eBore™ Universal
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
- M Stainless Steel (27)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
- K Cast Iron (23)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
- N Non-Ferrous Materials (23)
- N1Wrought Aluminum (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
- N3High-Silicon Aluminum Alloys Si >12.2%(23)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
- N6Carbon, Graphite Composites, CFRP (23)
- N7MMC's (23)
- S High-Temp Alloys (27)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
- H Hardened Materials (23)
- H1Hardened Materials 44-48 HRC(23)
- H2Hardened Materials 48-55 HRC(23)
- H3Hardened Materials 56-60 HRC(23)
- H4Hardened Materials >60 HRC(23)
- C CFRP Materials (23)
- C1CFRP, CFRP / CFRP (23)
- C2CFRP / Aluminium CFRP / Non-Ferrous (23)
Applications
Applications
Blind & Cross Hole Finishing (17)
Blind Hole Finishing (17)
Through & Cross Hole Finishing (17)
Through Hole Finishing (17)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (23)
- Lightly Interrupted Cut (27)
- Smooth Cut (27)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 91.0 (4)
- 92.0 (23)
to
Connection Style
Connection Style
- E-BORE Boring Bar (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (17)
- 2.0 (17)
- 3.0 (4)
- 4.0 (17)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.6514 in(2)
- 0.6709 in(1)
- 0.6711 in(2)
- 1.7714 in(1)
- 1.8894 in(1)
- 2.086 in(1)
- 2.0863 in(1)
- 2.1651 in(1)
- 2.2654 in(1)
- 2.2829 in(2)
- 2.4797 in(1)
- 2.6766 in(1)
- 2.6769 in(1)
- 2.8734 in(1)
- 3.0705 in(1)
- 3.2674 in(1)
- 3.6611 in(2)
- 3.8579 in(2)
- 4.4485 in(2)
- 4.8422 in(1)
- 5.6296 in(1)
to
Over All Length [L]
Over All Length [L]
- 16.5 mm(2)
- 17.0 mm(3)
- 44.993 mm(1)
- 47.992 mm(1)
- 52.985 mm(1)
- 52.993 mm(1)
- 54.993 mm(1)
- 57.5 mm(1)
- 57.985 mm(2)
- 62.985 mm(1)
- 67.985 mm(1)
- 67.993 mm(1)
- 72.985 mm(1)
- 77.992 mm(1)
- 82.992 mm(1)
- 92.991 mm(1)
- 92.992 mm(1)
- 97.992 mm(2)
- 112.992 mm(2)
- 122.992 mm(1)
- 142.992 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(23)
- 0.001 in(23)
- 0.002 in(23)
- 0.004 in(27)
- 0.008 in(23)
- 0.016 in(23)
- 0.031 in(23)
to
Corner Radius
Corner Radius
- 0.0 mm(23)
- 0.025 mm(23)
- 0.05 mm(23)
- 0.1 mm(27)
- 0.2 mm(23)
- 0.4 mm(23)
- 0.8 mm(23)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(6)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (23)
- K313 (23)
- KB1630 (23)
- KB5630 (23)
- KBH10 (23)
- KBH20 (23)
- KC5010 (23)
- KC5025 (23)
- KC5410 (23)
- KC730 (23)
- KC850 (23)
- KCK05 (23)
- KCK05B (23)
- KCK15 (23)
- KCK15B (23)
- KCK20 (23)
- KCK20B (23)
- KCM15B (23)
- KCM25 (23)
- KCM25B (23)
- KCM25S (23)
- KCM35 (23)
- KCP05 (23)
- KCP10 (23)
- KCP10B (23)
- KCP20S (23)
- KCP25 (23)
- KCP25B (23)
- KCP25C (23)
- KCP30 (23)
- KCS10 (23)
- KCS10B (23)
- KCS25S (23)
- KCU10 (27)
- KCU10B (23)
- KCU25 (23)
- KCU25B (23)
- KD1400 (23)
- KD1425 (23)
- KN10S (23)
- KT315 (23)
- KT325 (23)
- KTP10 (23)
- KTP25S (23)
- PB100 (23)
- THM (23)
- THM-X (23)
- TN10P (23)
- TN10U (23)
- TN15U (23)
- TN2000 (23)
- TN20K (23)
- TN20P (23)
- TN30M (23)
- TN4000 (23)
- TTR (23)
- TTS (23)
- WBH10U (23)
- WDN00U (23)
- WDN25U (23)
- WK15CT (23)
- WK20CT (23)
- WM15CT (23)
- WM25CT (23)
- WP15CT (23)
- WP20TT (23)
- WP25CT (23)
- WS10PT (23)
- WS25PT (23)
- WU05PT (23)
- WU10HT (23)
