Produit similaire à:
VXF™-07 • Fraises à queue cylindrique • Métrique
Fraises à queue cylindrique • Métrique
Numéro de matériel6597155
Ref. ISO CatalogueVXF018Z02A18XP07L180Ref. ANSI CatalogueVXF018Z02A18XP07L180
- P Acier
- M Acier inoxydable
- K Fonte
- N Non ferreux
- S Alliages hautes températures
- H Matériaux trempés
- 100018357
- Spiral Circular
- Fraisage hélicoïdal
- Ramping : Ébauche
- Queue — Cylindrique Classique
- Counter Boring
- Usinage de poches
- Fraisage en plongée
- Inclined Square End Mill
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Aperçu
- Données d'application
- Téléchargements
- Pièces compatibles côté machine
- Pièces compatibles côté pièce
- Pièces de rechange
- Révision
- FAQ
Numéro de matériel | 6597155 |
Ref. ISO Catalogue | VXF018Z02A18XP07L180 |
Ref. ANSI Catalogue | VXF018Z02A18XP07L180 |
[D1MAX] Diamètre de coupe maximal | 18 mm |
[D1MAX] Diamètre de coupe maximal | .7087 in |
[D1] Diamètre effectif de coupe | 8.952 mm |
[D1] Diamètre effectif de coupe | .3524 in |
[D] Adaptateur / Queue / Diamètre d’alésage | 18 mm |
[D] Adaptateur / Queue / Diamètre d’alésage | .7087 in |
[L] Longueur totale | 180 mm |
[L] Longueur totale | 7.086 in |
[L2] Longueur de tête | 25 mm |
[L2] Longueur de tête | .9843 in |
[AP1MAX] 1re profondeur de coupe maximale | 0.9 mm |
[AP1MAX] 1re profondeur de coupe maximale | .0354 in |
Nombre de plaquettes | 2 |
Angle de ramping maximum | 5.4 |
T/Min max | 61000 |
Alimentation en arrosage | Y |
Poids en kilogrammes | 0.31 |
Matériaux de pièce à usiner
- Acier
- Acier inoxydable
- Fonte
- Non ferreux
- Alliages hautes températures
- Matériaux trempés
Uses and application
- 100018357
- Spiral Circular
- Fraisage hélicoïdal
- Ramping : Ébauche
- Queue — Cylindrique Classique
- Counter Boring
- Usinage de poches
- Fraisage en plongée
- Inclined Square End Mill
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
Guide de sélection des plaquettes
Light | General | Heavy | ||||
Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | XPPT-MM | WP25PM | XPPT-MM | WS40PM | XPPW-MH | WP40PM |
P3–P4 | XPPT-MM | WP25PM | XPPT-MM | WS40PM | XPPW-MH | WP40PM |
P5–P6 | XPPT-MM | WP25PM | XPPT-MM | WS40PM | XPPW-MH | WP40PM |
M1–M2 | XPPT-MM | WS40PM | XPPT-MM | WS40PM | XPPW-MH | WP40PM |
M3 | XPPT-MM | WS40PM | XPPT-MM | WS40PM | XPPW-MH | WP40PM |
K1–K2 | XPPW-MH | WU10PM | XPPW-MH | WU10PM | XPPW-MH | WU10PM |
K3 | XPPW-MH | WU10PM | XPPW-MH | WU10PM | XPPW-MH | WU10PM |
S1–S2 | XPPT-MM | WP25PM | XPPT-MM | WS40PM | – | – |
S3 | XPPT-MM | WS40PM | XPPT-MM | WS40PM | – | – |
S4 | XPPT-MM | WS40PM | XPPT-MM | WS40PM | – | – |
H1 | XPPW-MH | WU10PM | XPPW-MH | WU10PM | – | – |
Feeds
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
.E..MM | 0,46 | 1,32 | 2,43 | 0,32 | 0,89 | 1,53 | 0,24 | 0,65 | 1,09 | 0,21 | 0,56 | 0,94 | 0,19 | 0,52 | 0,85 | .E..MM |
.S..MH | 0,84 | 1,84 | 3,12 | 0,59 | 1,21 | 1,85 | 0,43 | 0,87 | 1,30 | 0,38 | 0,75 | 1,12 | 0,34 | 0,69 | 1,02 | .S..MH |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
.E..MM | 0,42 | 1,21 | 2,20 | 0,30 | 0,83 | 1,41 | 0,22 | 0,60 | 1,01 | 0,19 | 0,52 | 0,87 | 0,18 | 0,48 | 0,79 | .E..MM |
.S..MH | 0,78 | 1,68 | 2,79 | 0,55 | 1,12 | 1,71 | 0,40 | 0,81 | 1,21 | 0,35 | 0,70 | 1,04 | 0,32 | 0,64 | 0,94 | .S..MH |
Light | General | Heavy |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | 0,37 | 1,06 | 1,89 | 0,27 | 0,73 | 1,24 | 0,20 | 0,53 | 0,89 | 0,17 | 0,46 | 0,77 | 0,16 | 0,42 | 0,70 | .E..MM |
