M4000 Series

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (35)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(35)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(35)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(35)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(35)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(35)
    • M Stainless Steel (35)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(35)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(35)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(35)
    • K Cast Iron (35)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(35)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(35)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(35)
    • N Non-Ferrous Materials (31)
      • N1
        Wrought Aluminum (31)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(31)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(31)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (19)
      • N6
        Carbon, Graphite Composites, CFRP (19)
      • N7
        MMC's (19)
    • S High-Temp Alloys (35)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(34)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(34)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(34)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(35)
    • H Hardened Materials (31)
      • H1
        Hardened Materials 44-48 HRC(31)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (4)
    • Face MillingFace Milling (35)
    • Shoulder MillingShoulder Milling (5)
    Cutting Diameter
    Cutting Diameter
    • 4.921 in(2)
    • 6.0 in(2)
    • 6.299 in(2)
    • 7.875 in(2)
    • 9.843 in(2)
    • 12.0 in(2)
    • 12.403 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 125.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(2)
    • 200.0 mm(2)
    • 250.0 mm(2)
    • 304.8 mm(2)
    • 315.0 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.0 mm(1)
    • 1.026 mm(1)
    • 3.5 mm(1)
    • 4.351 mm(1)
    • 4.7 mm(1)
    • 4.801 mm(1)
    • 6.0 mm(2)
    • 6.301 mm(1)
    • 8.0 mm(2)
    • 9.0 mm(2)
    • 9.8 mm(1)
    • 10.0 mm(1)
    • 11.5 mm(1)
    • 11.65 mm(1)
    • 12.0 mm(2)
    • 14.0 mm(1)
    • 14.9 mm(1)
    • 15.0 mm(1)
    • 15.9 mm(1)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.039 in(1)
    • 0.04 in(1)
    • 0.138 in(1)
    • 0.171 in(1)
    • 0.185 in(1)
    • 0.189 in(1)
    • 0.237 in(2)
    • 0.248 in(1)
    • 0.315 in(2)
    • 0.354 in(2)
    • 0.386 in(1)
    • 0.394 in(1)
    • 0.453 in(1)
    • 0.459 in(1)
    • 0.473 in(2)
    • 0.551 in(1)
    • 0.587 in(1)
    • 0.591 in(1)
    • 0.626 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 2.48 in(6)
    • 2.677 in(2)
    • 3.15 in(6)
    Reach MintoReach Max
    Reach
    Reach
    • 63.0 mm(6)
    • 68.0 mm(2)
    • 80.0 mm(6)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 32.0 (2)
    • 45.0 (5)
    • 58.0 (1)
    • 75.0 (4)
    • 88.85 (1)
    • 89.14 (1)
    • 90.0 (8)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (4)
    • C-Bolt Circle (8)
    • SHCS or RetScrw Or BoltCircle (2)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 12 (3)
    • 14 (1)
    • 16 (2)
    • 18 (1)
    • 22 (2)
    • 6 (1)
    • 8 (3)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.85 in(16)
    • 1.851 in(1)
    • 1.854 in(6)
    • 2.48 in(6)
    • 2.677 in(2)
    • 3.15 in(6)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 47.0 mm(16)
    • 47.026 mm(1)
    • 47.1 mm(6)
    • 63.0 mm(6)
    • 68.0 mm(2)
    • 80.0 mm(6)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.0 in(20)
    • 0.008 in(15)
    • 0.016 in(19)
    • 0.031 in(21)
    • 0.038 in(15)
    • 0.044 in(15)
    • 0.047 in(26)
    • 0.052 in(16)
    • 0.063 in(24)
    • 0.066 in(15)
    • 0.075 in(15)
    • 0.079 in(18)
    • 0.094 in(14)
    • 0.095 in(17)
    • 0.098 in(15)
    • 0.122 in(15)
    • 0.125 in(15)
    • 0.126 in(20)
    • 0.157 in(16)
    • 0.171 in(16)
    • 0.237 in(15)
    • 0.315 in(15)
    • 1.969 in(14)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(20)
    • 0.2 mm(15)
    • 0.4 mm(19)
    • 0.775 mm(15)
    • 0.8 mm(21)
    • 0.976 mm(15)
    • 1.1 mm(15)
    • 1.201 mm(26)
    • 1.3 mm(16)
    • 1.6 mm(24)
    • 1.675 mm(15)
    • 1.901 mm(15)
    • 2.0 mm(18)
    • 2.375 mm(14)
    • 2.401 mm(17)
    • 2.5 mm(15)
    • 3.1 mm(15)
    • 3.176 mm(15)
    • 3.2 mm(20)
    • 4.0 mm(16)
    • 4.351 mm(16)
    • 6.0 mm(15)
    • 8.0 mm(15)
    • 50.0 mm(14)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(34)
    • 0.65 mm(14)
    • 0.701 mm(15)
    • 1.0 mm(15)
    • 1.026 mm(16)
    • 1.401 mm(14)
    • 1.475 mm(15)
    • 1.5 mm(15)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(34)
    • 0.027 in(14)
    • 0.028 in(15)
    • 0.039 in(15)
    • 0.04 in(16)
    • 0.055 in(14)
    • 0.058 in(15)
    • 0.06 in(15)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (23)
    • THM-U (20)
    • THR (15)
    • TN2510 (21)
    • TN25M (22)
    • TN450 (24)
    • TN5015 (15)
    • TN5020 (15)
    • TN5505 (15)
    • TN5515 (30)
    • TN6501 (19)
    • TN6502 (15)
    • TN6505 (17)
    • TN6510 (21)
    • TN6520 (22)
    • TN6525 (25)
    • TN6540 (26)
    • TN7015 (15)
    • TN7035 (15)
    • TN7110 (15)
    • TN7135 (15)
    • TN7525 (25)
    • TN7535 (30)
    • TTI25 (23)
    • TTM (17)
    • TTM08 (22)
    • TTR (18)
    • WDN10U (15)
    • WK15CM (34)
    • WK15PM (18)
    • WK20PM (17)
    • WK25YM (16)
    • WN10HM (16)
    • WN25PM (19)
    • WP25PM (27)
    • WP35CM (35)
    • WP40PM (28)
    • WS30PM (23)
    • WS40PM (26)
    • WU10PM (16)
    • WU20PM (20)
    • WU35PM (18)
    Hand Of Tool
    Hand Of Tool
    • R (14)
    Front-End
    Clamp Style
    Clamp Style
    • C (5)
    • S (18)
    Insert Shape
    Insert Shape
    • H-HEXAGON 120 (20)
    • R-ROUND (15)
    • S-SQUARE 90 (22)
    • T-TRIANGLE 60 (15)
    • X-PARALLELOGRAM 75 (2)
    • X-PARALLELOGRAM 80 (15)
    • X-RECTANGLE MILL 4 90 (17)
    Cartridge Size
    Cartridge Size
    • 15 - mm of Shank Height M400 (23)
    Center Cutting
    Center Cutting
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • C N (2)
    • D P (1)
    • H T (9)
    • H W (21)
    Back-End
    Connection Type
    Connection Type
    • SHELL MILL (14)
    Back-End Diameter
    Back-End Diameter
    • 40.0 mm(4)
    • 50.801 mm(2)
    • 60.0 mm(6)
    • 63.5 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.575 in(4)
    • 2.0 in(2)
    • 2.362 in(6)
    • 2.5 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?