VariDrill

A reliable solid carbide drill to exceed expectations in multi-material drilling operations. ​

This solid carbide drill offers dependable tool life in all materials due to less chipping on the cutting edge. This drill geometry enables chips to roll smoothly and evacuate easily resulting in noticeably less friction, heat, jamming, and scratching.

Product Features

  • 140 degree cone point design to increase tool life in all materials
  • WU25PD drilling grade for high wear resistance and longer tool life
Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (1280)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1280)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1280)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1280)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1280)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1280)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1280)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1280)
    • M Stainless Steel (1280)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1280)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1280)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1280)
    • K Cast Iron (1280)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1280)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1280)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1280)
    • N Non-Ferrous Materials (1280)
      • N1
        Wrought Aluminum (1280)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1280)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(1280)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1280)
    • S High-Temp Alloys (1280)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1280)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1280)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1280)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1280)
    Select All Star
    • CN (199)
    • DE (795)
    • GB (457)
    • IN (123)
    • SG (850)
    • US (488)
    Applications
    Applications
    • DrillingDrilling (1280)
    • Stacked Plates DrillingStacked Plates Drilling (1238)
    Cutting Diameter
    Cutting Diameter
    • 0.039 in(3)
    • 0.04 in(3)
    • 0.041 in(2)
    • 0.042 in(3)
    • 0.044 in(5)
    • 0.046 in(3)
    • 0.047 in(6)
    • 0.052 in(3)
    • 0.053 in(3)
    • 0.055 in(6)
    • 0.06 in(5)
    • 0.063 in(5)
    • 0.067 in(5)
    • 0.072 in(5)
    • 0.075 in(5)
    • 0.078 in(5)
    • 0.079 in(5)
    • 0.083 in(5)
    • 0.088 in(5)
    • 0.091 in(5)
    • 0.094 in(5)
    • 0.095 in(5)
    • 0.096 in(5)
    • 0.098 in(10)
    • 0.101 in(5)
    • 0.103 in(5)
