D-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (6)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
- M Stainless Steel (6)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
- K Cast Iron (6)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
- N Non-Ferrous Materials (6)
- N1Wrought Aluminum (6)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (6)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (6)
- N6Carbon, Graphite Composites, CFRP (6)
- N7MMC's (6)
- S High-Temp Alloys (6)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
- H Hardened Materials (6)
- H1Hardened Materials 44-48 HRC(6)
- H2Hardened Materials 48-55 HRC(6)
- H3Hardened Materials 56-60 HRC(6)
- H4Hardened Materials >60 HRC(6)
- C CFRP Materials (6)
- C1CFRP, CFRP / CFRP (6)
- C2CFRP / Aluminium CFRP / Non-Ferrous (6)
Applications
Applications
Facing (6)
ID Facing (6)
Multiple Direction Cutting (6)
TRN Boring (6)
Turning (4)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (6)
- Lightly Interrupted Cut (6)
- Smooth Cut (6)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (2)
- 95.0 (4)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 2.0 (6)
- 4.0 (6)
- 8.0 (4)
to
Over All Length [L]
Over All Length [L]
- 3.938 in(2)
- 5.513 in(4)
to
Over All Length [L]
Over All Length [L]
- 100.0 mm(2)
- 140.0 mm(4)
to
Corner Radius
Corner Radius
- 0.004 in(4)
- 0.008 in(3)
- 0.014 in(1)
- 0.016 in(6)
- 0.031 in(6)
- 0.047 in(6)
- 0.063 in(6)
- 0.094 in(2)
- 0.095 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(4)
- 0.2 mm(3)
- 0.351 mm(1)
- 0.4 mm(6)
- 0.8 mm(6)
- 1.201 mm(6)
- 1.6 mm(6)
- 2.375 mm(2)
- 2.401 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (6)
- CW5025 (5)
- K060 (2)
- K313 (6)
- K68 (6)
- KB1340 (2)
- KB1345 (3)
- KB1610 (3)
- KB1630 (3)
- KB5610 (3)
- KB5630 (3)
- KBH10 (4)
- KBH10B (4)
- KBH20 (4)
- KBH20B (4)
- KBK35 (2)
- KC5010 (6)
- KC5025 (6)
- KC5410 (6)
- KC730 (5)
- KC850 (6)
- KCK05 (6)
- KCK05B (2)
- KCK15 (6)
- KCK15B (6)
- KCK20 (6)
- KCK20B (6)
- KCM15 (6)
- KCM15B (6)
- KCM25 (6)
- KCM25B (6)
- KCM35 (6)
- KCM35B (5)
- KCP05 (4)
- KCP05B (4)
- KCP10 (6)
- KCP10B (6)
- KCP25 (6)
- KCP25B (6)
- KCP25C (6)
- KCP30 (6)
- KCP30B (5)
- KCP40 (6)
- KCP40B (6)
- KCPK05 (6)
- KCS10 (2)
- KCS10B (6)
- KCU10 (6)
- KCU10B (6)
- KCU25 (6)
- KCU25B (6)
- KD1400 (3)
- KD1405 (3)
- KD1425 (3)
- KS15 (2)
- KT315 (4)
- KT325 (2)
- KTP10 (4)
- KTP25S (4)
- KY1540 (2)
- KY1615 (1)
- KY3500 (6)
- KY4300 (5)
- KY4400 (6)
- KYHK15B (6)
- KYK10 (3)
- KYK25 (5)
- KYS25 (2)
- KYS30 (3)
- PB100 (2)
- THM (2)
- THM-X (3)
- THMF-X (2)
- TN10P (6)
- TN10U (4)
- TN15M (4)
- TN15U (3)
- TN2000 (3)
- TN20K (6)
- TN20P (6)
- TN30M (4)
- TN30P (5)
- TN4000 (3)
- TN6010 (3)
- TTS (2)
- WBH10P (3)
- WBH10U (2)
- WBH20P (4)
- WBH30P (3)
- WBK45U (1)
- WDN00U (3)
- WDN25U (3)
- WK05CT (6)
- WK15CT (3)
- WK20CT (6)
- WM15CT (6)
- WM25CT (6)
- WM35CT (5)
- WP05CT (2)
- WP15CT (6)
- WP25CT (6)
- WP35CT (6)
- WS10PT (6)
- WS25PT (6)
- WU10HT (6)
- WU10PT (3)
- WU25PT (3)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
Hand Of Tool
Hand Of Tool
- L (3)
- R (3)
Wiper Insert
Wiper Insert
- N (6)
- Y (4)
F Dimension
F Dimension
- 17.0 mm(2)
- 27.0 mm(4)
to
F Dimension
F Dimension
- 0.669 in(2)
- 1.063 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(2)
- 50.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.26 in(2)
- 1.969 in(4)
to
Cutting Direction
Cutting Direction
- B (4)
- E (2)
Maximum Bore Depth
Maximum Bore Depth
- 2.835 in(2)
- 4.488 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 72.0 mm(2)
- 114.0 mm(4)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (4)
- D-DIAMOND/RHOMBIC 55 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (3)
- B L (4)
- C A (6)
- C N (6)
- D P (4)
- H T (4)
- H W (6)
No filters matching ""