Search results for
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1352)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1352)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1352)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1352)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1352)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1352)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1352)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1352)
- M Stainless Steel (1350)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1350)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1350)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1350)
- K Cast Iron (1349)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1349)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1349)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1348)
- N Non-Ferrous Materials (1334)
- N1Wrought Aluminum (1333)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1334)
- N3High-Silicon Aluminum Alloys Si >12.2%(1333)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (131)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1334)
- N6Carbon, Graphite Composites, CFRP (1334)
- N7MMC's (131)
- S High-Temp Alloys (1342)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1342)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1342)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1342)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1342)
- H Hardened Materials (587)
- H1Hardened Materials 44-48 HRC(587)
- H2Hardened Materials 48-55 HRC(587)
- H3Hardened Materials 56-60 HRC(100)
- H4Hardened Materials >60 HRC(100)
Select All Star
- CN (132)
- DE (273)
- GB (19)
- IN (78)
- SG (64)
- US (398)
Applications
Applications
Back Boring (54)
Boring (12)
Chamfer Turning (36)
Cut-Off (487)
Deep Grooving (55)
Face Grooving (726)
Facing (124)
Grooving (969)
ID Facing (86)
ID Grooving (619)
ID Thread Turning (44)
Multiple Direction Cutting (20)
OD Thread Turning (67)
Plunge Turning (347)
Profiling (239)
Turning (151)
Type of Thread
Type of Thread
- 60 (107)
- ACME (66)
- API RD (45)
- BSW (23)
- BUTTRESS (22)
- STUB ACME (45)
- UN (93)
- UNJ (23)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1147)
- Lightly Interrupted Cut (1149)
- Smooth Cut (1091)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (640)
to
Connection Style
Connection Style
- Boring Bar Shank (106)
