TopThread™

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (208)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(208)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(208)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(208)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(208)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(208)
    • M Stainless Steel (208)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(208)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(208)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(208)
    • K Cast Iron (208)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(208)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(208)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(208)
    • N Non-Ferrous Materials (208)
      • N1
        Wrought Aluminum (208)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(208)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(208)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (208)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (208)
      • N6
        Carbon, Graphite Composites, CFRP (208)
      • N7
        MMC's (208)
    • S High-Temp Alloys (208)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(208)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(208)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(208)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(208)
    • H Hardened Materials (157)
      • H1
        Hardened Materials 44-48 HRC(157)
      • H2
        Hardened Materials 48-55 HRC(157)
      • H3
        Hardened Materials 56-60 HRC(148)
      • H4
        Hardened Materials >60 HRC(148)
    Select All Star
    • DE (5)
    • IN (3)
    • US (83)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (6)
    • Cut-OffCut-Off (6)
    • Deep GroovingDeep Grooving (6)
    • Face GroovingFace Grooving (73)
    • FacingFacing (12)
    • GroovingGrooving (102)
    • ID GroovingID Grooving (59)
    • ID Thread TurningID Thread Turning (128)
    • Multiple Direction CuttingMultiple Direction Cutting (6)
    • OD Thread TurningOD Thread Turning (167)
    • Plunge TurningPlunge Turning (6)
    • ProfilingProfiling (8)
    • TRN BoringTRN Boring (6)
    • ThreadingThreading (94)
    • TurningTurning (12)
    Type of Thread
    Type of Thread
    • 60 (158)
    • ACME (89)
    • API (16)
    • API RD (56)
    • BSW (35)
    • BUTTRESS (53)
    • M (20)
    • NPT (12)
    • STUB ACME (56)
    • UN (148)
    • UNJ (35)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (130)
    • Lightly Interrupted Cut (130)
    • Smooth Cut (135)
    • Varying Depth of Cut (130)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (140)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (40)
    • KM (28)
    • Toolholder (48)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (137)
    • 2.0 (201)
    • 4.0 (2)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(8)
    • 1.85 in(4)
    • 2.5 in(1)
    • 2.757 in(6)
    • 3.15 in(3)
    • 3.5 in(1)
    • 3.543 in(4)
    • 3.938 in(5)
    • 4.0 in(2)
    • 4.331 in(4)
    • 4.5 in(9)
    • 4.921 in(8)
    • 5.0 in(9)
    • 5.906 in(19)
    • 6.0 in(22)
    • 6.694 in(2)
    • 7.087 in(2)
    • 7.875 in(4)
    • 8.0 in(3)
    • 9.843 in(2)
    • 10.0 in(5)
    • 11.811 in(3)
    • 12.0 in(4)
    • 13.781 in(1)
    • 14.0 in(6)
    • 16.0 in(3)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(8)
    • 47.0 mm(4)
    • 63.5 mm(1)
    • 70.0 mm(6)
    • 80.0 mm(3)
    • 88.9 mm(1)
    • 90.0 mm(4)
    • 100.0 mm(5)
    • 101.601 mm(2)
    • 110.0 mm(4)
    • 114.301 mm(9)
    • 125.0 mm(8)
    • 127.0 mm(9)
    • 150.0 mm(19)
    • 152.4 mm(22)
    • 170.0 mm(2)
    • 180.0 mm(2)
    • 200.0 mm(4)
    • 203.201 mm(3)
    • 250.0 mm(2)
    • 254.0 mm(5)
    • 300.0 mm(3)
    • 304.8 mm(4)
    • 350.0 mm(1)
    • 355.6 mm(6)
    • 406.401 mm(3)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.002 in(12)