- WU10PR (4)
- WU10PT (23)
- WU25PT (23)
Hand Of Tool
Hand Of Tool
- R (21)
Wiper Insert
Wiper Insert
- N (21)
F Dimension
F Dimension
- 0.1504 mm(1)
- 2.821 mm(2)
- 3.821 mm(1)
- 4.749 mm(1)
- 4.769 mm(3)
- 5.761 mm(2)
- 5.769 mm(1)
- 6.762 mm(2)
- 6.769 mm(2)
- 7.319 mm(1)
- 7.762 mm(1)
- 7.769 mm(2)
- 9.763 mm(1)
- 12.265 mm(1)
to
F Dimension
F Dimension
- 0.1111 in(2)
- 0.1504 in(2)
- 0.187 in(1)
- 0.1878 in(3)
- 0.2268 in(2)
- 0.2271 in(1)
- 0.2662 in(2)
- 0.2665 in(2)
- 0.2881 in(1)
- 0.3056 in(1)
- 0.3059 in(2)
- 0.4829 in(1)
- 0.6844 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.0 mm(1)
- 6.0 mm(2)
- 8.0 mm(2)
- 10.0 mm(4)
- 12.0 mm(3)
- 14.0 mm(4)
- 15.0 mm(1)
- 16.0 mm(3)
- 20.0 mm(1)
- 25.0 mm(1)
- 29.0 mm(1)
- 40.0 mm(1)
- 52.0 mm(1)
- 68.0 mm(1)
- 76.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.08 in(1)
- 0.2362 in(1)
- 0.2363 in(1)
- 0.315 in(2)
- 0.3937 in(4)
- 0.4724 in(3)
- 0.5511 in(2)
- 0.5512 in(2)
- 0.5906 in(1)
- 0.6299 in(3)
- 0.7874 in(1)
- 0.9843 in(1)
- 1.1417 in(1)
- 1.5748 in(1)
- 2.0472 in(1)
- 2.6772 in(1)
- 2.9921 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.315 in(2)
- 0.3937 in(2)
- 0.472 in(2)
- 0.4724 in(2)
- 0.5511 in(2)
- 0.5512 in(1)
- 0.6299 in(4)
- 0.7874 in(4)
- 0.9843 in(1)
- 1.1811 in(1)
- 1.6142 in(1)
- 2.0866 in(1)
- 2.28 in(1)
- 3.0315 in(1)
- 4.0157 in(1)
- 5.9843 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 8.0 mm(2)
- 10.0 mm(2)
- 12.0 mm(4)
- 14.0 mm(3)
- 16.0 mm(4)
- 20.0 mm(4)
- 25.0 mm(1)
- 30.0 mm(1)
- 41.0 mm(1)
- 53.0 mm(1)
- 58.0 mm(1)
- 77.0 mm(1)
- 102.0 mm(1)
- 152.0 mm(1)
to
Cutting Direction
Cutting Direction
- E (21)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (21)
Maximum Bore Depth
Maximum Bore Depth
- 0.7871 in(1)
- 0.9052 in(1)
- 1.1021 in(1)
- 1.1043 in(1)
- 1.1808 in(1)
- 1.2986 in(1)
- 1.338 in(1)
- 1.5742 in(1)
- 1.6926 in(1)
- 1.6948 in(1)
- 1.9064 in(1)
- 2.165 in(1)
- 2.2766 in(1)
- 2.7556 in(2)
- 2.9524 in(2)
- 3.543 in(2)
- 3.9367 in(1)
- 4.7241 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 19.993 mm(1)
- 22.992 mm(1)
- 27.993 mm(1)
- 28.048 mm(1)
- 29.993 mm(1)
- 32.985 mm(1)
- 33.985 mm(1)
- 39.985 mm(1)
- 42.993 mm(1)
- 43.048 mm(1)
- 48.423 mm(1)
- 54.992 mm(1)
- 57.827 mm(1)
- 69.992 mm(2)
- 74.991 mm(1)
- 74.992 mm(1)
- 89.992 mm(2)
- 99.992 mm(1)
- 119.992 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (21)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (23)
- W-TRIGON 80 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1575 in(2)
- 0.1969 in(2)
- 0.236 in(2)
- 0.2362 in(2)
- 0.2756 in(3)
- 0.315 in(4)
- 0.3937 in(4)
- 0.4922 in(1)
- 0.5906 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 4.0 mm(2)
- 5.0 mm(2)
- 6.0 mm(4)
- 7.0 mm(3)
- 8.0 mm(4)
- 10.0 mm(4)
- 12.5 mm(1)
- 15.0 mm(1)
to
Gage Length
Gage Length
- 16.0000 in(3)
- 48.0000 in(1)
- 68.0000 in(1)
- 84.0000 in(1)
- 100.0000 in(1)
Gage Length
Gage Length
- 16.0000 mm(3)
- 48.0000 mm(1)
- 68.0000 mm(1)
- 84.0000 mm(1)
- 100.0000 mm(1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (23)
- B L (23)
- D P (23)
- H T (23)
- H W (23)
Back-End
System Size
System Size
- HSK63A (1)
- KM50TS (1)
Back-End Diameter
Back-End Diameter
- 16.0 mm(28)
- 50.0 mm(1)
- 63.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.6299 in(7)
- 1.9685 in(1)
- 2.4803 in(1)
to
No filters matching ""