.S..MH | 0,68 | 1,46 | 2,35 | 0,48 | 0,98 | 1,49 | 0,36 | 0,71 | 1,07 | 0,31 | 0,62 | 0,92 | 0,28 | 0,56 | 0,84 | .S..MH |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | .020 | .058 | .109 | .014 | .039 | .067 | .010 | .028 | .047 | .009 | .025 | .041 | .008 | .022 | .037 | .E..MM |
.S..MH | .036 | .080 | .141 | .025 | .052 | .080 | .019 | .037 | .056 | .016 | .032 | .048 | .015 | .029 | .043 | .S..MH |
Light | General | Heavy |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | .018 | .051 | .094 | .013 | .035 | .059 | .009 | .025 | .042 | .008 | .022 | .037 | .007 | .020 | .033 | .E..MM |
.S..MH | .032 | .070 | .118 | .023 | .046 | .071 | .017 | .033 | .050 | .014 | .029 | .043 | .013 | .026 | .039 | .S..MH |
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..MM | .015 | .043 | .076 | .011 | .029 | .050 | .008 | .022 | .036 | .007 | .019 | .031 | .006 | .017 | .028 | .E..MM |
.S..MH | .027 | .058 | .093 | .019 | .039 | .059 | .014 | .028 | .042 | .012 | .024 | .036 | .011 | .022 | .033 | .S..MH |
Speeds
Vitesses de départ recommandées [m/mn]*
Material Group | WP25PM | WP40PM | WS40PM | WU10PM | |||||||||
P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – | – | – | – |
2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | – | – | – | |
3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | – | – | – | |
4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | – | – | – | |
5 | 220 | 205 | 180 | 205 | 185 | 160 | 205 | 175 | 145 | – | – | – | |
6 | 200 | 150 | 120 | 180 | 140 | 110 | 180 | 130 | 95 | – | – | – | |
M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 250 | 205 | 170 | – | – | – |
2 | 220 | 190 | 155 | 210 | 180 | 150 | 215 | 175 | 145 | – | – | – | |
3 | 170 | 145 | 115 | 155 | 140 | 110 | 175 | 130 | 100 | – | – | – | |
K | 1 | 275 | 245 | 220 | – | – | – | – | – | – | 355 | 320 | 290 |
2 | 215 | 190 | 180 | – | – | – | – | – | – | 275 | 245 | 230 | |
3 | 180 | 160 | 145 | – | – | – | – | – | – | 235 | 210 | 190 | |
S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 | – | – | – |
2 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 | – | – | – | |
3 | 60 | 50 | 30 | 60 | 50 | 35 | 60 | 50 | 30 | – | – | – | |
4 | 85 | 60 | 40 | 80 | 60 | 40 | 70 | 60 | 35 | – | – | – | |
H | 1 | 145 | 110 | 85 | – | – | – | – | – | – | 190 | 155 | 110 |
Recommended Starting Speeds [SFM]*
Material Group | WP25PM | WP40PM | WS40PM | WU10PM | |||||||||
P | 1 | 1295 | 1115 | 1065 | 1165 | 1015 | 970 | 1085 | 920 | 785 | – | – | – |
2 | 1085 | 950 | 785 | 985 | 855 | 705 | 900 | 805 | 605 | – | – | – | |
3 | 1000 | 855 | 690 | 900 | 770 | 625 | 835 | 705 | 540 | – | – | – | |
4 | 885 | 720 | 590 | 805 | 675 | 525 | 755 | 625 | 490 | – | – | – | |
5 | 720 | 675 | 590 | 675 | 605 | 525 | 675 | 575 | 475 | – | – | – | |
6 | 655 | 490 | 395 | 590 | 460 | 360 | 590 | 425 | 310 | – | – | – | |
M | 1 | 805 | 705 | 655 | 770 | 675 | 605 | 820 | 675 | 560 | – | – | – |
2 | 720 | 625 | 510 | 690 | 590 | 490 | 705 | 575 | 475 | – | – | – | |
3 | 560 | 475 | 375 | 510 | 460 | 360 | 575 | 425 | 330 | – | – | – | |
K | 1 | 900 | 805 | 720 | – | – | – | – | – | – | 1165 | 1050 | 950 |
2 | 705 | 625 | 590 | – | – | – | – | – | – | 900 | 805 | 755 | |
3 | 590 | 525 | 475 | – | – | – | – | – | – | 770 | 690 | 625 | |
S | 1 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 | – | – | – |
2 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 | – | – | – | |
3 | 195 | 165 | 100 | 195 | 165 | 115 | 195 | 165 | 100 | – | – | – | |
4 | 280 | 195 | 130 | 260 | 195 | 130 | 230 | 195 | 115 | – | – | – | |
H | 1 | 475 | 360 | 280 | – | – | – | – | – | – | 625 | 510 | 360 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use