    • 0.105 in(5)
    • 0.106 in(10)
    • 0.109 in(5)
    • 0.11 in(5)
    • 0.111 in(5)
    • 0.113 in(5)
    • 0.114 in(5)
    • 0.116 in(5)
    • 0.119 in(5)
    • 0.12 in(5)
    • 0.122 in(5)
    • 0.125 in(5)
    • 0.126 in(5)
    • 0.129 in(5)
    • 0.13 in(5)
    • 0.134 in(5)
    • 0.136 in(5)
    • 0.138 in(5)
    • 0.142 in(5)
    • 0.143 in(5)
    • 0.145 in(5)
    • 0.146 in(5)
    • 0.147 in(5)
    • 0.15 in(5)
    • 0.154 in(5)
    • 0.156 in(5)
    • 0.157 in(5)
    • 0.159 in(5)
    • 0.161 in(10)
    • 0.165 in(5)
    • 0.166 in(5)
    • 0.169 in(5)
    • 0.173 in(5)
    • 0.174 in(5)
    • 0.177 in(5)
    • 0.181 in(5)
    • 0.182 in(5)
    • 0.185 in(5)
    • 0.188 in(5)
    • 0.189 in(5)
    • 0.191 in(5)
    • 0.193 in(5)
    • 0.197 in(5)
    • 0.201 in(10)
    • 0.203 in(5)
    • 0.206 in(5)
    • 0.209 in(5)
    • 0.213 in(10)
    • 0.217 in(5)
    • 0.219 in(5)
    • 0.221 in(10)
    • 0.224 in(5)
    • 0.228 in(5)
    • 0.232 in(5)
    • 0.234 in(5)
    • 0.237 in(5)
    • 0.24 in(5)
    • 0.244 in(5)
    • 0.248 in(5)
    • 0.25 in(5)
    • 0.252 in(5)
    • 0.256 in(5)
    • 0.257 in(5)
    • 0.26 in(5)
    • 0.261 in(5)
    • 0.264 in(5)
    • 0.266 in(5)
    • 0.268 in(5)
    • 0.272 in(5)
    • 0.276 in(5)
    • 0.28 in(5)
    • 0.281 in(5)
    • 0.284 in(5)
    • 0.288 in(5)
    • 0.291 in(5)
    • 0.295 in(5)
    • 0.297 in(5)
    • 0.299 in(5)
    • 0.303 in(5)
    • 0.307 in(5)
    • 0.311 in(5)
    • 0.313 in(5)
    • 0.315 in(5)
    • 0.319 in(5)
    • 0.323 in(5)
    • 0.327 in(5)
    • 0.328 in(5)
    • 0.331 in(5)
    • 0.332 in(5)
    • 0.335 in(5)
    • 0.339 in(5)
    • 0.343 in(5)
    • 0.345 in(5)
    • 0.347 in(5)
    • 0.351 in(5)
    • 0.354 in(5)
    • 0.358 in(5)
    • 0.359 in(5)
    • 0.362 in(5)
    • 0.366 in(5)
    • 0.368 in(5)
    • 0.37 in(5)
    • 0.374 in(5)
    • 0.375 in(5)
    • 0.378 in(5)
    • 0.382 in(5)
    • 0.386 in(5)
    • 0.39 in(5)
    • 0.391 in(5)
    • 0.394 in(5)
    • 0.398 in(5)
    • 0.402 in(5)
    • 0.406 in(5)
    • 0.408 in(5)
    • 0.41 in(5)
    • 0.414 in(5)
    • 0.417 in(5)
    • 0.421 in(5)
    • 0.422 in(5)
    • 0.425 in(5)
    • 0.429 in(5)
    • 0.433 in(5)
    • 0.437 in(5)
    • 0.438 in(5)
    • 0.441 in(5)
    • 0.445 in(5)
    • 0.449 in(5)
    • 0.453 in(10)
    • 0.457 in(5)
    • 0.461 in(5)
    • 0.465 in(5)
    • 0.47 in(10)
    • 0.473 in(5)
    • 0.477 in(5)
    • 0.48 in(5)
    • 0.484 in(10)
    • 0.488 in(5)
    • 0.492 in(5)
    • 0.496 in(5)
    • 0.5 in(5)
    • 0.504 in(5)
    • 0.508 in(5)
    • 0.512 in(5)
    • 0.516 in(10)
    • 0.52 in(5)
    • 0.524 in(5)
    • 0.528 in(5)