- Cutoff Support Blade A1-A3 (15)
- Toolholder (416)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (578)
- 2.0 (823)
- 3.0 (3)
to
Over All Length [L]
Over All Length [L]
- 1.881 in(10)
- 1.954 in(4)
- 1.978 in(1)
- 1.998 in(2)
- 2.037 in(4)
- 2.136 in(2)
- 2.176 in(2)
- 2.215 in(14)
- 2.254 in(2)
- 2.274 in(4)
- 2.301 in(4)
- 2.347 in(4)
- 2.362 in(2)
- 2.372 in(10)
- 2.411 in(2)
- 2.431 in(2)
- 2.5 in(1)
- 2.551 in(8)
- 2.584 in(2)
- 2.668 in(4)
- 3.15 in(1)
- 3.386 in(1)
- 3.5 in(1)
- 3.553 in(3)
- 3.938 in(15)
- 4.0 in(2)
- 4.252 in(1)
- 4.271 in(2)
- 4.3 in(2)
- 4.331 in(3)
- 4.341 in(5)
- 4.5 in(58)
- 4.771 in(2)
- 4.921 in(71)
- 4.961 in(3)
- 5.0 in(42)
- 5.021 in(10)
- 5.05 in(4)
- 5.39 in(2)
- 5.463 in(2)
- 5.5 in(2)
- 5.508 in(6)
- 5.513 in(2)
- 5.64 in(3)
- 5.771 in(1)
- 5.906 in(104)
- 5.915 in(10)
- 5.961 in(10)
- 5.974 in(3)
- 6.0 in(111)
- 6.005 in(8)
- 6.25 in(2)
- 6.694 in(26)
- 6.703 in(2)
- 7.0 in(14)
- 7.021 in(3)
- 7.087 in(6)
- 7.875 in(23)
- 8.0 in(13)
- 9.843 in(10)
- 10.0 in(12)
- 10.236 in(1)
- 11.811 in(6)
- 11.817 in(1)
- 12.0 in(9)
- 13.781 in(1)
- 14.0 in(7)
- 16.0 in(4)
to
Over All Length [L]
Over All Length [L]
- 47.75 mm(10)
- 49.625 mm(4)
- 50.25 mm(1)
- 50.75 mm(2)
- 51.75 mm(4)
- 54.25 mm(2)
- 55.25 mm(2)
- 56.25 mm(14)
- 57.25 mm(2)
- 57.75 mm(4)
- 58.426 mm(4)
- 59.625 mm(4)
- 60.0 mm(2)
- 60.25 mm(10)
- 61.25 mm(2)
- 61.75 mm(2)
- 63.5 mm(1)
- 64.775 mm(8)
- 65.625 mm(2)
- 67.75 mm(4)
- 80.0 mm(1)
- 86.0 mm(1)
- 88.9 mm(1)
- 90.25 mm(3)
- 100.0 mm(15)
- 101.601 mm(2)
- 108.0 mm(1)
- 108.45 mm(2)
- 109.226 mm(2)
- 110.0 mm(3)
- 110.25 mm(5)
- 114.301 mm(58)
- 121.15 mm(2)
- 125.0 mm(71)
- 126.0 mm(3)
- 127.0 mm(42)
- 127.5 mm(10)
- 128.275 mm(4)
- 136.9 mm(2)
- 138.75 mm(2)
- 139.701 mm(2)
- 139.9 mm(6)
- 140.0 mm(2)
- 143.25 mm(3)
- 146.55 mm(1)
- 150.0 mm(104)
- 150.25 mm(10)
- 151.4 mm(10)
- 151.75 mm(3)
- 152.4 mm(111)
- 152.5 mm(8)
- 158.75 mm(2)
- 170.0 mm(26)
- 170.25 mm(2)
- 177.8 mm(14)
- 178.3 mm(2)
- 178.326 mm(1)
- 180.0 mm(6)
- 200.0 mm(23)
- 203.201 mm(13)
- 250.0 mm(10)
- 254.0 mm(12)
- 260.0 mm(1)
- 300.0 mm(6)
- 300.151 mm(1)
- 304.8 mm(9)
- 350.0 mm(1)
- 355.6 mm(7)
- 406.401 mm(4)
to
Corner Radius
Corner Radius
- 0.003 in(172)
- 0.004 in(235)
- 0.005 in(23)
- 0.006 in(146)
- 0.007 in(205)
- 0.008 in(515)
- 0.01 in(198)
- 0.012 in(298)
- 0.014 in(157)
- 0.015 in(19)
- 0.016 in(262)
- 0.02 in(43)
- 0.023 in(132)
