D-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (37)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(37)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(37)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(37)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(37)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(37)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(37)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(37)
- M Stainless Steel (37)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(37)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(37)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(37)
- K Cast Iron (37)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(37)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(37)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(37)
- N Non-Ferrous Materials (37)
- N1Wrought Aluminum (37)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(37)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (37)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (37)
- N6Carbon, Graphite Composites, CFRP (37)
- N7MMC's (35)
- S High-Temp Alloys (37)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(37)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(37)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(37)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(37)
- H Hardened Materials (37)
- H1Hardened Materials 44-48 HRC(37)
- H2Hardened Materials 48-55 HRC(37)
- H3Hardened Materials 56-60 HRC(30)
- H4Hardened Materials >60 HRC(26)
- C CFRP Materials (37)
- C1CFRP, CFRP / CFRP (37)
- C2CFRP / Aluminium CFRP / Non-Ferrous (35)
Applications
Applications
Facing (37)
ID Facing (25)
Multiple Direction Cutting (37)
Profiling (3)
TRN Boring (25)
Turning (37)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (37)
- Lightly Interrupted Cut (37)
- Smooth Cut (37)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (5)
- 62.5 (2)
- 72.5 (1)
- 75.0 (8)
- 93.0 (9)
- 95.0 (8)
- 107.5 (4)
to
Connection Style
Connection Style
- PSC (12)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (21)
- 2.0 (28)
- 3.0 (2)
- 4.0 (35)
- 6.0 (2)
- 8.0 (19)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.047 in(2)
- 2.126 in(1)
- 2.205 in(1)
- 2.559 in(32)
- 2.757 in(1)
to
Over All Length [L]
Over All Length [L]
- 52.0 mm(2)
- 54.0 mm(1)
- 56.0 mm(1)
- 65.0 mm(32)
- 70.0 mm(1)
to
Corner Radius
Corner Radius
- 0.004 in(21)
- 0.008 in(17)
- 0.014 in(5)
- 0.016 in(27)
- 0.024 in(2)
- 0.031 in(37)
- 0.047 in(37)
- 0.063 in(33)
- 0.094 in(4)
- 0.095 in(13)
- 0.157 in(5)
to
Corner Radius
Corner Radius
- 0.1 mm(21)
- 0.2 mm(17)
- 0.351 mm(5)
- 0.4 mm(27)
- 0.601 mm(2)
- 0.8 mm(37)
- 1.201 mm(37)
- 1.6 mm(33)
- 2.375 mm(4)
- 2.401 mm(13)
- 4.0 mm(5)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (24)
- CW5025 (15)
- K060 (4)
- K090 (5)
- K1 (5)
- K313 (35)
- K68 (33)
- KB1340 (6)
- KB1345 (11)
- KB1610 (17)
- KB1630 (14)
- KB5610 (14)
- KB5630 (14)
- KBH10 (22)
- KBH10B (19)
- KBH20 (22)
- KBH20B (19)
- KBK35 (2)
- KC5010 (37)
- KC5025 (36)
- KC5410 (34)
- KC730 (25)
- KC850 (36)
- KC9125 (4)
- KCK05 (27)
- KCK05B (7)
- KCK15 (32)
- KCK15B (32)
- KCK20 (37)
- KCK20B (31)
- KCM15 (33)
- KCM15B (32)
- KCM25 (36)
- KCM25B (37)
- KCM35 (36)
- KCM35B (16)
- KCP05 (23)
- KCP05B (23)
- KCP10 (37)
- KCP10B (37)
- KCP25 (37)
- KCP25B (37)
- KCP25C (37)
- KCP30 (36)
- KCP30B (28)
- KCP40 (33)
- KCP40B (36)
- KCPK05 (37)
- KCS10 (4)
- KCS10B (37)
- KCU10 (37)
- KCU10B (37)
- KCU25 (37)
- KCU25B (37)
- KD1400 (14)
- KD1405 (14)
- KD1425 (16)
- KS15 (4)
- KT315 (23)
- KT325 (4)
- KTP10 (23)
- KTP25S (21)
- KY1540 (4)
- KY1615 (7)
- KY3500 (36)
- KY4300 (19)
- KY4400 (30)
- KYHK15B (30)
- KYK10 (12)
- KYK25 (23)
- KYS25 (5)
- KYS30 (14)
- PB100 (4)
- THM (14)
- THM-X (10)
- THMF-X (5)
- TN10P (30)
- TN10U (21)
- TN15M (18)
- TN15U (15)
- TN2000 (21)
- TN20K (31)
- TN20P (32)
- TN30M (22)
- TN30P (21)
- TN4000 (21)
- TN6010 (9)
- TTR-X (5)
- TTS (14)
- WBH10P (14)
- WBH10U (4)
- WBH20P (22)
- WBH30P (14)
- WBK40U (1)
- WBK45U (7)
- WDN00U (11)
- WDN25U (16)
- WK05CT (37)
- WK15CT (13)
- WK20CT (37)
- WM15CT (36)
- WM25CT (37)
- WM35CT (30)
- WP05CT (6)
- WP15CT (37)
- WP25CT (37)
- WP35CT (36)
- WS10PT (36)
- WS25PT (37)
- WU10HT (32)
- WU10PT (16)
- WU25PT (16)
- X00580 (4)
- X00581 (4)
- X00582 (4)
- X00583 (4)
- X00584 (4)
- X00585 (4)
- X00586 (4)
- X00591 (4)
- X00592 (4)
- X00593 (4)
- X00594 (4)
- X00596 (4)
- X00597 (4)
- X00599 (4)
Hand Of Tool
Hand Of Tool
- L (4)
- N (4)
- R (4)
Wiper Insert
Wiper Insert
- N (37)
- Y (13)
F Dimension
F Dimension
- 0.0 mm(4)
- 35.0 mm(8)
to
F Dimension
F Dimension
- 0.0 in(4)
- 1.379 in(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 81.0 mm(3)
- 110.0 mm(15)
- 125.0 mm(7)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 3.189 in(3)
- 4.331 in(15)
- 4.921 in(7)
to
Cutting Direction
Cutting Direction
- S (12)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (8)
- NEGATIVE-ZERO (4)
Maximum Bore Depth
Maximum Bore Depth
- 2.047 in(2)
- 2.126 in(1)
- 2.205 in(1)
- 2.559 in(16)
to
Maximum Bore Depth
Maximum Bore Depth
- 52.0 mm(2)
- 54.0 mm(1)
- 56.0 mm(1)
- 65.0 mm(16)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (12)
- D-DIAMOND/RHOMBIC 55 (13)
- S-SQUARE 90 (7)
- V-DIAMOND/RHOMBIC 35 (3)
- W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (18)
- B L (22)
- C A (31)
- C N (36)
- D P (21)
- H T (23)
- H W (37)
Back-End
Connection Type
Connection Type
- TAPER SHANK (12)
System Size
System Size
- PSC63 (12)
No filters matching ""