    • 0.531 in(5)
    • 0.535 in(5)
    • 0.539 in(5)
    • 0.543 in(5)
    • 0.547 in(9)
    • 0.551 in(5)
    • 0.555 in(5)
    • 0.559 in(5)
    • 0.564 in(10)
    • 0.568 in(5)
    • 0.572 in(5)
    • 0.576 in(5)
    • 0.578 in(5)
    • 0.579 in(5)
    • 0.583 in(5)
    • 0.587 in(5)
    • 0.591 in(5)
    • 0.594 in(5)
    • 0.595 in(5)
    • 0.598 in(5)
    • 0.602 in(5)
    • 0.606 in(5)
    • 0.609 in(5)
    • 0.61 in(5)
    • 0.614 in(5)
    • 0.618 in(5)
    • 0.622 in(5)
    • 0.625 in(5)
    • 0.626 in(5)
    • 0.63 in(5)
    • 0.634 in(5)
    • 0.638 in(5)
    • 0.641 in(5)
    • 0.642 in(5)
    • 0.646 in(4)
    • 0.65 in(5)
    • 0.654 in(5)
    • 0.656 in(5)
    • 0.657 in(4)
    • 0.661 in(5)
    • 0.665 in(4)
    • 0.669 in(5)
    • 0.673 in(5)
    • 0.677 in(5)
    • 0.681 in(5)
    • 0.685 in(5)
    • 0.689 in(5)
    • 0.69 in(5)
    • 0.694 in(5)
    • 0.698 in(5)
    • 0.702 in(5)
    • 0.704 in(2)
    • 0.705 in(2)
    • 0.709 in(5)
    • 0.713 in(5)
    • 0.717 in(5)
    • 0.719 in(5)
    • 0.72 in(4)
    • 0.724 in(4)
    • 0.728 in(5)
    • 0.732 in(4)
    • 0.734 in(4)
    • 0.736 in(5)
    • 0.74 in(5)
    • 0.744 in(4)
    • 0.748 in(5)
    • 0.75 in(5)
    • 0.752 in(5)
    • 0.756 in(5)
    • 0.76 in(5)
    • 0.764 in(5)
    • 0.768 in(5)
    • 0.772 in(4)
    • 0.776 in(4)
    • 0.78 in(5)
    • 0.784 in(5)
    • 0.787 in(5)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.0 mm(3)
    • 1.026 mm(3)
    • 1.05 mm(2)
    • 1.075 mm(3)
    • 1.1 mm(5)
    • 1.175 mm(3)
    • 1.201 mm(6)
    • 1.3 mm(3)
    • 1.326 mm(3)
    • 1.401 mm(6)
    • 1.5 mm(5)
    • 1.6 mm(5)
    • 1.701 mm(5)
    • 1.8 mm(5)
    • 1.901 mm(5)
    • 1.975 mm(5)
    • 2.0 mm(5)
    • 2.1 mm(5)
    • 2.2 mm(5)
    • 2.301 mm(5)
    • 2.375 mm(5)
    • 2.401 mm(5)
    • 2.45 mm(5)
    • 2.5 mm(10)
    • 2.575 mm(5)
    • 2.6 mm(5)
    • 2.651 mm(5)
    • 2.7 mm(10)
    • 2.776 mm(5)
    • 2.801 mm(5)
    • 2.825 mm(5)
    • 2.875 mm(5)
    • 2.901 mm(5)
    • 2.95 mm(5)
    • 3.0 mm(5)
    • 3.051 mm(5)
    • 3.1 mm(5)
    • 3.176 mm(5)
    • 3.2 mm(5)
    • 3.276 mm(5)
    • 3.301 mm(5)
    • 3.401 mm(5)
    • 3.45 mm(5)
    • 3.5 mm(5)
    • 3.575 mm(5)
    • 3.6 mm(5)
    • 3.651 mm(5)
    • 3.7 mm(5)
    • 3.725 mm(5)
    • 3.801 mm(5)
    • 3.901 mm(5)
    • 3.975 mm(5)
    • 4.0 mm(5)
    • 4.05 mm(5)
    • 4.101 mm(10)
    • 4.2 mm(5)
    • 4.226 mm(5)
    • 4.3 mm(5)
    • 4.375 mm(5)
    • 4.4 mm(5)
    • 4.5 mm(5)
    • 4.601 mm(5)
    • 4.625 mm(5)
    • 4.7 mm(5)
    • 4.775 mm(5)
    • 4.801 mm(5)
    • 4.851 mm(5)
    • 4.9 mm(5)
    • 5.0 mm(5)
    • 5.101 mm(10)
    • 5.15 mm(5)
