Surfaçage
Fraisage hélicoïdal
Ramping : Ébauche
Rainurage : Bout plat
Fraisage de côté/avec épaulement : Bout plat
Queue — Cylindrique Classique
Fraisage — Arrosage interne
Usinage de pochesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5416634 |
| Ref. ISO Catalogue | VSM11D020Z02A20XD11L110 |
| Ref. ANSI Catalogue | VSM11D020Z02A20XD11L110 |
| [D1] Diamètre effectif de coupe | 20 mm |
| [D1] Diamètre effectif de coupe | .78 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 20 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .79 in |
| [L] Longueur totale | 110 mm |
| [L] Longueur totale | 4.331 in |
| [L2] Longueur de tête | 31 mm |
| [L2] Longueur de tête | 1.22 in |
| [AP1MAX] 1re profondeur de coupe maximale | 11.55 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .455 in |
| Nombre de plaquettes | 2 |
| Angle de ramping maximum | 7.8 |
| T/Min max | 35100 |
| Alimentation en arrosage | Y |
| Poids en kilogrammes | 0.22 |
SurfaçageFraisage hélicoïdalRamping : ÉbaucheRainurage : Bout platFraisage de côté/avec épaulement : Bout platQueue — Cylindrique ClassiqueFraisage — Arrosage interneUsinage de pochesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Material | Light | General | Universal | Heavy | ||||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | XDCT-ML | WP40PM | XDPT-MM | WP40PM | XD..-MU | WU20PM | XDPT-MH | WP40PM |
| P3–P4 | XDCT-ML | WP40PM | XDPT-MM | WP40PM | XD..-MU | WU20PM | XDPT-MH | WP40PM |
| P5–P6 | XDPT-MM | WP25PM | XDPT-MM | WP35CM | XD..-MU | WU20PM | XDPT-MH | WP40PM |
| M1–M2 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MH | WS40PM |
| M3 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MH | WS40PM |
| K1–K2 | XDCT-ML | WK15CM | XDPT-MM | WK15CM | XD..-MU | WU20PM | XDPT-MH | WK15CM |
| K3 | XDCT-ML | WP35CM | XDPT-MM | WP35CM | XD..-MU | WU20PM | XDPT-MH | WP35CM |
| N1–N2 | XDCT-ALP | WN10HM | XDCT-ALP | WN25PM | – | – | XDCT-ALP | WN25PM |
| N3 | XDCW-PCD | WDN10U | XDCW-PCD | WDN10U | – | – | XDCW-PCD | WDN10U |
| S1–S2 | XDCT-ML | WP25PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MH | WS40PM |
| S3 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MH | WS40PM |
| S4 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MH | WS40PM |
| H1 | XDCT-ML | WP25PM | XDPT-MM | WP25PM | XD..-MU | WU20PM | XDPT-MU | WU20PM |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..PCD | 0,12 | 0,18 | 0,29 | 0,08 | 0,13 | 0,21 | 0,06 | 0,10 | 0,16 | 0,06 | 0,09 | 0,14 | 0,05 | 0,08 | 0,12 | .F..PCD |
| .F..ALP | 0,12 | 0,22 | 0,31 | 0,08 | 0,16 | 0,23 | 0,06 | 0,12 | 0,17 | 0,06 | 0,10 | 0,15 | 0,05 | 0,10 | 0,14 | .F..ALP |
| .E..ML | 0,17 | 0,27 | 0,36 | 0,13 | 0,20 | 0,26 | 0,10 | 0,15 | 0,19 | 0,08 | 0,13 | 0,17 | 0,08 | 0,12 | 0,16 | .E..ML |
| .S..MM/.S..MU | 0,23 | 0,32 | 0,47 | 0,17 | 0,23 | 0,34 | 0,13 | 0,17 | 0,25 | 0,11 | 0,15 | 0,22 | 0,10 | 0,14 | 0,20 | .S..MM/.S..MU |
| .S..MH | 0,23 | 0,37 | 0,56 | 0,17 | 0,27 | 0,40 | 0,13 | 0,20 | 0,30 | 0,11 | 0,17 | 0,26 | 0,10 | 0,16 | 0,24 | .S..MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40-100% | ||||||||||||
| .F..PCD | .005 | .007 | .011 | .003 | .005 | .008 | .003 | .004 | .006 | .002 | .003 | .005 | .002 | .003 | .005 | .F..PCD |
| .F..ALP | .005 | .009 | .013 | .003 | .006 | .009 | .003 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .005 | .F..ALP |
| .E..ML | .007 | .011 | .014 | .005 | .008 | .010 | .004 | .006 | .008 | .003 | .005 | .007 | .003 | .005 | .006 | .E..ML |
| .S..MM/.S..MU | .009 | .013 | .019 | .007 | .009 | .013 | .005 | .007 | .010 | .004 | .006 | .009 | .004 | .006 | .008 | .S..MM/.S..MU |
| .S..MH | .009 | .014 | .022 | .007 | .010 | .016 | .005 | .008 | .012 | .004 | .007 | .010 | .004 | .006 | .009 | .S..MH |
| Light | General | Heavy |
| Material Group | WDN10U | WK15CM | WK15PM | WN10HM | WN25PM | WP25PM | |||||||||||||
