(4)
    • 0.5906 in(2)
    • 0.625 in(4)
    • 0.6299 in(3)
    • 0.63 in(1)
    • 0.748 in(4)
    • 0.75 in(3)
    • 0.7874 in(4)
    • 0.8125 in(1)
    • 0.866 in(4)
    • 0.8661 in(5)
    • 0.875 in(3)
    • 0.9843 in(3)
    • 1.0 in(2)
    • 1.0236 in(5)
    • 1.024 in(3)
    • 1.125 in(2)
    • 1.1811 in(4)
    • 1.25 in(5)
    • 1.2598 in(4)
    • 1.26 in(1)
    • 1.4961 in(3)
    • 1.5 in(7)
    • 1.7717 in(1)
    • 2.0 in(2)
    • 2.25 in(5)
    • 3.0 in(2)
    • 4.0 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 0.118 in(1)
    • 0.1181 in(6)
    • 0.157 in(2)
    • 0.1575 in(1)
    • 0.1969 in(2)
    • 0.197 in(2)
    • 0.236 in(1)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.354 in(2)
    • 0.374 in(1)
    • 0.375 in(2)
    • 0.3937 in(2)
    • 0.394 in(2)
    • 0.433 in(2)
    • 0.4331 in(1)
    • 0.472 in(1)
    • 0.4724 in(4)
    • 0.5 in(5)
    • 0.5118 in(4)
    • 0.512 in(1)
    • 0.5512 in(4)
    • 0.5906 in(2)
    • 0.625 in(4)
    • 0.6299 in(2)
    • 0.63 in(1)
    • 0.748 in(4)
    • 0.75 in(3)
    • 0.7874 in(3)
    • 0.8125 in(1)
    • 0.866 in(3)
    • 0.8661 in(4)
    • 0.875 in(3)
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.0236 in(5)
    • 1.024 in(3)
    • 1.125 in(2)
    • 1.1811 in(4)
    • 1.25 in(5)
    • 1.2598 in(4)
    • 1.26 in(1)
    • 1.378 in(2)
    • 1.4961 in(3)
    • 1.5 in(7)
    • 1.575 in(2)
    • 1.7717 in(1)
    • 1.969 in(1)
    • 2.0 in(2)
    • 2.25 in(5)
    • 3.0 in(2)
    • 4.0 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 3.0 mm(7)
    • 4.0 mm(3)
    • 5.0 mm(4)
    • 6.0 mm(1)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 9.0 mm(2)
    • 9.5 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(4)
    • 11.0 mm(3)
    • 12.0 mm(5)
    • 12.7 mm(5)
    • 13.0 mm(5)
    • 14.0 mm(4)
    • 15.0 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(3)
    • 19.0 mm(4)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 20.638 mm(1)
    • 22.0 mm(7)
    • 22.225 mm(3)
    • 25.0 mm(2)
    • 25.4 mm(2)
    • 26.0 mm(8)
    • 28.575 mm(2)
    • 30.0 mm(4)
    • 31.75 mm(5)
    • 32.0 mm(5)
    • 35.0 mm(2)
    • 38.0 mm(3)
    • 38.1 mm(7)
    • 40.0 mm(2)
    • 45.0 mm(1)
    • 50.0 mm(1)
    • 50.8 mm(2)
    • 57.15 mm(5)
    • 76.2 mm(2)
    • 101.6 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (123)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (80)
    • Weldon (46)
    Number of Flutes
    Number of Flutes
    • 2 (11)
    • 3 (49)
    • 4 (4)
    • 5 (16)
    • 6 (42)
    • 8 (4)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(2)
    • 1.9685 in(17)
    • 1.969 in(3)
    • 2.0 in(7)
    • 2.126 in(6)
    • 2.1654 in(3)
    • 2.244 in(7)
    • 2.2441 in(4)
    • 2.283 in(2)
    • 2.2835 in(2)
    • 2.48 in(2)
    • 2.4803 in(5)
    • 2.5 in(8)
    • 2.598 in(1)
    • 2.5984 in(1)
    • 2.8346 in(2)
    • 2.835 in(2)
    • 2.874 in(2)
    • 2.9921 in(5)
    • 3.0 in(6)