    • 0.003 in(114)
    • 0.004 in(100)
    • 0.005 in(14)
    • 0.006 in(26)
    • 0.007 in(123)
    • 0.008 in(137)
    • 0.01 in(72)
    • 0.011 in(12)
    • 0.012 in(34)
    • 0.014 in(78)
    • 0.016 in(55)
    • 0.019 in(16)
    • 0.02 in(67)
    • 0.023 in(75)
    • 0.03 in(55)
    • 0.031 in(108)
    • 0.035 in(16)
    • 0.039 in(108)
    • 0.047 in(108)
    • 0.049 in(108)
    • 0.06 in(108)
    • 0.062 in(53)
    • 0.063 in(91)
    • 0.069 in(108)
    • 0.078 in(53)
    • 0.079 in(75)
    • 0.089 in(75)
    • 0.095 in(75)
    • 0.098 in(22)
    • 0.125 in(22)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(12)
    • 0.076 mm(114)
    • 0.1 mm(100)
    • 0.125 mm(14)
    • 0.151 mm(26)
    • 0.176 mm(123)
    • 0.2 mm(137)
    • 0.225 mm(35)
    • 0.25 mm(70)
    • 0.275 mm(12)
    • 0.301 mm(34)
    • 0.325 mm(76)
    • 0.351 mm(59)
    • 0.4 mm(55)
    • 0.45 mm(16)
    • 0.476 mm(6)
    • 0.5 mm(67)
    • 0.576 mm(75)
    • 0.75 mm(55)
    • 0.775 mm(108)
    • 0.9 mm(16)
    • 1.0 mm(108)
    • 1.201 mm(108)
    • 1.25 mm(108)
    • 1.5 mm(108)
    • 1.576 mm(53)
    • 1.6 mm(91)
    • 1.75 mm(108)
    • 1.975 mm(53)
    • 2.0 mm(75)
    • 2.25 mm(75)
    • 2.401 mm(75)
    • 2.5 mm(22)
    • 3.176 mm(22)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(71)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(71)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (28)
    • K313 (32)
    • K420 (32)
    • K4H (20)
    • K68 (32)
    • KB1345 (16)
    • KB1630 (16)
    • KB5625 (12)
    • KBH20 (6)
    • KC250 (28)
    • KC5010 (32)
    • KC5025 (32)
    • KC5410 (32)
    • KC710 (32)
    • KC720 (32)
    • KC722 (32)
    • KC730 (32)
    • KC732 (12)
    • KC810 (32)
    • KC850 (32)
    • KC910 (20)
    • KC9110 (32)
    • KC9120 (12)
    • KC9320 (32)
    • KC935 (32)
    • KC950 (32)
    • KCK20 (24)
    • KCK20B (32)
    • KCP10B (32)
    • KCP25B (32)
    • KCU10 (32)
    • KCU10B (32)
    • KCU25 (32)
    • KCU25B (32)
    • KD050 (6)
    • KD081 (12)
    • KD100 (14)
    • KD120 (16)
    • KD1425 (12)
    • KT175 (28)
    • KT315 (32)
    • KU10T (32)
    • KU25T (32)
    • KU30T (32)
    • KY3000 (16)
    • THM (108)
    • TN10P (88)
    • TN6010 (157)
    • TN6025 (188)
    • TN7110 (130)
    • WU10HT (27)
    • WU10PT (46)
    • WU25PT (26)
    Hand Of Tool
    Hand Of Tool
    • L (46)
    • R (70)
    Wiper Insert
    Wiper Insert
    • N (210)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 10.3 mm(1)
    • 11.0 mm(10)
    • 11.101 mm(2)
    • 12.0 mm(1)
    • 12.701 mm(5)
    • 13.0 mm(4)
    • 14.275 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 17.0 mm(12)
    • 17.475 mm(4)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(6)
    • 22.225 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(8)
    • 27.0 mm(11)
    • 28.0 mm(1)
    • 31.75 mm(16)
    • 32.0 mm(7)
    • 34.926 mm(2)
    • 35.0 mm(1)
    • 38.1 mm(4)
    • 40.0 mm(2)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.406 in(1)
    • 0.433 in(10)
    • 0.437 in(2)
    • 0.473 in(1)
    • 0.5 in(5)
    • 0.512 in(4)
    • 0.562 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.669 in(12)
    • 0.689 in(4)
    • 0.75 in(1)
    • 0.787 in(1)
    • 0.866 in(6)
    • 0.875 in(2)
    • 0.984 in(3)
    • 1.0 in(8)
    • 1.063 in(11)
    • 1.102 in(1)
    • 1.25 in(16)
    • 1.26 in(7)
    • 1.375 in(2)
    • 1.379 in(1)
    • 1.5 in(4)
    • 1.575 in(2)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(52)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(4)
    • 18.55 mm(2)
    • 20.0 mm(4)
    • 20.326 mm(1)
    • 22.0 mm(2)
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 26.0 mm(2)
    • 28.576 mm(2)
    • 32.0 mm(4)
    • 34.0 mm(8)
    • 34.926 mm(4)
    • 40.0 mm(4)
    • 41.301 mm(25)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.6 mm(25)
    • 50.801 mm(2)
