X-Feed™ • Series 70NS • Stainless Steel/High-Temp • High Feed • 6 Flute • Cylindrical Shank • Metric
Product Similar To:
X-Feed™ • Series 70NS • Stainless Steel/High-Temp • High Feed • 6 Flute • Cylindrical Shank • Metric
X-Feed™
Material Number100125790
Contact our sales team to discover all of your pricing options
Ramping: Blank
Shank - Cylindrical Plain
Corner Style: Torus
Helix Angle: 20°
Tool Dimensions: Flute Configuration: 6
3D Profiling
Application Data • Series 70NS • Stainless Steel/High-Temp • Metric
| 70NS Metric | |||||||||||||||
| Geometrical Parameters | Ramping Guide for Circular and Linear Interpolation | ||||||||||||||
| Circular Interpolation | Linear Interpolation | ||||||||||||||
| Allowed Range of Hole Diameter | Calculated Length (mm) per Ramp Angle | ||||||||||||||
| diameter | ap max | Rfm | Rt | Rc | Xfm | Yfm | YD | Number | Ramp Angle (degree) | ||||||
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | flutes | Smallest | Largest | 1 | 2 | 3 | 4 | 5 |
| 6 | 0,32 | 6 | 0,67 | 0,375 | 0,338 | 0,75 | 1,26 | 6 | 8,52 | 12 | 18,12 | 9,06 | 6,03 | 4,52 | 3,61 |
| 8 | 0,42 | 8 | 0,89 | 0,500 | 0,450 | 1,00 | 1,68 | 6 | 11,36 | 16 | 24,16 | 12,08 | 8,05 | 6,03 | 4,82 |
| 10 | 0,53 | 10 | 1,12 | 0,625 | 0,562 | 1,25 | 2,10 | 6 | 14,2 | 20 | 30,20 | 15,09 | 10,06 | 7,54 | 6,02 |
| 12 | 0,63 | 12 | 1,34 | 0,750 | 0,674 | 1,50 | 2,52 | 6 | 17,04 | 24 | 36,24 | 18,11 | 12,07 | 9,05 | 7,23 |
| 16 | 0,84 | 16 | 1,79 | 1,000 | 0,915 | 2,00 | 3,36 | 6 | 22,72 | 32 | 48,31 | 24,15 | 16,09 | 12,06 | 9,64 |
| 20 | 1,05 | 20 | 2,23 | 1,250 | 1,124 | 2,50 | 4,20 | 6 | 28,4 | 40 | 60,39 | 30,19 | 20,11 | 15,08 | 12,05 |
| 25 | 1,25 | 25 | 2,90 | 1,5625 | 1,405 | 3,1250 | 5,25 | 6 | 35,5 | 50 | 70,61 | 35,80 | 23,85 | 17,88 | 14,29 |
| Recommended Feed | 30% | 30% | 30% | 30% | 10% | ||||||||||
Programming Data
| Material |  |  | ||||||||||||
| Profile Milling | AlTiN-MT | Recommended feed per tooth (fz = mm/th) for 3D milling/profiling (A) | ||||||||||||
| A | Cutting Speed | D1 | ||||||||||||
| ap | ae | Min | Max | mm | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||
| M | 1 | 0,05 x D | 0,55 x D | 90 | – | 115 | fz | 0,300 | 0,400 | 0,500 | 0,540 | 0,720 | 0,900 | 1,125 |
| – | 2 | 0,05 x D | 0,55 x D | 60 | – | 80 | fz | 0,240 | 0,320 | 0,400 | 0,480 | 0,640 | 0,800 | 1,000 |
| – | 3 | 0,05 x D | 0,55 x D | 60 | – | 70 | fz | 0,240 | 0,320 | 0,400 | 0,480 | 0,640 | 0,800 | 1,000 |
| S | 1 | 0,05 x D | 0,55 x D | 50 | – | 90 | fz | 0,270 | 0,360 | 0,450 | 0,500 | 0,650 | 0,800 | 1,000 |
| – | 2 | 0,05 x D | 0,55 x D | 25 | – | 40 | fz | 0,240 | 0,320 | 0,400 | 0,480 | 0,600 | 0,700 | 0,900 |
| – | 3 | 0,05 x D | 0,55 x D | 25 | – | 40 | fz | 0,180 | 0,240 | 0,300 | 0,350 | 0,430 | 0,500 | 0,600 |
| – | 4 | 0,05 x D | 0,55 x D | 50 | – | 60 | fz | 0,210 | 0,280 | 0,350 | 0,420 | 0,560 | 0,700 | 0,875 |