- 0.024 in(209)
- 0.03 in(222)
- 0.031 in(262)
- 0.039 in(159)
- 0.047 in(137)
- 0.049 in(87)
- 0.06 in(236)
- 0.062 in(49)
- 0.063 in(144)
- 0.069 in(88)
- 0.078 in(48)
- 0.079 in(151)
- 0.08 in(34)
- 0.089 in(65)
- 0.094 in(49)
- 0.095 in(105)
- 0.098 in(83)
- 0.099 in(38)
- 0.119 in(64)
- 0.12 in(33)
- 0.125 in(88)
- 0.156 in(37)
- 0.157 in(37)
- 0.158 in(15)
to
Corner Radius
Corner Radius
- 0.076 mm(172)
- 0.1 mm(235)
- 0.125 mm(23)
- 0.151 mm(146)
- 0.176 mm(205)
- 0.2 mm(515)
- 0.225 mm(80)
- 0.25 mm(196)
- 0.301 mm(298)
- 0.325 mm(157)
- 0.351 mm(45)
- 0.375 mm(19)
- 0.4 mm(262)
- 0.5 mm(43)
- 0.576 mm(132)
- 0.601 mm(209)
- 0.75 mm(222)
- 0.775 mm(149)
- 0.8 mm(161)
- 1.0 mm(159)
- 1.201 mm(137)
- 1.25 mm(87)
- 1.5 mm(233)
- 1.526 mm(58)
- 1.576 mm(49)
- 1.6 mm(144)
- 1.75 mm(88)
- 1.975 mm(48)
- 2.0 mm(151)
- 2.025 mm(34)
- 2.25 mm(65)
- 2.375 mm(49)
- 2.401 mm(105)
- 2.5 mm(83)
- 2.526 mm(38)
- 3.0 mm(64)
- 3.026 mm(33)
- 3.176 mm(88)
- 3.95 mm(37)
- 4.0 mm(37)
- 4.025 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(831)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(831)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (2)
- CW2015 (2)
- CW5025 (2)
- HK1500 (2)
- HK15M (2)
- PB100 (2)
- PB250 (2)
- RC3503 (2)
- SP0A00 (2)
- SPTM00 (2)
- THM (109)
- THM X (1)
- THM-F (2)
- THM-X (2)
- THMF-X (2)
- TN10P (70)
- TN200 (1)
- TN2000 (2)
- TN35 (3)
- TN4000 (2)
- TN5015 (3)
- TN5120 (3)
- TN6010 (231)
- TN6025 (337)
- TN6026 (1)
- TN6030 (2)
- TN7010 (3)
- TN7015 (3)
- TN7025 (3)
- TN7035 (3)
- TN7110 (105)
- TN7115 (3)
- TN7125 (3)
- TN7135 (1)
- TN7525 (9)
- TN7535 (9)
- TN8025 (1)
- TPC25 (1)
- TPC35 (1)
- TTI15 (2)
- TTM (3)
- TTM08 (3)
- TTM09 (7)
- TTMS (2)
- TTR (3)
- TTR-X (3)
- TTS (3)
- TTX (3)
- WBH25U (2)
- WDN25U (3)
- WK20CT (3)
- WM35CT (1)
- WP10CT (216)
- WP15CT (3)
- WP25CT (215)
- WP35CT (3)
- WS25PT (66)
- WU10HT (155)
- WU10PT (512)
- WU25PT (784)
- WU35CT (13)
- WU35PT (141)
Hand Of Tool
Hand Of Tool
- L (237)
- N (19)
- R (281)
Wiper Insert
Wiper Insert
- N (1282)
- Y (155)
F Dimension
F Dimension
- 0.0 mm(3)
- 1.276 mm(2)
- 1.451 mm(2)
- 1.826 mm(3)
- 2.7 mm(2)
- 3.6 mm(1)
- 3.7 mm(2)
- 4.7 mm(1)
- 5.7 mm(1)
- 6.551 mm(2)
- 7.0 mm(2)
- 7.5 mm(2)
- 8.525 mm(2)
- 9.0 mm(2)
- 9.525 mm(7)
- 10.0 mm(6)
- 10.3 mm(1)
- 11.0 mm(8)
- 11.05 mm(4)
- 11.101 mm(2)
- 11.951 mm(2)
- 12.0 mm(12)
- 12.701 mm(17)
- 13.0 mm(6)
- 13.951 mm(2)
- 13.976 mm(2)
