100029626
100029627
Trochoidal Milling
Schräg-Eintauchfräsen 3°
Nutenfräsen: Ebene Stirnfläche
Side Milling/Shoulder Milling: Square End
Spiralwinkel: 38°
Werkzeugabmessungen: Schneidreihen: 5 Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Nummer | 6071688 |
| ISO Katalog Nummer | 5VCE19EDL20 |
| ANSI Katalog Nummer | 5VCE19EDL20 |
| Sorte | WS15PE |
| Aufnahmeart Maschinenseite | DUO-LOCK |
| [D] Adapter/Schaft/Bohrungsdurchmesser | 25.4 mm |
| [D] Adapter/Schaft/Bohrungsdurchmesser | 1 in |
| [L1] Messlänge | 42.9 mm |
| [L1] Messlänge | 1.689 in |
| [CSMS] Systemgröße – Maschinenseite | DL20 |
| [WF] Flächenbreite | 16 mm |
| [WF] Flächenbreite | .6299 in |
| [Re] Eckenradius | 3.048 mm |
| [Re] Eckenradius | .12 in |
| [Z] Anzahl der Spannuten | 5 |
| [D1] Effektiver Schneidendurchmesser | 19.05 mm |
| [D1] Effektiver Schneidendurchmesser | .75 in |
| [AP1MAX] 1. maximale Schnitttiefe | 28.575 mm |
| [AP1MAX] 1. maximale Schnitttiefe | 1.125 in |
100029626100029627Trochoidal MillingSchräg-Eintauchfräsen 3°Nutenfräsen: Ebene StirnflächeSide Milling/Shoulder Milling: Square EndSpiralwinkel: 38°Werkzeugabmessungen: Schneidreihen: 5 Grades
WS15PE
PVD-beschichtete Hartmetallsorte mit optimierter Zusammensetzung und ein optimierter Prozess bieten höhere Verschleißfestigkeit. Dem neuesten Stand der Technik entsprechende Beschichtungs-Nachbehandlung sorgt für reduzierte Reibung und ein verbessertes Wärmemanagement bei der spanhebenden Bearbeitung von Superlegierungen.
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
 |  |  | ||||||||||||||||||
| Eckfräsen (A) und Nutfräsen (B) | kurz | mittel | lang | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||
| A | B | Auskraglänge der | D1 | |||||||||||||||||
| A | B | WP15PE | WP15PE | WP15PE | ||||||||||||||||
| Schnittgeschwindigkeit | Schnittgeschwindigkeit | Schnittgeschwindigkeit | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
| Werkstoffgruppe | ap | ae | ap | Min. | Max. | Min. | Max. | Min. | Max. | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | 1.2500 | ||||
| P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
| 1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 | |
| 4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0033 | .0034 | |
| 5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | 170 | – | 281 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | 136 | – | 213 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 490 | 351 | – | 441 | 351 | – | 441 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 460 | 324 | – | 414 | 324 | – | 414 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 430 | 324 | – | 387 | 324 | – | 387 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0021 | .0022 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 120 | – | 156 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0028 | .0030 | |
| H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0033 | .0034 |
| 2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| | | ||||||||||||||||||
| Eckfräsen (A) und Nutfräsen (B) | kurz | mittel | lang | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||
| A | B | Auskraglänge der | D1 | |||||||||||||||||
| WS15PE | WS15PE | WS15PE | ||||||||||||||||||
| Schnittgeschwindigkeit | Schnittgeschwindigkeit | Schnittgeschwindigkeit | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
| Werkstoffgruppe | ap | ae | ap | Min. | Max. | Min. | Max. | Min. | Max. | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | 1.2500 | ||||
| P | 5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | 170 | – | 281 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 |
| 6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | 136 | – | 213 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0021 | .0022 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 120 | – | 156 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0028 | .0030 | |
| H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0033 | .0034 |
| 2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO Katalog
ANSI Katalog
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?