    • 5.2 mm(5)
    • 5.301 mm(5)
    • 5.4 mm(10)
    • 5.5 mm(5)
    • 5.551 mm(5)
    • 5.601 mm(5)
    • 5.625 mm(5)
    • 5.7 mm(5)
    • 5.801 mm(5)
    • 5.9 mm(5)
    • 5.95 mm(5)
    • 6.0 mm(5)
    • 6.101 mm(5)
    • 6.2 mm(5)
    • 6.301 mm(5)
    • 6.351 mm(5)
    • 6.4 mm(5)
    • 6.5 mm(5)
    • 6.525 mm(5)
    • 6.601 mm(5)
    • 6.625 mm(5)
    • 6.7 mm(5)
    • 6.75 mm(5)
    • 6.801 mm(5)
    • 6.9 mm(5)
    • 7.0 mm(5)
    • 7.101 mm(5)
    • 7.15 mm(5)
    • 7.2 mm(5)
    • 7.301 mm(5)
    • 7.4 mm(5)
    • 7.5 mm(5)
    • 7.551 mm(5)
    • 7.601 mm(5)
    • 7.7 mm(5)
    • 7.801 mm(5)
    • 7.9 mm(5)
    • 7.95 mm(5)
    • 8.0 mm(5)
    • 8.1 mm(5)
    • 8.201 mm(5)
    • 8.3 mm(5)
    • 8.326 mm(5)
    • 8.4 mm(5)
    • 8.425 mm(5)
    • 8.5 mm(5)
    • 8.6 mm(5)
    • 8.701 mm(5)
    • 8.725 mm(5)
    • 8.8 mm(5)
    • 8.9 mm(5)
    • 9.0 mm(5)
    • 9.1 mm(5)
    • 9.125 mm(5)
    • 9.201 mm(5)
    • 9.3 mm(5)
    • 9.35 mm(5)
    • 9.4 mm(5)
    • 9.5 mm(5)
    • 9.525 mm(5)
    • 9.601 mm(5)
    • 9.701 mm(5)
    • 9.8 mm(5)
    • 9.9 mm(5)
    • 9.925 mm(5)
    • 10.0 mm(5)
    • 10.101 mm(5)
    • 10.201 mm(5)
    • 10.3 mm(5)
    • 10.326 mm(5)
    • 10.4 mm(5)
    • 10.5 mm(5)
    • 10.601 mm(5)
    • 10.701 mm(5)
    • 10.726 mm(5)
    • 10.8 mm(5)
    • 10.9 mm(5)
    • 11.0 mm(5)
    • 11.101 mm(5)
    • 11.125 mm(5)
    • 11.201 mm(5)
    • 11.3 mm(5)
    • 11.4 mm(5)
    • 11.5 mm(10)
    • 11.601 mm(5)
    • 11.701 mm(5)
    • 11.8 mm(5)
    • 11.9 mm(10)
    • 12.0 mm(5)
    • 12.101 mm(5)
    • 12.201 mm(5)
    • 12.3 mm(10)
    • 12.4 mm(5)
    • 12.5 mm(5)
    • 12.601 mm(5)
    • 12.701 mm(5)
    • 12.8 mm(5)
    • 12.9 mm(5)
    • 13.0 mm(5)
    • 13.101 mm(10)
    • 13.201 mm(5)
    • 13.3 mm(5)
    • 13.4 mm(5)
    • 13.5 mm(5)
    • 13.601 mm(5)
    • 13.701 mm(5)
    • 13.8 mm(5)
    • 13.9 mm(9)
    • 14.0 mm(5)
    • 14.101 mm(5)
    • 14.201 mm(5)
    • 14.3 mm(10)
    • 14.4 mm(5)
    • 14.5 mm(5)
    • 14.601 mm(5)
    • 14.675 mm(5)
    • 14.701 mm(5)
    • 14.8 mm(5)
    • 14.9 mm(5)
    • 15.0 mm(5)
    • 15.076 mm(5)
    • 15.101 mm(5)
    • 15.201 mm(5)
    • 15.3 mm(5)
    • 15.4 mm(5)
    • 15.476 mm(5)
    • 15.5 mm(5)
    • 15.601 mm(5)
    • 15.701 mm(5)
    • 15.8 mm(5)
    • 15.875 mm(5)
    • 15.9 mm(5)
    • 16.0 mm(5)
    • 16.1 mm(5)
    • 16.2 mm(5)
    • 16.276 mm(5)
    • 16.3 mm(5)
    • 16.401 mm(4)
    • 16.5 mm(5)
    • 16.6 mm(5)
    • 16.675 mm(5)
    • 16.7 mm(4)
    • 16.8 mm(5)
    • 16.901 mm(4)
    • 17.0 mm(5)
    • 17.1 mm(5)
    • 17.2 mm(5)
    • 17.3 mm(5)
    • 17.401 mm(5)
    • 17.475 mm(5)
    • 17.5 mm(5)
    • 17.6 mm(5)