- 14.275 mm(3)
- 15.851 mm(4)
- 15.875 mm(13)
- 15.9 mm(1)
- 15.951 mm(2)
- 15.976 mm(4)
- 16.0 mm(20)
- 16.1 mm(2)
- 16.25 mm(2)
- 17.0 mm(10)
- 17.3 mm(6)
- 17.475 mm(4)
- 19.05 mm(23)
- 19.075 mm(6)
- 19.125 mm(14)
- 19.151 mm(2)
- 19.425 mm(1)
- 19.951 mm(2)
- 20.0 mm(23)
- 20.05 mm(6)
- 20.1 mm(14)
- 22.0 mm(2)
- 22.225 mm(2)
- 24.951 mm(1)
- 25.0 mm(45)
- 25.05 mm(6)
- 25.1 mm(18)
- 25.151 mm(2)
- 25.201 mm(4)
- 25.326 mm(2)
- 25.401 mm(27)
- 25.425 mm(7)
- 25.451 mm(1)
- 25.475 mm(18)
- 25.5 mm(5)
- 25.576 mm(4)
- 25.701 mm(2)
- 26.0 mm(8)
- 27.0 mm(3)
- 29.0 mm(15)
- 31.75 mm(20)
- 31.826 mm(8)
- 31.925 mm(4)
- 32.0 mm(16)
- 32.051 mm(4)
- 32.075 mm(8)
- 32.176 mm(4)
- 32.301 mm(7)
- 32.4 mm(2)
- 32.525 mm(1)
- 32.65 mm(2)
- 33.0 mm(3)
- 34.926 mm(2)
- 35.0 mm(1)
- 38.1 mm(4)
- 38.275 mm(2)
- 38.401 mm(2)
- 38.75 mm(2)
- 40.0 mm(2)
- 40.176 mm(2)
- 40.301 mm(2)
- 40.651 mm(2)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.05 in(2)
- 0.057 in(2)
- 0.073 in(3)
- 0.106 in(2)
- 0.143 in(1)
- 0.146 in(2)
- 0.185 in(1)
- 0.224 in(1)
- 0.258 in(2)
- 0.276 in(2)
- 0.295 in(2)
- 0.336 in(2)
- 0.354 in(2)
- 0.375 in(7)
- 0.394 in(6)
- 0.406 in(1)
- 0.433 in(8)
- 0.435 in(4)
- 0.437 in(2)
- 0.472 in(2)
- 0.473 in(12)
- 0.5 in(17)
- 0.512 in(6)
- 0.549 in(2)
- 0.55 in(2)
- 0.562 in(3)
- 0.624 in(4)
- 0.625 in(13)
- 0.626 in(1)
- 0.628 in(2)
- 0.629 in(4)
- 0.63 in(20)
- 0.634 in(2)
- 0.64 in(2)
- 0.669 in(10)
- 0.681 in(6)
- 0.689 in(4)
- 0.75 in(23)
- 0.751 in(6)
- 0.753 in(14)
- 0.754 in(2)
- 0.765 in(1)
- 0.785 in(2)
- 0.787 in(23)
- 0.789 in(6)
- 0.791 in(14)
- 0.866 in(2)
- 0.875 in(2)
- 0.982 in(1)
- 0.984 in(45)
- 0.986 in(6)
- 0.988 in(18)
- 0.99 in(2)
- 0.992 in(4)
- 0.997 in(2)
- 1.0 in(27)
- 1.002 in(8)
- 1.004 in(23)
- 1.008 in(4)
- 1.012 in(2)
- 1.024 in(8)
- 1.063 in(3)
- 1.143 in(15)
- 1.25 in(20)
- 1.254 in(8)
- 1.258 in(4)
- 1.26 in(16)
- 1.262 in(4)
- 1.264 in(8)
- 1.268 in(4)
- 1.272 in(7)
- 1.276 in(2)
- 1.281 in(1)
- 1.285 in(2)
- 1.299 in(3)
- 1.375 in(2)
- 1.379 in(1)
- 1.5 in(4)
- 1.508 in(2)
- 1.512 in(2)
- 1.526 in(2)
- 1.575 in(2)
- 1.582 in(2)
- 1.587 in(2)
- 1.6 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(55)
- 11.175 mm(2)
- 11.5 mm(2)
- 15.875 mm(2)
- 16.0 mm(2)
- 18.5 mm(2)
- 18.55 mm(2)
- 20.0 mm(8)
- 20.326 mm(1)
- 22.0 mm(2)
- 25.0 mm(8)
- 25.401 mm(2)
- 26.0 mm(2)
- 28.576 mm(2)
- 30.0 mm(1)
- 31.75 mm(6)
- 32.0 mm(7)
