Planeado
Ranurado: Placa cuadrada
Fresado lateral/Fresado en escuadra: Nariz de bola
Perfilado 3D
Fresado — Con refrigeración interna
Fresado — lateral y planeado
Mecanizado de alojamientosDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 5210213 |
| Referencia ISO | M200D66Z05RN16 |
| Referencia ANSI | M200D66Z05RN16 |
| Diámetro de corte máximo [D1MAX] | 66 mm |
| Diámetro de corte máximo [D1MAX] | 2.598 in |
| Diámetro de corte efectivo [D1] | 50 mm |
| Diámetro de corte efectivo [D1] | 1.969 in |
| Adaptador/Mango/Diá int [D] | 27 mm |
| Adaptador/Mango/Diá int [D] | 1.063 in |
| Diámetro de núcleo [D6] | 60 mm |
| Diámetro de núcleo [D6] | 2.362 in |
| Longitud total [L] | 50 mm |
| Longitud total [L] | 1.969 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 3.97 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | .156 in |
| Número de plaquitas | 5 |
| Ángulo de vaciado máximo | 0.38 |
| RPM máx. | 22000 |
| Suministro de refrigerante | Y |
| Peso en kilogramos | 0.69 |
PlaneadoRanurado: Placa cuadradaFresado lateral/Fresado en escuadra: Nariz de bolaPerfilado 3DFresado — Con refrigeración internaFresado — lateral y planeadoMecanizado de alojamientosCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | ML | WP25PM | MM | WP40PM | MM | WP40PM |
| P3–P4 | ML | WP25PM | MM | WP25PM | MH | WP40PM |
| P5–P6 | ML | WP35CM | MM | WP35CM | MH | WP35CM |
| M1–M2 | ML | WP25PM | ML | WU35PM | MM | WU35PM |
| M3 | ML | WP25PM | MM | WU35PM | MM | WU35PM |
| K1–K2 | MH | WK15CM | MH | WK15CM | MH | WP20CM |
| K3 | MH | WK15CM | MH | WP20CM | MH | WP35CM |
| N1–N2 | ALP | WN25PM | ALP | WN25PM | ALP | WN25PM |
| N3 | ALP | WN25PM | ALP | WN25PM | ALP | WN25PM |
| S1–S2 | ML | WS30PM | ML | WS30PM | ML | WU35PM |
| S3 | ML | WS30PM | ML | WU35PM | ML | WU35PM |
| S4 | ML | WS30PM | ML | WU35PM | ML | WU35PM |
| H1 | MH | WP25PM | MH | WP20CM | – | – |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,12 | 0,37 | 0,48 | 0,09 | 0,27 | 0,35 | 0,07 | 0,20 | 0,26 | 0,06 | 0,17 | 0,23 | 0,05 | 0,16 | 0,21 | ML |
| MM | 0,28 | 0,70 | 0,81 | 0,21 | 0,50 | 0,58 | 0,15 | 0,38 | 0,44 | 0,13 | 0,33 | 0,38 | 0,12 | 0,30 | 0,35 | MM |
| MH | 0,53 | 0,70 | 1,17 | 0,38 | 0,50 | 0,84 | 0,29 | 0,38 | 0,63 | 0,25 | 0,33 | 0,55 | 0,23 | 0,30 | 0,50 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,14 | 0,43 | 0,56 | 0,10 | 0,31 | 0,40 | 0,08 | 0,23 | 0,30 | 0,07 | 0,20 | 0,26 | 0,06 | 0,18 | 0,24 | ML |
| MM | 0,33 | 0,81 | 0,94 | 0,24 | 0,58 | 0,67 | 0,18 | 0,43 | 0,50 | 0,16 | 0,38 | 0,44 | 0,14 | 0,35 | 0,40 | MM |
| MH | 0,62 | 0,81 | 1,36 | 0,44 | 0,58 | 0,97 | 0,33 | 0,43 | 0,72 | 0,29 | 0,38 | 0,63 | 0,27 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,26 | 0,77 | 1,01 | 0,19 | 0,55 | 0,73 | 0,14 | 0,41 | 0,54 | 0,12 | 0,36 | 0,47 | 0,11 | 0,33 | 0,43 | ML |
| MM | 0,59 | 1,46 | 1,70 | 0,43 | 1,04 | 1,21 | 0,32 | 0,78 | 0,90 | 0,28 | 0,68 | 0,79 | 0,25 | 0,62 | 0,72 | MM |
| MH | 1,11 | 1,46 | 2,48 | 0,80 | 1,04 | 1,75 | 0,60 | 0,78 | 1,30 | 0,52 | 0,68 | 1,13 | 0,48 | 0,62 | 1,03 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,19 | 0,56 | 0,73 | 0,14 | 0,40 | 0,53 | 0,10 | 0,30 | 0,40 | 0,09 | 0,26 | 0,34 | 0,08 | 0,24 | 0,32 | ML |
| MM | 0,43 | 1,06 | 1,24 | 0,31 | 0,76 | 0,89 | 0,23 | 0,57 | 0,66 | 0,20 | 0,50 | 0,57 | 0,19 | 0,45 | 0,53 | MM |
| MH | 0,81 | 1,06 | 1,79 | 0,58 | 0,76 | 1,28 | 0,44 | 0,57 | 0,95 | 0,38 | 0,50 | 0,83 | 0,35 | 0,45 | 0,76 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .005 | .015 | .019 | .004 | .011 | .014 | .003 | .008 | .010 | .002 | .007 | .009 | .002 | .006 | .008 | ML |