| P | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 330 | 285 | 270 |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 275 | 240 | 200 | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 255 | 215 | 175 | |
| 4 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 225 | 185 | 150 | |
| 5 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 185 | 170 | 150 | |
| 6 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 165 | 125 | 100 | |
| M | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 205 | 180 | 165 |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 185 | 160 | 130 | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 140 | 120 | 95 | |
| K | 1 | — | — | — | 420 | 385 | 340 | 270 | 245 | 215 | — | — | — | — | — | — | 230 | 205 | 185 |
| 2 | — | — | — | 335 | 295 | 275 | 210 | 190 | 175 | — | — | — | — | — | — | 180 | 160 | 150 | |
| 3 | — | — | — | 280 | 250 | 230 | 175 | 160 | 145 | — | — | — | — | — | — | 150 | 135 | 120 | |
| N | 1 | 4010 | 3505 | 2990 | — | — | — | — | — | — | 795 | 695 | 600 | 1075 | 945 | 875 | — | — | — |
| 2 | 1600 | 1495 | 1400 | — | — | — | — | — | — | 795 | 695 | 600 | 945 | 875 | 760 | — | — | — | |
| 3 | 1600 | 1495 | 1400 | — | — | — | — | — | — | 560 | 485 | 420 | 945 | 875 | 760 | — | — | — | |
| S | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 40 | 35 | 25 |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 40 | 35 | 25 | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 50 | 40 | 25 | |
| 4 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 70 | 50 | 35 | |
| H | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 120 | 90 | 70 |
| Material Group | WP35CM | WP40PM | WS30PM | WS40PM | WU20PM | WU35PM | |||||||||||||
| P | 1 | 455 | 395 | 370 | 295 | 260 | 245 | — | — | — | — | — | — | 330 | 290 | 270 | 260 | 230 | 215 |
| 2 | 280 | 255 | 230 | 250 | 215 | 180 | — | — | — | — | — | — | 275 | 250 | 200 | 220 | 190 | 160 | |
| 3 | 255 | 230 | 205 | 230 | 195 | 160 | — | — | — | — | — | — | 255 | 220 | 175 | 200 | 170 | 140 | |
| 4 | 190 | 175 | 160 | 205 | 170 | 135 | — | — | — | — | — | — | 225 | 190 | 150 | 180 | 150 | 120 | |
| 5 | 260 | 230 | 210 | 170 | 155 | 135 | — | — | — | 170 | 145 | 120 | 185 | 175 | 150 | 150 | 135 | 120 | |
| 6 | 160 | 135 | 110 | 150 | 115 | 90 | — | — | — | 150 | 110 | 80 | 165 | 130 | 100 | 130 | 100 | 80 | |
| M | 1 | 205 | 185 | 155 | 195 | 170 | 155 | 225 | 200 | 185 | 210 | 170 | 140 | 205 | 180 | 165 | 170 | 150 | 135 |
| 2 | 185 | 160 | 140 | 175 | 150 | 125 | 205 | 180 | 145 | 180 | 145 | 120 | 185 | 160 | 130 | 155 | 130 | 110 | |
| 3 | 145 | 130 | 115 | 130 | 115 | 90 | 155 | 135 | 105 | 145 | 110 | 85 | 140 | 120 | 95 | 115 | 100 | 80 | |
| K | 1 | 295 | 265 | 240 | — | — | — | — | — | — | — | — | — | 250 | 220 | 185 | — | — | — |
| 2 | 235 | 210 | 190 | — | — | — | — | — | — | — | — | — | 200 | 180 | 150 | — | — | — | |
| 3 | 195 | 175 | 160 | — | — | — | — | — | — | — | — | — | 180 | 150 | 120 | — | — | — | |
| N | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 550 | 470 | 400 | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | 550 | 470 | 400 | — | — | — | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | 400 | 350 | 300 | — | — | — | |
| S | 1 | — | — | — | — | — | — | 45 | 40 | 30 | 40 | 35 | 25 | 40 | 35 | 25 | 35 | 30 | 25 |
| 2 | — | — | — | — | — | — | 45 | 40 | 30 | 40 | 35 | 25 | 40 | 35 | 25 | 35 | 30 | 25 | |
| 3 | — | — | — | — | — | — | 55 | 45 | 30 | 50 | 40 | 25 | 50 | 40 | 25 | 45 | 35 | 25 | |
| 4 | — | — | — | — | — | — | 70 | 60 | 40 | 60 | 50 | 30 | 70 | 50 | 35 | 60 | 45 | 30 | |
| H | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 110 | 80 | 70 | — | — | — |
| Material Group | WDN10U | WK15CM | WK15PM | WN10HM | WN25PM | WP25PM | |||||||||||||