    • 17.7 mm(5)
    • 17.8 mm(5)
    • 17.85 mm(2)
    • 17.901 mm(2)
    • 18.0 mm(5)
    • 18.1 mm(5)
    • 18.2 mm(5)
    • 18.25 mm(5)
    • 18.3 mm(4)
    • 18.401 mm(4)
    • 18.5 mm(5)
    • 18.6 mm(4)
    • 18.651 mm(4)
    • 18.7 mm(5)
    • 18.8 mm(5)
    • 18.901 mm(4)
    • 19.0 mm(5)
    • 19.05 mm(5)
    • 19.1 mm(5)
    • 19.201 mm(5)
    • 19.3 mm(5)
    • 19.401 mm(5)
    • 19.5 mm(5)
    • 19.6 mm(4)
    • 19.701 mm(4)
    • 19.8 mm(5)
    • 19.901 mm(5)
    • 20.0 mm(5)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 5.0 mm(13)
    • 6.0 mm(23)
    • 9.0 mm(10)
    • 10.0 mm(21)
    • 12.0 mm(32)
    • 14.0 mm(40)
    • 15.0 mm(5)
    • 17.0 mm(64)
    • 20.0 mm(42)
    • 22.0 mm(5)
    • 23.0 mm(30)
    • 24.0 mm(28)
    • 25.0 mm(16)
    • 29.0 mm(58)
    • 33.0 mm(15)
    • 35.0 mm(96)
    • 40.0 mm(50)
    • 41.0 mm(16)
    • 43.0 mm(99)
    • 45.0 mm(50)
    • 48.0 mm(21)
    • 49.0 mm(54)
    • 51.0 mm(46)
    • 55.0 mm(46)
    • 56.0 mm(50)
    • 57.0 mm(14)
    • 60.0 mm(46)
    • 63.0 mm(50)
    • 64.0 mm(13)
    • 71.0 mm(43)
    • 77.0 mm(39)
    • 80.0 mm(27)
    • 96.0 mm(25)
    • 112.0 mm(23)
    • 128.0 mm(25)
    • 144.0 mm(22)
    • 160.0 mm(23)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.197 in(13)
    • 0.237 in(23)
    • 0.354 in(10)
    • 0.394 in(21)
    • 0.473 in(32)
    • 0.551 in(40)
    • 0.591 in(5)
    • 0.669 in(64)
    • 0.787 in(42)
    • 0.866 in(5)
    • 0.906 in(30)
    • 0.946 in(28)
    • 0.984 in(16)
    • 1.143 in(58)
    • 1.299 in(15)
    • 1.379 in(96)
    • 1.575 in(50)
    • 1.614 in(16)
    • 1.693 in(99)
    • 1.772 in(50)
    • 1.891 in(21)
    • 1.929 in(54)
    • 2.008 in(46)
    • 2.165 in(46)
    • 2.205 in(50)
    • 2.244 in(14)
    • 2.362 in(46)
    • 2.48 in(50)
    • 2.52 in(13)
    • 2.795 in(43)
    • 3.031 in(39)
    • 3.15 in(27)
    • 3.781 in(25)
    • 4.409 in(23)
    • 5.039 in(25)
    • 5.67 in(22)
    • 6.299 in(23)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.276 in(13)
    • 0.354 in(23)
    • 0.473 in(21)
    • 0.512 in(10)
    • 0.669 in(32)
    • 0.709 in(15)
    • 0.787 in(30)
    • 0.866 in(32)
    • 0.946 in(32)
    • 1.024 in(5)
    • 1.102 in(72)
    • 1.181 in(16)
    • 1.339 in(28)
    • 1.417 in(32)
    • 1.575 in(15)
    • 1.614 in(26)
    • 1.732 in(42)
    • 1.85 in(54)
    • 1.929 in(16)
    • 2.087 in(54)
    • 2.165 in(50)
    • 2.205 in(21)
    • 2.362 in(45)
    • 2.402 in(54)
    • 2.559 in(50)
    • 2.638 in(14)
    • 2.795 in(50)
    • 2.874 in(46)
    • 2.914 in(13)
    • 3.031 in(46)
    • 3.11 in(46)
    • 3.269 in(50)
    • 3.622 in(27)
    • 3.661 in(43)