| MM | .011 | .027 | .032 | .008 | .020 | .023 | .006 | .015 | .017 | .005 | .013 | .015 | .005 | .012 | .014 | MM |
| MH | .021 | .027 | .046 | .015 | .020 | .033 | .011 | .015 | .025 | .010 | .013 | .021 | .009 | .012 | .020 | MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .006 | .017 | .022 | .004 | .012 | .016 | .003 | .009 | .012 | .003 | .008 | .010 | .002 | .007 | .010 | ML |
| MM | .013 | .032 | .037 | .009 | .023 | .026 | .007 | .017 | .020 | .006 | .015 | .017 | .006 | .014 | .016 | MM |
| MH | .024 | .032 | .053 | .018 | .023 | .038 | .013 | .017 | .029 | .011 | .015 | .025 | .010 | .014 | .023 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .010 | .030 | .040 | .007 | .022 | .029 | .005 | .016 | .021 | .005 | .014 | .019 | .004 | .013 | .017 | ML |
| MM | .023 | .058 | .067 | .017 | .041 | .047 | .012 | .031 | .035 | .011 | .027 | .031 | .010 | .024 | .028 | MM |
| MH | .044 | .058 | .098 | .031 | .041 | .069 | .023 | .031 | .051 | .020 | .027 | .044 | .019 | .024 | .041 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .007 | .022 | .029 | .005 | .016 | .021 | .004 | .012 | .016 | .003 | .010 | .014 | .003 | .010 | .012 | ML |
| MM | .017 | .042 | .048 | .012 | .030 | .035 | .009 | .022 | .026 | .008 | .019 | .022 | .007 | .018 | .021 | MM |
| MH | .032 | .042 | .071 | .023 | .030 | .050 | .017 | .022 | .037 | .015 | .019 | .033 | .014 | .018 | .030 | MH |
| Material Group | WK15CM | WK15PM | WN25PM | WP20CM | WP25PM | |||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 660 | 580 | 540 | 395 | 340 | 325 |
| 2 | – | – | – | – | – | – | – | – | – | 410 | 370 | 330 | 330 | 290 | 240 | |
| 3 | – | – | – | – | – | – | – | – | – | 370 | 330 | 305 | 305 | 260 | 210 | |
| 4 | – | – | – | – | – | – | – | – | – | 275 | 260 | 230 | 270 | 220 | 180 | |
| 5 | – | – | – | – | – | – | – | – | – | 330 | 300 | 275 | 220 | 205 | 180 | |
| 6 | – | – | – | – | – | – | – | – | – | 230 | 205 | 175 | 200 | 150 | 120 | |
| M | 1 | – | – | – | – | – | – | – | – | – | 270 | 240 | 210 | 245 | 215 | 200 |
| 2 | – | – | – | – | – | – | – | – | – | 245 | 210 | 190 | 220 | 190 | 155 | |
| 3 | – | – | – | – | – | – | – | – | – | 190 | 175 | 150 | 170 | 145 | 115 | |
| K | 1 | 505 | 460 | 410 | 400 | 290 | 215 | – | – | – | 430 | 390 | 355 | 275 | 245 | 220 |
| 2 | 400 | 355 | 330 | 350 | 235 | 170 | – | – | – | 340 | 305 | 280 | 215 | 190 | 180 | |
| 3 | 335 | 300 | 275 | 280 | 245 | 165 | – | – | – | 290 | 260 | 240 | 180 | 160 | 145 | |
| N | 1 | – | – | – | – | – | – | 1290 | 1135 | 1050 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 1135 | 1050 | 910 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 1135 | 1050 | 910 | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 60 | 50 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 85 | 60 | 40 | |
| H | 1 | – | – | – | – | – | – | – | – | – | 170 | 140 | 115 | 145 | 110 | 85 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP35CM | WP40PM | WS30PM | WS40PM | WU35PM | |||||||||||
| P | 1 | 545 | 475 | 445 | 355 | 310 | 295 | 445 | 385 | 360 | 280 | 245 | 230 | 310 | 275 | 260 |
| 2 | 335 | 305 | 275 | 300 | 260 | 215 | 365 | 325 | 265 | 235 | 205 | 170 | 265 | 230 | 190 | |
| 3 | 305 | 275 | 245 | 275 | 235 | 190 | 340 | 290 | 235 | 215 | 185 | 150 | 240 | 205 | 170 | |
| 4 | 230 | 210 | 190 | 245 | 205 | 160 | 300 | 245 | 200 | 195 | 160 | 130 | 215 | 180 | 145 | |
| 5 | 310 | 275 | 250 | 205 | 185 | 160 | 245 | 230 | 200 | 160 | 140 | 130 | 180 | 160 | 145 | |