- 34.0 mm(4)
- 34.926 mm(4)
- 38.0 mm(6)
- 40.401 mm(4)
- 41.0 mm(4)
- 41.301 mm(29)
- 44.0 mm(2)
- 44.45 mm(2)
- 47.0 mm(15)
- 47.6 mm(27)
- 50.801 mm(2)
- 52.0 mm(10)
- 54.0 mm(7)
- 54.1 mm(3)
- 55.875 mm(1)
- 56.625 mm(3)
- 57.151 mm(15)
- 57.2 mm(12)
- 60.325 mm(2)
- 63.5 mm(7)
- 69.851 mm(4)
- 70.0 mm(14)
- 76.2 mm(1)
- 88.9 mm(139)
- 100.0 mm(17)
- 101.601 mm(2)
- 139.701 mm(165)
- 174.601 mm(57)
- 209.601 mm(43)
- 222.3 mm(26)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(55)
- 0.44 in(2)
- 0.453 in(2)
- 0.625 in(2)
- 0.63 in(2)
- 0.728 in(2)
- 0.73 in(2)
- 0.787 in(8)
- 0.8 in(1)
- 0.866 in(2)
- 0.984 in(8)
- 1.0 in(2)
- 1.024 in(2)
- 1.125 in(2)
- 1.181 in(1)
- 1.25 in(6)
- 1.26 in(7)
- 1.339 in(4)
- 1.375 in(4)
- 1.496 in(6)
- 1.591 in(4)
- 1.614 in(4)
- 1.627 in(29)
- 1.732 in(2)
- 1.75 in(2)
- 1.85 in(15)
- 1.874 in(27)
- 2.0 in(2)
- 2.047 in(10)
- 2.126 in(7)
- 2.13 in(3)
- 2.2 in(1)
- 2.229 in(3)
- 2.25 in(15)
- 2.253 in(12)
- 2.375 in(2)
- 2.5 in(7)
- 2.75 in(4)
- 2.757 in(14)
- 3.0 in(1)
- 3.5 in(139)
- 3.938 in(17)
- 4.0 in(2)
- 5.5 in(165)
- 6.875 in(57)
- 8.252 in(43)
- 8.752 in(26)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(19)
- 1.024 in(17)
- 1.062 in(2)
- 1.125 in(2)
- 1.25 in(2)
- 1.26 in(27)
- 2.047 in(8)
- 2.757 in(10)
- 3.938 in(13)
- 4.0 in(2)
- 8.0 in(2)
- 8.071 in(17)
- 16.0 in(12)
- 393.661 in(471)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(19)
- 26.0 mm(17)
- 26.975 mm(2)
- 28.576 mm(2)
- 31.75 mm(2)
- 32.0 mm(27)
- 52.0 mm(8)
- 70.0 mm(10)
- 100.0 mm(13)
- 101.601 mm(2)
- 203.201 mm(2)
- 205.0 mm(17)
- 406.401 mm(12)
- 9999.0 mm(471)
to
Cutting Direction
Cutting Direction
- E (435)
- S (102)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (52)
- NEUTRAL (ZERO) (106)
- POSITIVE-ZERO (44)
Maximum Bore Depth
Maximum Bore Depth
- 0.946 in(2)
- 1.0 in(9)
- 1.23 in(1)
- 1.232 in(1)
- 1.25 in(4)
- 1.26 in(2)
- 1.29 in(1)
- 1.5 in(5)
- 1.575 in(2)
- 1.587 in(2)
- 1.594 in(2)
- 1.891 in(2)
- 1.969 in(10)
- 1.979 in(2)
- 1.98 in(2)
- 2.0 in(19)
- 2.5 in(5)
- 2.52 in(15)
- 2.535 in(2)
- 3.0 in(2)
- 3.15 in(5)
- 3.307 in(2)
- 3.323 in(2)
- 3.938 in(4)
- 4.0 in(6)
- 5.0 in(3)
- 5.039 in(2)
- 6.0 in(2)
- 6.299 in(3)
- 7.0 in(2)
- 7.875 in(1)
- 8.0 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(2)
- 25.401 mm(9)
- 31.25 mm(1)
- 31.3 mm(1)
- 31.75 mm(4)
- 32.0 mm(2)
- 32.775 mm(1)
- 38.1 mm(5)
- 40.0 mm(2)
- 40.301 mm(2)
- 40.5 mm(2)