    • 3.976 in(39)
    • 4.331 in(25)
    • 5.039 in(23)
    • 5.748 in(25)
    • 6.417 in(22)
    • 7.126 in(23)
    Reach MintoReach Max
    Reach
    Reach
    • 7.0 mm(13)
    • 9.0 mm(23)
    • 12.0 mm(21)
    • 13.0 mm(10)
    • 17.0 mm(32)
    • 18.0 mm(15)
    • 20.0 mm(30)
    • 22.0 mm(32)
    • 24.0 mm(32)
    • 26.0 mm(5)
    • 28.0 mm(72)
    • 30.0 mm(16)
    • 34.0 mm(28)
    • 36.0 mm(32)
    • 40.0 mm(15)
    • 41.0 mm(26)
    • 44.0 mm(42)
    • 47.0 mm(54)
    • 49.0 mm(16)
    • 53.0 mm(54)
    • 55.0 mm(50)
    • 56.0 mm(21)
    • 60.0 mm(45)
    • 61.0 mm(54)
    • 65.0 mm(50)
    • 67.0 mm(14)
    • 71.0 mm(50)
    • 73.0 mm(46)
    • 74.0 mm(13)
    • 77.0 mm(46)
    • 79.0 mm(46)
    • 83.0 mm(50)
    • 92.0 mm(27)
    • 93.0 mm(43)
    • 101.0 mm(39)
    • 110.0 mm(25)
    • 128.0 mm(23)
    • 146.0 mm(25)
    • 163.0 mm(22)
    • 181.0 mm(23)
    Reach MintoReach Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.283 in(146)
    • 2.441 in(30)
    • 2.598 in(125)
    • 2.914 in(32)
    • 3.071 in(15)
    • 3.11 in(54)
    • 3.228 in(42)
    • 3.426 in(16)
    • 3.504 in(54)
    • 3.583 in(54)
    • 3.701 in(21)
    • 4.016 in(50)
    • 4.055 in(54)
    • 4.134 in(14)
    • 4.213 in(45)
    • 4.449 in(13)
    • 4.529 in(50)
    • 4.646 in(50)
    • 4.843 in(46)
    • 4.882 in(46)
    • 5.157 in(46)
    • 5.236 in(50)
    • 5.315 in(27)
    • 5.63 in(43)
    • 6.024 in(39)
    • 6.22 in(25)
    • 6.929 in(23)
    • 7.756 in(25)
    • 8.425 in(22)
    • 9.214 in(23)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 58.0 mm(146)
    • 62.0 mm(30)
    • 66.0 mm(125)
    • 74.0 mm(32)
    • 78.0 mm(15)
    • 79.0 mm(54)
    • 82.0 mm(42)
    • 87.0 mm(16)
    • 89.0 mm(54)
    • 91.0 mm(54)
    • 94.0 mm(21)
    • 102.0 mm(50)
    • 103.0 mm(54)
    • 105.0 mm(14)
    • 107.0 mm(45)
    • 113.0 mm(13)
    • 115.0 mm(50)
    • 118.0 mm(50)
    • 123.0 mm(46)
    • 124.0 mm(46)
    • 131.0 mm(46)
    • 133.0 mm(50)
    • 135.0 mm(27)
    • 143.0 mm(43)
    • 153.0 mm(39)
    • 158.0 mm(25)
    • 176.0 mm(23)
    • 197.0 mm(25)
    • 214.0 mm(22)
    • 234.0 mm(23)
    Over All Length [L] MintoOver All Length [L] Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(167)
    • 6.0 mm(260)
    • 8.0 mm(135)
    • 10.0 mm(135)
    • 12.0 mm(125)
    • 14.0 mm(114)
    • 16.0 mm(125)
    • 18.0 mm(111)
    • 20.0 mm(108)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.157 in(167)
    • 0.237 in(260)
    • 0.315 in(135)
    • 0.394 in(135)
    • 0.473 in(125)
    • 0.551 in(114)
    • 0.63 in(125)
    • 0.709 in(111)
    • 0.787 in(108)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?