S-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
- M Stainless Steel (27)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
- K Cast Iron (27)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
- N Non-Ferrous Materials (27)
- N1Wrought Aluminum (27)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (27)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (27)
- N6Carbon, Graphite Composites, CFRP (27)
- N7MMC's (19)
- S High-Temp Alloys (27)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
- H Hardened Materials (22)
- H1Hardened Materials 44-48 HRC(22)
- H2Hardened Materials 48-55 HRC(22)
- H3Hardened Materials 56-60 HRC(16)
- H4Hardened Materials >60 HRC(14)
- C CFRP Materials (27)
- C1CFRP, CFRP / CFRP (27)
- C2CFRP / Aluminium CFRP / Non-Ferrous (19)
Applications
Applications
Facing (12)
Multiple Direction Cutting (21)
Profiling (20)
TRN Boring (12)
Turning (23)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (27)
- Lightly Interrupted Cut (27)
- Smooth Cut (27)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (3)
- 62.5 (1)
- 90.0 (9)
- 93.0 (8)
- 95.0 (2)
- 107.5 (4)
to
Connection Style
Connection Style
- KM (15)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (17)
- 2.0 (15)
- 3.0 (4)
- 4.0 (5)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.575 in(24)
- 1.772 in(1)
- 1.85 in(2)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(24)
- 45.0 mm(1)
- 47.0 mm(2)
to
Corner Radius
Corner Radius
- 0.0 in(6)
- 0.001 in(6)
- 0.002 in(8)
- 0.004 in(10)
- 0.008 in(14)
- 0.016 in(22)
- 0.031 in(22)
- 0.047 in(22)
- 0.063 in(5)
- 0.157 in(1)
- 0.197 in(2)
- 0.237 in(2)
to
Corner Radius
Corner Radius
- 0.0 mm(6)
- 0.025 mm(6)
- 0.05 mm(8)
- 0.1 mm(10)
- 0.2 mm(14)
- 0.4 mm(22)
- 0.8 mm(22)
- 1.201 mm(22)
- 1.6 mm(5)
- 4.0 mm(1)
- 5.0 mm(2)
- 6.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (2)
- K313 (19)
- K68 (3)
- KB1345 (8)
- KB1630 (2)
- KB5610 (10)
- KB5630 (8)
- KBH10 (8)
- KBH20 (14)
- KC5010 (27)
- KC5025 (24)
- KC5410 (19)
- KC730 (22)
- KC850 (27)
- KCK05 (17)
- KCK05B (12)
- KCK15 (19)
- KCK15B (19)
- KCK20 (24)
- KCK20B (22)
- KCM15 (14)
- KCM15B (10)
- KCM25 (27)
- KCM25B (19)
- KCM25S (6)
- KCM35 (17)
- KCP05 (13)
- KCP05B (2)
- KCP10 (22)
- KCP10B (24)
- KCP15 (2)
- KCP20S (6)
- KCP25 (22)
- KCP25B (25)
- KCP25C (27)
- KCP30 (21)
- KCP30B (2)
- KCP40B (2)
- KCPK05 (2)
- KCS10 (27)
- KCS10B (22)
- KCS25S (6)
- KCU10 (24)
- KCU10B (27)
- KCU25 (19)
- KCU25B (27)
- KD1400 (12)
- KD1405 (2)
- KD1425 (8)
- KN10S (6)
- KT315 (17)
- KT325 (12)
- KTP10 (12)
- KTP25S (17)
- KY1615 (2)
- PB250 (2)
- THM (27)
- THM-X (8)
- TN10P (12)
- TN10U (14)
- TN15M (8)
- TN15U (2)
- TN2000 (10)
- TN20K (17)
- TN20P (22)
- TN30M (15)
- TN4000 (5)
- TN6010 (6)
- TN6025 (6)
- TTM09 (3)
- TTR (9)
- WBH10P (8)
- WBH20P (12)
- WBH30P (8)
- WBK45U (2)
- WDN25U (12)
- WK05CT (5)
- WK15CT (17)
- WK20CT (27)
- WM15CT (12)
- WM25CT (22)
- WP15CT (27)
- WP20TT (6)
- WP25CT (27)
- WP35CT (9)
- WS10PT (17)
- WS25PT (15)
- WU05PT (13)
- WU10HT (16)
- WU10PT (17)
- WU25PT (17)
Hand Of Tool
Hand Of Tool
- L (5)
- N (4)
- R (6)
Wiper Insert
Wiper Insert
- N (27)
- Y (6)
F Dimension
F Dimension
- 0.0 mm(2)
- 4.0 mm(1)
- 5.0 mm(1)
- 27.0 mm(11)
to
F Dimension
F Dimension
- 0.0 in(2)
- 0.157 in(1)
- 0.197 in(1)
- 1.063 in(11)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 50.0 mm(12)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.969 in(12)
to
Cutting Direction
Cutting Direction
- B (7)
- S (8)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (15)
Maximum Bore Depth
Maximum Bore Depth
- 1.575 in(12)
to
Maximum Bore Depth
Maximum Bore Depth
- 40.0 mm(12)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- D-DIAMOND/RHOMBIC 55 (11)
- R-ROUND (5)
- S-SQUARE 90 (3)
- T-TRIANGLE 60 (4)
- V-DIAMOND/RHOMBIC 35 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.63 in(1)
- 0.787 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 16.0 mm(1)
- 20.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (14)
- B L (14)
- C A (2)
- D P (12)
- H T (17)
- H W (27)
Back-End
Connection Type
Connection Type
- TAPER SHANK (15)
System Size
System Size
- KM40TS (15)
No filters matching ""