- 48.0 mm(2)
- 50.0 mm(10)
- 50.276 mm(2)
- 50.301 mm(2)
- 50.801 mm(19)
- 63.5 mm(5)
- 64.0 mm(15)
- 64.4 mm(2)
- 76.2 mm(2)
- 80.0 mm(5)
- 84.0 mm(2)
- 84.4 mm(2)
- 100.0 mm(4)
- 101.601 mm(6)
- 127.0 mm(3)
- 128.0 mm(2)
- 152.4 mm(2)
- 160.0 mm(3)
- 177.8 mm(2)
- 200.0 mm(1)
- 203.201 mm(4)
to
Boring Bar Material
Boring Bar Material
- S (106)
Front-End
Clamp Style
Clamp Style
- C (18)
- M (41)
- N (111)
- S (32)
- W (3)
- Y (386)
Cutting Width
Cutting Width
- 0.02 in(42)
- 0.031 in(50)
- 0.039 in(93)
- 0.041 in(24)
- 0.047 in(107)
- 0.055 in(53)
- 0.058 in(41)
- 0.06 in(122)
- 0.062 in(128)
- 0.067 in(42)
- 0.069 in(88)
- 0.073 in(47)
- 0.077 in(43)
- 0.078 in(49)
- 0.079 in(237)
- 0.084 in(111)
- 0.088 in(90)
- 0.089 in(65)
- 0.094 in(117)
- 0.095 in(217)
- 0.098 in(169)
- 0.108 in(90)
- 0.119 in(283)
- 0.123 in(140)
- 0.125 in(304)
- 0.126 in(47)
- 0.128 in(87)
- 0.13 in(70)
- 0.138 in(111)
- 0.147 in(25)
- 0.152 in(41)
- 0.156 in(88)
- 0.157 in(189)
- 0.161 in(2)
- 0.162 in(98)
- 0.167 in(47)
- 0.168 in(1)
- 0.177 in(70)
- 0.187 in(93)
- 0.188 in(152)
- 0.189 in(83)
- 0.192 in(77)
- 0.195 in(24)
- 0.196 in(47)
- 0.197 in(99)
- 0.202 in(79)
- 0.217 in(19)
- 0.237 in(95)
- 0.241 in(80)
- 0.249 in(32)
- 0.25 in(104)
- 0.255 in(35)
- 0.281 in(32)
- 0.312 in(40)
- 0.313 in(14)
- 0.315 in(44)
- 0.317 in(24)
- 0.32 in(50)
- 0.321 in(2)
- 0.375 in(9)
- 0.38 in(10)
- 0.399 in(10)
- 0.4 in(3)
- 0.48 in(6)
- 0.559 in(1)
- 0.638 in(4)
to
Cutting Width
Cutting Width
- 0.5 mm(42)
- 0.775 mm(46)
- 0.8 mm(43)
- 1.0 mm(93)
- 1.05 mm(24)
- 1.201 mm(107)
- 1.401 mm(53)
- 1.475 mm(41)
- 1.5 mm(122)
- 1.576 mm(128)
- 1.701 mm(42)
- 1.75 mm(88)
- 1.826 mm(47)
- 1.951 mm(43)
- 1.975 mm(49)
- 2.0 mm(237)
- 2.125 mm(111)
- 2.2 mm(88)
- 2.225 mm(25)
- 2.25 mm(65)
- 2.375 mm(117)
- 2.401 mm(217)
- 2.5 mm(169)
- 2.75 mm(90)
- 3.0 mm(283)
- 3.125 mm(140)
- 3.176 mm(304)
- 3.2 mm(47)
- 3.25 mm(87)
- 3.301 mm(70)
- 3.5 mm(111)
- 3.725 mm(25)
- 3.85 mm(41)
- 3.95 mm(87)
- 3.975 mm(24)
- 4.0 mm(189)
- 4.101 mm(2)
- 4.125 mm(98)
- 4.25 mm(47)
- 4.275 mm(1)
- 4.5 mm(70)
- 4.75 mm(93)
- 4.775 mm(152)
- 4.801 mm(83)
- 4.875 mm(77)
- 4.95 mm(24)
- 4.976 mm(47)
- 5.0 mm(99)
- 5.125 mm(79)
- 5.5 mm(19)
- 6.0 mm(95)
- 6.125 mm(80)
- 6.325 mm(32)
- 6.351 mm(104)
- 6.476 mm(35)
- 7.125 mm(32)
- 7.926 mm(40)
- 7.95 mm(14)
- 8.0 mm(44)
- 8.05 mm(24)
- 8.125 mm(50)
- 8.15 mm(2)
- 9.525 mm(9)
- 9.65 mm(10)