| P | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1085 | 935 | 885 |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 900 | 785 | 655 | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 835 | 705 | 575 | |
| 4 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 740 | 605 | 490 | |
| 5 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 605 | 560 | 490 | |
| 6 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 540 | 410 | 330 | |
| M | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 675 | 590 | 540 |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 605 | 525 | 425 | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 460 | 395 | 310 | |
| K | 1 | — | — | — | 1380 | 1265 | 1115 | 885 | 805 | 705 | — | — | — | — | — | — | 755 | 675 | 605 |
| 2 | — | — | — | 1100 | 970 | 900 | 690 | 625 | 575 | — | — | — | — | — | — | 590 | 525 | 490 | |
| 3 | — | — | — | 920 | 820 | 755 | 575 | 525 | 475 | — | — | — | — | — | — | 490 | 445 | 395 | |
| N | 1 | 13155 | 11500 | 9810 | — | — | — | — | — | — | 2605 | 2275 | 1965 | 3525 | 3100 | 2870 | — | — | — |
| 2 | 5250 | 4905 | 4595 | — | — | — | — | — | — | 2605 | 2275 | 1965 | 3100 | 2870 | 2495 | — | — | — | |
| 3 | 5250 | 4905 | 4595 | — | — | — | — | — | — | 1835 | 1590 | 1375 | 3100 | 2870 | 2495 | — | — | — | |
| S | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 130 | 115 | 80 |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 130 | 115 | 80 | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 165 | 130 | 80 | |
| 4 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 230 | 165 | 115 | |
| H | 1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 395 | 295 | 230 |
| Material Group | WP35CM | WP40PM | WS30PM | WS40PM | WU20PM | WU35PM | |||||||||||||
| P | 1 | 1495 | 1295 | 1215 | 970 | 855 | 805 | — | — | — | — | — | — | 1080 | 950 | 885 | 855 | 755 | 705 |
| 2 | 920 | 835 | 755 | 820 | 705 | 590 | — | — | — | — | — | — | 900 | 820 | 655 | 720 | 625 | 525 | |
| 3 | 835 | 755 | 675 | 755 | 640 | 525 | — | — | — | — | — | — | 835 | 720 | 570 | 655 | 560 | 460 | |
| 4 | 625 | 575 | 525 | 675 | 560 | 445 | — | — | — | — | — | — | 735 | 620 | 490 | 590 | 490 | 395 | |
| 5 | 855 | 755 | 690 | 560 | 510 | 445 | — | — | — | 560 | 475 | 395 | 605 | 570 | 490 | 490 | 445 | 395 | |
| 6 | 525 | 445 | 360 | 490 | 375 | 295 | — | — | — | 490 | 360 | 260 | 540 | 425 | 325 | 425 | 330 | 260 | |
| M | 1 | 675 | 605 | 510 | 640 | 560 | 510 | 740 | 655 | 605 | 690 | 560 | 460 | 670 | 590 | 540 | 560 | 490 | 445 |
| 2 | 605 | 525 | 460 | 575 | 490 | 410 | 675 | 590 | 475 | 590 | 475 | 395 | 605 | 520 | 425 | 510 | 425 | 360 | |
| 3 | 475 | 425 | 375 | 425 | 375 | 295 | 510 | 445 | 345 | 475 | 360 | 280 | 455 | 390 | 310 | 375 | 330 | 260 | |
| K | 1 | 970 | 870 | 785 | — | — | — | — | — | — | — | — | — | 820 | 720 | 605 | — | — | — |
| 2 | 770 | 690 | 625 | — | — | — | — | — | — | — | — | — | 655 | 590 | 490 | — | — | — | |
| 3 | 640 | 575 | 525 | — | — | — | — | — | — | — | — | — | 590 | 490 | 390 | — | — | — | |
| N | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 1800 | 1540 | 1310 | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — | — | — | — | 1800 | 1540 | 1310 | — | — | — | |
| 3 | — | — | — | — | — | — | — | — | — | — | — | — | 1310 | 1145 | 980 | — | — | — | |
| S | 1 | — | — | — | — | — | — | 150 | 130 | 100 | 130 | 115 | 80 | 130 | 110 | 80 | 115 | 100 | 80 |
| 2 | — | — | — | — | — | — | 150 | 130 | 100 | 130 | 115 | 80 | 130 | 110 | 80 | 115 | 100 | 80 | |
| 3 | — | — | — | — | — | — | 180 | 150 | 100 | 165 | 130 | 80 | 160 | 130 | 80 | 150 | 115 | 80 | |
| 4 | — | — | — | — | — | — | 230 | 195 | 130 | 195 | 165 | 100 | 225 | 160 | 110 | 195 | 150 | 100 | |
| H | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 360 | 260 | 225 | — | — | — |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?