    • 54.0 mm(9)
    • 55.875 mm(1)
    • 56.625 mm(2)
    • 57.2 mm(12)
    • 60.325 mm(1)
    • 63.5 mm(7)
    • 69.851 mm(2)
    • 70.0 mm(1)
    • 76.2 mm(1)
    • 88.9 mm(28)
    • 139.701 mm(25)
    • 174.601 mm(25)
    • 209.601 mm(12)
    • 222.3 mm(12)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(52)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(4)
    • 0.73 in(2)
    • 0.787 in(4)
    • 0.8 in(1)
    • 0.866 in(2)
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.024 in(2)
    • 1.125 in(2)
    • 1.26 in(4)
    • 1.339 in(8)
    • 1.375 in(4)
    • 1.575 in(4)
    • 1.627 in(25)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.874 in(25)
    • 2.0 in(2)
    • 2.126 in(9)
    • 2.2 in(1)
    • 2.229 in(2)
    • 2.253 in(12)
    • 2.375 in(1)
    • 2.5 in(7)
    • 2.75 in(2)
    • 2.757 in(1)
    • 3.0 in(1)
    • 3.5 in(28)
    • 5.5 in(25)
    • 6.875 in(25)
    • 8.252 in(12)
    • 8.752 in(12)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(135)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(135)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 14.5 (14)
    • 27.0 (2)
    • 27.5 (2)
    • 30.0 (50)
    • 33.0 (2)
    • 45.0 (1)
    Countersunk Angle MintoCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (54)
    • S (62)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (1)
    • NEUTRAL (ZERO) (115)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.0 in(7)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.575 in(6)
    • 1.655 in(2)
    • 1.891 in(2)
    • 2.0 in(15)
    • 2.169 in(4)
    • 2.209 in(2)
    • 2.5 in(3)
    • 2.52 in(2)
    • 2.757 in(2)
    • 2.955 in(4)
    • 2.993 in(2)
    • 3.0 in(2)
    • 3.15 in(4)
    • 3.781 in(2)
    • 3.938 in(4)
    • 4.0 in(4)
    • 5.0 in(2)
    • 5.039 in(2)
    • 6.0 in(2)
    • 6.299 in(3)
    • 7.0 in(2)
    • 7.875 in(1)
    • 8.0 in(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.401 mm(7)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 32.775 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(6)
    • 42.026 mm(2)
    • 48.0 mm(2)
    • 50.801 mm(15)
    • 55.1 mm(4)
    • 56.1 mm(2)
    • 63.5 mm(3)
    • 64.0 mm(2)
    • 70.025 mm(2)
    • 75.05 mm(4)
    • 76.025 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(4)
    • 96.025 mm(2)
    • 100.0 mm(4)
    • 101.601 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 177.8 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (2)
    • S (60)
    Front-End
    Clamp Style
    Clamp Style
    • N (140)
    Cutting Width
    Cutting Width
    • 0.02 in(55)
    • 0.031 in(55)
    • 0.035 in(16)
    • 0.039 in(108)
    • 0.041 in(39)
    • 0.047 in(113)
    • 0.055 in(55)
    • 0.058 in(55)
    • 0.06 in(108)
    • 0.062 in(113)
    • 0.067 in(55)
    • 0.069 in(108)
    • 0.073 in(53)
    • 0.077 in(55)
    • 0.078 in(53)
    • 0.079 in(108)
    • 0.088 in(108)
    • 0.089 in(81)
    • 0.094 in(27)
    • 0.095 in(113)
    • 0.097 in(12)
    • 0.098 in(108)
    • 0.105 in(12)
    • 0.108 in(108)
    • 0.11 in(12)
    • 0.119 in(130)
    • 0.122 in(12)
    • 0.125 in(130)
    • 0.126 in(73)
    • 0.128 in(108)
    • 0.129 in(16)
    • 0.131 in(6)
    • 0.138 in(130)
    • 0.143 in(12)
    • 0.147 in(31)
    • 0.15 in(8)
    • 0.151 in(8)
    • 0.152 in(55)
    • 0.156 in(53)
    • 0.157 in(75)
    • 0.167 in(57)
    • 0.169 in(12)
    • 0.177 in(75)
    • 0.178 in(12)
    • 0.185 in(14)
    • 0.188 in(66)
    • 0.189 in(75)
    • 0.192 in(27)
    • 0.193 in(6)
    • 0.195 in(33)
    • 0.196 in(53)
    • 0.197 in(22)
    • 0.202 in(4)
    • 0.213 in(4)
    • 0.217 in(22)
    • 0.219 in(4)
    • 0.237 in(22)
    • 0.25 in(22)
    • 0.256 in(4)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(55)
    • 0.775 mm(55)
    • 0.8 mm(55)
    • 0.9 mm(16)
    • 1.0 mm(108)
    • 1.05 mm(39)
    • 1.201 mm(113)
    • 1.401 mm(55)
    • 1.475 mm(55)
    • 1.5 mm(108)