- 10.125 mm(10)
- 10.15 mm(3)
- 12.201 mm(6)
- 14.201 mm(1)
- 16.2 mm(4)
to
Insert Shape
Insert Shape
- PRISMATIC (911)
- T-TRIANGLE 60 (3)
- TN-TOP NOTCH (476)
Cartridge Size
Cartridge Size
- 50 (24)
- 65 (10)
Insert Size
Insert Size
- 1 (24)
- 10 (9)
- 12 (3)
- 16 (2)
- 2 (117)
- 2B (18)
- 3 (136)
- 4 (78)
- 5 (45)
- 6 (45)
- 8 (29)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.067 in(1)
- 0.138 in(23)
- 0.197 in(4)
- 0.21 in(28)
- 0.225 in(1)
- 0.276 in(16)
- 0.294 in(13)
- 0.315 in(12)
- 0.334 in(2)
- 0.394 in(39)
- 0.42 in(3)
- 0.433 in(11)
- 0.44 in(8)
- 0.473 in(18)
- 0.492 in(1)
- 0.5 in(3)
- 0.512 in(21)
- 0.531 in(2)
- 0.551 in(14)
- 0.56 in(9)
- 0.564 in(2)
- 0.591 in(1)
- 0.61 in(2)
- 0.625 in(14)
- 0.63 in(88)
- 0.65 in(18)
- 0.669 in(1)
- 0.728 in(2)
- 0.748 in(24)
- 0.75 in(22)
- 0.787 in(3)
- 0.866 in(43)
- 0.875 in(8)
- 0.945 in(5)
- 0.984 in(13)
- 1.0 in(19)
- 1.024 in(46)
- 1.181 in(3)
- 1.26 in(28)
- 1.339 in(1)
- 1.575 in(15)
- 1.969 in(3)
- 2.362 in(3)
- 4.724 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 1.701 mm(1)
- 3.5 mm(23)
- 5.0 mm(4)
- 5.325 mm(28)
- 5.726 mm(1)
- 7.0 mm(16)
- 7.476 mm(13)
- 8.0 mm(12)
- 8.475 mm(2)
- 10.0 mm(39)
- 10.675 mm(3)
- 11.0 mm(11)
- 11.175 mm(8)
- 12.0 mm(18)
- 12.5 mm(1)
- 12.701 mm(3)
- 13.0 mm(21)
- 13.5 mm(2)
- 14.0 mm(14)
- 14.226 mm(9)
- 14.3 mm(2)
- 15.0 mm(1)
- 15.5 mm(2)
- 15.875 mm(14)
- 16.0 mm(88)
- 16.5 mm(18)
- 17.0 mm(1)
- 18.5 mm(2)
- 19.0 mm(24)
- 19.05 mm(22)
- 20.0 mm(3)
- 22.0 mm(43)
- 22.225 mm(8)
- 23.975 mm(5)
- 25.0 mm(13)
- 25.401 mm(19)
- 26.0 mm(46)
- 30.0 mm(3)
- 32.0 mm(28)
- 34.0 mm(1)
- 40.0 mm(15)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
to
Gage Length
Gage Length
- 6 in(4)
- 7 in(2)
- 2.747 in(2)
- 3.247 in(2)
- 3.754 in(3)
- 3.867 in(2)
- 4.247 in(1)
- 4.252 in(1)
- 4.3 in(2)
- 4.961 in(3)
- 5.05 in(4)
- 5.439 in(2)
- 5.463 in(2)
- 5.482 in(4)
- 5.508 in(6)
- 5.529 in(12)
- 5.533 in(2)
- 5.906 in(2)
- 5.963 in(3)
- 6.226 in(2)
- 6.25 in(2)
- 6.271 in(2)
- 6.534 in(2)
- 6.694 in(2)
- 6.75 in(3)
Gage Length
Gage Length
- 126 mm(3)
- 150 mm(2)
- 170 mm(2)
- 108 mm(1)
- 69.775 mm(2)
- 82.476 mm(2)
- 95.351 mm(3)
- 98.226 mm(2)
- 107.875 mm(1)
- 109.226 mm(2)
- 128.275 mm(4)
- 138.15 mm(2)
- 138.75 mm(2)
- 139.25 mm(4)
- 139.9 mm(6)
- 140.4 mm(12)
- 140.55 mm(2)
- 151.451 mm(3)
- 152.4 mm(4)
- 158.15 mm(2)
- 158.75 mm(2)
- 159.25 mm(2)
- 165.951 mm(2)
- 171.451 mm(3)