    • 3.2283 in(1)
    • 3.2677 in(8)
    • 3.268 in(4)
    • 3.5 in(3)
    • 3.5039 in(1)
    • 3.622 in(6)
    • 3.937 in(4)
    • 4.0 in(8)
    • 4.0945 in(3)
    • 4.5 in(2)
    • 4.7638 in(1)
    • 4.9213 in(1)
    • 5.0 in(5)
    • 5.25 in(1)
    • 5.5 in(1)
    • 6.5 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(2)
    • 50.0 mm(20)
    • 50.8 mm(7)
    • 54.0 mm(6)
    • 55.0 mm(3)
    • 57.0 mm(11)
    • 58.0 mm(4)
    • 63.0 mm(7)
    • 63.5 mm(8)
    • 66.0 mm(2)
    • 72.0 mm(4)
    • 73.0 mm(2)
    • 76.0 mm(5)
    • 76.2 mm(6)
    • 82.0 mm(1)
    • 83.0 mm(12)
    • 88.9 mm(3)
    • 89.0 mm(1)
    • 92.0 mm(6)
    • 100.0 mm(4)
    • 101.6 mm(8)
    • 104.0 mm(3)
    • 114.3 mm(2)
    • 121.0 mm(1)
    • 125.0 mm(1)
    • 127.0 mm(5)
    • 133.35 mm(1)
    • 139.7 mm(1)
    • 165.1 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Style
    Corner Style
    • BALL NOSE (11)
    • RADIUS (13)
    • SQUARE END (102)
    Corner Radius
    Corner Radius
    • 0.0 in(110)
    • 0.01 in(4)
    • 0.012 in(1)
    • 0.018 in(5)
    • 0.02 in(2)
    • 0.03 in(3)
    • 0.039 in(2)
    • 0.059 in(2)
    • 0.079 in(2)
    • 0.098 in(1)
    • 0.118 in(1)
    • 0.157 in(1)
    • 0.197 in(2)
    • 0.236 in(1)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(110)
    • 0.25 mm(4)
    • 0.3 mm(1)
    • 0.45 mm(5)
    • 0.5 mm(2)
    • 0.75 mm(3)
    • 1.0 mm(2)
    • 1.5 mm(2)
    • 2.0 mm(2)
    • 2.5 mm(1)
    • 3.0 mm(1)
    • 4.0 mm(1)
    • 5.0 mm(2)
    • 6.0 mm(1)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TIALN (41)
    • TIALN-LW (6)
    • TICN-CT (4)
    • UNCOATED (2)
    • WP15PE (84)
    Hand Of Tool
    Hand Of Tool
    • R (126)
    Rough Finish
    Rough Finish
    • F (100)
    • FR (26)
    • F-Finisher (11)
    Front-End
    Neck Diameter
    Neck Diameter
    • 0.222 in(1)
    • 0.296 in(1)
    • 0.37 in(1)
    • 0.374 in(1)
    • 0.444 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.64 mm(1)
    • 7.52 mm(1)
    • 9.4 mm(1)
    • 9.5 mm(1)
    • 11.28 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (126)
    Back-End Diameter
    Back-End Diameter
    • 3.175 mm(2)
    • 4.0 mm(9)
    • 4.763 mm(2)
    • 6.0 mm(35)
    • 6.35 mm(8)
    • 7.938 mm(1)
    • 8.0 mm(11)
    • 9.525 mm(6)
    • 10.0 mm(10)
    • 12.0 mm(13)
    • 12.7 mm(8)
    • 14.0 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(6)
    • 18.0 mm(1)
    • 19.05 mm(9)
    • 20.0 mm(4)
    • 25.0 mm(1)
    • 25.4 mm(5)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.125 in(2)
    • 0.1575 in(9)
    • 0.1875 in(2)
    • 0.2362 in(35)
    • 0.25 in(8)
    • 0.3125 in(1)
    • 0.315 in(11)
    • 0.375 in(6)
    • 0.3937 in(10)
    • 0.4724 in(13)
    • 0.5 in(8)
    • 0.5512 in(3)
    • 0.625 in(3)
    • 0.6299 in(6)
    • 0.7087 in(1)
    • 0.75 in(9)
    • 0.7874 in(4)
    • 0.9843 in(1)
    • 1.0 in(5)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)