    • 1.576 mm(113)
    • 1.701 mm(55)
    • 1.75 mm(108)
    • 1.826 mm(53)
    • 1.951 mm(55)
    • 1.975 mm(53)
    • 2.0 mm(108)
    • 2.2 mm(108)
    • 2.225 mm(49)
    • 2.25 mm(81)
    • 2.375 mm(27)
    • 2.401 mm(113)
    • 2.475 mm(12)
    • 2.5 mm(108)
    • 2.676 mm(12)
    • 2.75 mm(108)
    • 2.801 mm(12)
    • 3.0 mm(130)
    • 3.1 mm(12)
    • 3.176 mm(130)
    • 3.2 mm(73)
    • 3.25 mm(108)
    • 3.276 mm(16)
    • 3.325 mm(6)
    • 3.5 mm(130)
    • 3.6 mm(12)
    • 3.725 mm(31)
    • 3.801 mm(8)
    • 3.825 mm(8)
    • 3.85 mm(55)
    • 3.95 mm(53)
    • 3.975 mm(27)
    • 4.0 mm(75)
    • 4.25 mm(57)
    • 4.3 mm(12)
    • 4.5 mm(75)
    • 4.525 mm(12)
    • 4.7 mm(14)
    • 4.775 mm(66)
    • 4.801 mm(75)
    • 4.875 mm(27)
    • 4.9 mm(6)
    • 4.95 mm(33)
    • 4.976 mm(53)
    • 5.0 mm(22)
    • 5.125 mm(4)
    • 5.4 mm(4)
    • 5.5 mm(22)
    • 5.575 mm(4)
    • 6.0 mm(22)
    • 6.351 mm(22)
    • 6.5 mm(4)
    Cutting Width MintoCutting Width Max
    Insert Size
    Insert Size
    • 1 (6)
    • 2 (57)
    • 3 (55)
    • 4 (19)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.067 in(1)
    • 0.138 in(35)
    • 0.21 in(36)
    • 0.225 in(1)
    • 0.24 in(1)
    • 0.294 in(15)
    • 0.334 in(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.701 mm(1)
    • 3.5 mm(35)
    • 5.325 mm(36)
    • 5.726 mm(1)
    • 6.101 mm(1)
    • 7.476 mm(15)
    • 8.475 mm(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Thread TPI
    Thread TPI
    • 2.0 (2)
    • 3.0 (1)
    • 4.0 (4)
    • 6.0 (3)
    • 8.0 (6)
    • 10.0 (1)
    • 11.0 (1)
    • 12.0 (4)
    • 14.0 (2)
    • 16.0 (2)
    • 20.0 (2)
    • 24.0 (2)
    Thread TPI MintoThread TPI Max
    Thread Pitch
    Thread Pitch
    • 2.0 mm(2)
    • 6.25 mm(1)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.079 in(2)
    • 0.246 in(1)
    Thread Pitch MintoThread Pitch Max
    Insert Geometry
    Shape
    Shape
    • TN-TOP NOTCH (71)
    Insert IC Size
    Insert IC Size
    • 4.75 mm(1)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.187 in(1)
    Insert IC Size MintoInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (2)
    • 2 (16)
    • 3 (42)
    • 4 (7)
    • 4U (1)
    • 6 (3)
    Cutting Tool Material
    Cutting Tool Material
    • B H (16)
    • B L (12)
    • C N (16)
    • D P (14)
    • H T (32)
    • H W (210)
    Back-End
    Connection Type
    Connection Type
    • BORING BAR (40)
    • SQUARE SHANK (48)
    • TAPER SHANK (28)
    System Size
    System Size
    • KM40TS (28)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.701 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(35)
    • 44.45 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(3)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(35)
    • 1.75 in(2)
    • 1.969 in(1)
    • 2.0 in(3)
    Back-End Diameter MintoBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(1)
    • 0.473 in(2)
    • 0.5 in(4)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(6)
    • 0.787 in(4)
    • 0.984 in(7)
    • 1.0 in(12)
    • 1.25 in(5)
    • 1.26 in(2)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(1)
    • 12.0 mm(2)
    • 12.701 mm(4)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(6)
    • 20.0 mm(4)
    • 25.0 mm(7)
    • 25.401 mm(12)
    • 31.75 mm(5)
    • 32.0 mm(2)
    Shank Height MintoShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(1)
    • 0.473 in(2)
    • 0.5 in(4)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(6)
    • 0.787 in(4)
    • 0.984 in(7)
    • 1.0 in(13)
    • 1.25 in(4)
    • 1.26 in(2)
    Shank Width MintoShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(1)
    • 12.0 mm(2)
    • 12.701 mm(4)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(6)
    • 20.0 mm(4)
    • 25.0 mm(7)
    • 25.401 mm(13)
    • 31.75 mm(4)
    • 32.0 mm(2)
    Shank Width MintoShank Width Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?