Downloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5538600 |
| Ref. ISO Catalogue | TCF080308DPV34 |
| Ref. ANSI Catalogue | TCF080308DPV34 |
| Nuance | WPK10CH |
| [D] Taille de plaquette CI | 8.08 mm |
| [D] Taille de plaquette CI | .318 in |
| [D1] Taille du trou de la plaquette | 2.8 mm |
| [D1] Taille du trou de la plaquette | .11 in |
| [W] Largeur de coupe | 8.6 mm |
| [W] Largeur de coupe | .339 in |
| [S] Épaisseur de la plaquette | 3 mm |
| [S] Épaisseur de la plaquette | .118 in |
| [RR] Rayon de bec | 0.8 mm |
| [RR] Rayon de bec | .031 in |
| Dimension de plaquette | D |
Grades
WPK10CH
材质结构：采用先进的 CVD TiCN-Al2O3 涂层以及富钴硬质合金基体，平衡了抗变形能力和刀刃韧性。
应用：在高速加工钢和铸铁材料时，可提供出色的耐磨性和防月牙洼磨损能力。适用于低进给率至中等进给率下的特高速切削。
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Groupe Matières | Géométrie | Travaux légers | Applications générales | Travaux lourds | |||
| Plaquette périphérique | Plaquette centrale | Plaquette périphérique | Plaquette centrale | Plaquette périphérique | Plaquette centrale | ||
| P1 | V38/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P2–P4 | V34/DU | WPK10CH | WU40PH/WU20PH | WU25CH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P5–P6 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| M1–M3 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| K1–K3 | V34/DU | WPK10CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| N1–N4 | V36 | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH |
| S1–S4 | V38/DU | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | |||||||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| –V38 | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/tr | – | – | 0,07–0,10 | 0,08–0,10 | |
| –V38 | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/tr | – | – | 0,07–0,11 | 0,08–0,11 | |
| –V34 | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | – | – | 0,07–0,12 | 0,08–0,13 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/tr | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/tr | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/tr | – | – | 0,06–0,09 | 0,07–0,10 | |
| –V38 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | |||||||
| –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/tr | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/tr | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/tr | – | – | 0,07–0,13 | 0,09–0,18 | |
| –V34 | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/tr | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/tr | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/tr | – | – | 0,07–0,11 | 0,09–0,14 | |
| –V38 | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 | |||||||
| –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/tr | – | – | 0,07–0,11 | 0,09–0,14 | |
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | |||||||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| –V38 | 0,13–0,16 | 0,15–0,18 | 0,16–0,23 | 0,17–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/tr | 0,09–0,12 | 0,11–0,13 | – | – | |
| –V38 | 0,13–0,17 | 0,15–0,19 | 0,16–0,24 | 0,17–0,25 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/tr | 0,09–0,13 | 0,11–0,14 | – | – | |
| –V34 | 0,13–0,20 | 0,15–0,21 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | 0,09–0,15 | 0,11–0,15 | – | – | |
| –V34 | 0,16–0,24 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 250 | mm/tr | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V34 | 0,14–0,22 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 250 | mm/tr | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/tr | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,29 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 160 | mm/tr | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 190 | mm/tr | 0,09–0,13 | 0,10–0,15 | – | – | |
| –V38 | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 110 | 160 | mm/tr | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 90 | 160 | mm/tr | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/tr | 0,10–0,19 | 0,12–0,22 | – | – | |
| –V34 | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/tr | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 130 | 190 | mm/tr | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | ||||||||
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 25 | 40 | mm/tr | 0,10–0,15 | 0,12–0,18 | – | – | |
| –V38 | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | |||||||
| –DU | WU20PH | WU20PH | 30 | 35 | 50 | mm/tr | 0,10–0,15 | 0,12–0,18 | – | – | |
| Avanzamento al giro consigliato | |||||||||||
| Nuance | Vitesse de coupe | ||||||||||
| Groupe Matières | Géométrie | Inter | Exter | Mini | Départ | Maxi | Diamètre d'outil | 12,00 | 14,00 | 19,00 | 24,00 |
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| P0 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.10 | 0.08–0.10 |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| P1 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.11 | 0.08–0.11 |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| P2 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.12 | 0.08–0.13 |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P3 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P4 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P5 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P6 | –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M1 | –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M2 | –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M3 | –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K1 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K2 | –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K3 | –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| S3 | –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| S4 | –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| dimension de la plaquette | Plage de diamètres mm (in) | 2 x D/3 x D | 4 x D | 5 x D | ||||||
| Valeur du déport X maxi en mm (maxi en Inch) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Inch) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Inch) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | ||
| A | 12,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 37,00 | 0,8 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | 1 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | 1 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| dimension de la plaquette | Plage de diamètres (mm) | 2 x D et 3 x D | 4 x D | 5 x D | |||
| valeur du déport X | valeur de | valeur du déport X | valeur de | valeur du déport | valeur de | ||
| A | 12,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| B | 14,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| C | 19,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| G | 46,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| H | 57,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| dimension de la plaquette | Plage de diamètres mm (in) | 2 x D/3 x D | 4 x D | 5 x D | |||||
| D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Pouces) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Pouces) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | ||
| A | 12,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | 1,188 | 1,469 | 1,813 | 2,250 | |||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0,0053 | 0,0063 | 0,0071 | 0,0075 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0075 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| Avance par tour recommandée | |||||||||||
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | 0,473 | 0,563 | 0,750 | 0,969 | |||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| Recommended Feed Rate per Revolution | |||||||||||
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | .473 | .563 | .750 | .969 | |||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?