M16 Series

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (15)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
    • M Stainless Steel (12)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
    • K Cast Iron (14)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
    • N Non-Ferrous Materials (4)
      • N1
        Wrought Aluminum (4)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(4)
    • S High-Temp Alloys (12)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(8)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(8)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(8)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
    Applications
    Applications
    • Slot MillingSlot Milling (4)
    • Slot SideSlot Side (4)
    • Slot TSlot T (4)
    Cutting Diameter
    Cutting Diameter
    • 0.9842 in(1)
    • 1.255 in(1)
    • 1.57 in(1)
    • 1.964 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 24.9 mm(1)
    • 31.873 mm(1)
    • 39.875 mm(1)
    • 49.875 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 10.95 mm(1)
    • 13.85 mm(1)
    • 17.85 mm(1)
    • 21.85 mm(1)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.431 in(1)
    • 0.545 in(1)
    • 0.703 in(1)
    • 0.86 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.26 in(1)
    • 1.654 in(1)
    • 1.929 in(1)
    • 2.362 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 32.0 mm(1)
    • 42.0 mm(1)
    • 49.0 mm(1)
    • 60.0 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (4)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Weldon (4)
    Number of Flutes
    Number of Flutes
    • 2 (4)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.15 in(1)
    • 3.543 in(1)
    • 4.134 in(1)
    • 4.724 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(1)
    • 90.0 mm(1)
    • 105.0 mm(1)
    • 120.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.016 in(5)
    • 0.031 in(16)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(5)
    • 0.8 mm(16)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (4)
    • TTM08 (6)
    • WK15CM (8)
    • WP35CM (8)
    • WP40PM (8)
    Hand Of Tool
    Hand Of Tool
    • R (4)
    Wiper Insert
    Wiper Insert
    • N (17)
    Front-End
    Cutting Width
    Cutting Width
    • 0.431 in(1)
    • 0.545 in(1)
    • 0.703 in(1)
    • 0.86 in(1)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 10.95 mm(1)
    • 13.85 mm(1)
    • 17.85 mm(1)
    • 21.85 mm(1)
    Cutting Width MintoCutting Width Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.2451 in(1)
    • 0.332 in(1)
    • 0.411 in(1)
    • 0.4885 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 6.175 mm(1)
    • 8.4365 mm(1)
    • 10.4375 mm(1)
    • 12.4025 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Neck Diameter
    Neck Diameter
    • 0.4941 in(1)
    • 0.591 in(1)
    • 0.748 in(1)
    • 0.987 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 12.55 mm(1)
    • 15.0 mm(1)
    • 19.0 mm(1)
    • 25.07 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • C-DIAMOND/RHOMBIC 80 (17)
    Insert IC Size
    Insert IC Size
    • 6.35 mm(4)
    • 7.938 mm(5)
    • 9.52 mm(4)
    • 12.7 mm(4)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(4)
    • 0.3125 in(5)
    • 0.3748 in(4)
    • 0.5 in(4)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.448 mm(4)
    • 8.06 mm(5)
    • 9.672 mm(4)
    • 12.896 mm(4)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2539 in(4)
    • 0.3173 in(5)
    • 0.3808 in(4)
    • 0.5077 in(4)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (17)
    Tolerance Class
    Tolerance Class
    • N (17)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (4)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(2)
    • 25.0 mm(1)
    • 32.0 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.6299 in(2)
    • 0.9843 in(1)
    • 1.2598 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)