| 6 | 190 | 160 | 130 | 180 | 140 | 110 | 220 | 170 | 130 | 140 | 110 | 85 | 155 | 120 | 95 | |
| M | 1 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 260 | 190 | 115 | 205 | 180 | 160 |
| 2 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 230 | 170 | 105 | 185 | 155 | 130 | |
| 3 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 190 | 140 | 80 | 140 | 120 | 95 | |
| K | 1 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | 1075 | 945 | 945 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 945 | 875 | 845 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 875 | 760 | 760 | – | – | – | |
| S | 1 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 62 | 45 | 27 | 40 | 35 | 30 |
| 2 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 55 | 40 | 26 | 40 | 35 | 30 | |
| 3 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 64 | 46 | 29 | 55 | 40 | 30 | |
| 4 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 90 | 66 | 42 | 70 | 55 | 35 | |
| H | 1 | – | – | – | – | – | – | 160 | 120 | 90 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WK15CM | WN25PM | WP20CM | WP25PM | WP35CM | WP40PM | WS30PM | WU35PM | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | 2165 | 1910 | 1770 | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 | 1460 | 1260 | 1180 | 1025 | 905 | 845 |
| 2 | – | – | – | – | – | – | 1340 | 1220 | 1080 | 1080 | 940 | 785 | 1105 | 1000 | 905 | 985 | 845 | 710 | 1200 | 1060 | 865 | 865 | 750 | 630 | |
| 3 | – | – | – | – | – | – | 1220 | 1080 | 1000 | 1000 | 845 | 690 | 1000 | 905 | 805 | 905 | 770 | 630 | 1120 | 940 | 770 | 785 | 670 | 550 | |
| 4 | – | – | – | – | – | – | 905 | 845 | 750 | 890 | 725 | 590 | 750 | 690 | 630 | 805 | 670 | 535 | 985 | 805 | 650 | 710 | 590 | 475 | |
| 5 | – | – | – | – | – | – | 1080 | 985 | 905 | 725 | 670 | 590 | 1025 | 905 | 830 | 670 | 610 | 535 | 805 | 750 | 650 | 590 | 535 | 475 | |
| 6 | – | – | – | – | – | – | 750 | 670 | 570 | 650 | 490 | 395 | 630 | 535 | 430 | 590 | 450 | 355 | 725 | 550 | 430 | 510 | 395 | 310 | |
| M | 1 | – | – | – | – | – | – | 890 | 785 | 690 | 805 | 710 | 650 | 805 | 725 | 610 | 770 | 670 | 610 | 890 | 785 | 725 | 670 | 590 | 535 |
| 2 | – | – | – | – | – | – | 805 | 690 | 630 | 725 | 630 | 510 | 725 | 630 | 550 | 690 | 590 | 490 | 805 | 710 | 570 | 610 | 510 | 430 | |
| 3 | – | – | – | – | – | – | 630 | 570 | 490 | 550 | 475 | 370 | 570 | 510 | 450 | 510 | 450 | 355 | 610 | 535 | 415 | 450 | 395 | 310 | |
| K | 1 | 1655 | 1520 | 1340 | – | – | – | 1415 | 1280 | 1165 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – |
| 2 | 1320 | 1165 | 1080 | – | – | – | 1120 | 1000 | 925 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | |
| 3 | 1105 | 985 | 905 | – | – | – | 940 | 845 | 785 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | 4230 | 3720 | 3445 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | 3720 | 3445 | 2995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | 3720 | 3445 | 2995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 140 | 120 | 95 |
| 2 | – | – | – | – | – | – | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 140 | 120 | 95 | |
| 3 | – | – | – | – | – | – | – | – | – | 200 | 155 | 95 | – | – | – | 200 | 155 | 120 | 215 | 180 | 120 | 180 | 140 | 95 | |
| 4 | – | – | – | – | – | – | – | – | – | 275 | 200 | 140 | 260 | 200 | 130 | 260 | 200 | 140 | 335 | 235 | 155 | 235 | 180 | 120 | |
| H | 1 | – | – | – | – | – | – | 550 | 450 | 370 | 475 | 355 | 275 | – | – | – | – | – | – | 535 | 395 | 295 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?