- 177.8 mm(2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.65 mm(3)
- 0.75 mm(30)
- 1.026 mm(55)
- 1.1 mm(42)
- 1.326 mm(3)
- 1.901 mm(2)
- 1.975 mm(4)
- 2.551 mm(3)
- 2.75 mm(2)
- 2.926 mm(32)
- 3.801 mm(10)
- 3.85 mm(3)
to
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.027 in(3)
- 0.03 in(30)
- 0.04 in(55)
- 0.044 in(42)
- 0.053 in(3)
- 0.075 in(2)
- 0.078 in(4)
- 0.1 in(3)
- 0.108 in(2)
- 0.115 in(32)
- 0.15 in(10)
- 0.152 in(3)
to
Insert Geometry
Shape
Shape
- PRISMATIC (385)
- TN-TOP NOTCH (365)
Insert Seat Size
Insert Seat Size
- 1 (8)
- 10 (7)
- 12 (3)
- 14 (1)
- 16 (1)
- 1B (8)
- 2 (164)
- 2B (10)
- 3 (289)
- 4 (123)
- 5 (46)
- 6 (53)
- 8 (37)
Cutting Tool Material
Cutting Tool Material
- B H (2)
- C A (2)
- C N (2)
- D P (3)
- H T (2)
- H W (1378)
Back-End
Connection Type
Connection Type
- BORING BAR (106)
- CUTOFF BLADE (15)
- SQUARE SHANK (410)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(5)
- 12.701 mm(5)
- 15.875 mm(7)
- 16.0 mm(6)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(14)
- 25.401 mm(17)
- 31.701 mm(2)
- 31.75 mm(9)
- 32.0 mm(10)
- 38.1 mm(6)
- 40.0 mm(7)
- 44.45 mm(2)
- 50.0 mm(1)
- 50.801 mm(4)
to
Back-End Diameter
Back-End Diameter
- 0.375 in(1)
- 0.394 in(1)
- 0.473 in(5)
- 0.5 in(5)
- 0.625 in(7)
- 0.63 in(6)
- 0.75 in(6)
- 0.787 in(6)
- 0.984 in(14)
- 1.0 in(17)
- 1.248 in(2)
- 1.25 in(9)
- 1.26 in(10)
- 1.5 in(6)
- 1.575 in(7)
- 1.75 in(2)
- 1.969 in(1)
- 2.0 in(4)
to
Shank Height
Shank Height
- 0.375 in(8)
- 0.394 in(6)
- 0.473 in(15)
- 0.5 in(16)
- 0.625 in(22)
- 0.63 in(24)
- 0.748 in(3)
- 0.75 in(50)
- 0.787 in(49)
- 0.978 in(10)
- 0.984 in(77)
- 0.985 in(2)
- 0.99 in(4)
- 1.0 in(63)
- 1.024 in(6)
- 1.25 in(25)
- 1.26 in(32)
- 1.5 in(9)
- 1.575 in(9)
- 2.067 in(1)
to
Shank Height
Shank Height
- 9.525 mm(8)
- 10.0 mm(6)
- 12.0 mm(15)
- 12.701 mm(16)
- 15.875 mm(22)
- 16.0 mm(24)
- 19.0 mm(3)
- 19.05 mm(50)
- 20.0 mm(49)
- 24.85 mm(10)
- 25.0 mm(77)
- 25.026 mm(2)
- 25.151 mm(4)
- 25.401 mm(63)
- 25.975 mm(1)
- 26.0 mm(5)
- 31.75 mm(25)
- 31.975 mm(1)
- 32.0 mm(31)
- 38.1 mm(9)
- 40.0 mm(9)
- 52.5 mm(1)
to
Shank Width
Shank Width
- 0.065 in(3)
- 0.072 in(4)
- 0.095 in(2)
- 0.126 in(1)
- 0.134 in(2)
- 0.174 in(1)
- 0.213 in(1)
- 0.276 in(2)
- 0.375 in(8)
- 0.394 in(6)
- 0.461 in(2)
- 0.473 in(13)
- 0.5 in(16)
- 0.512 in(2)
- 0.624 in(4)
- 0.625 in(22)
- 0.63 in(20)
- 0.709 in(1)
- 0.75 in(50)
- 0.781 in(3)
- 0.787 in(45)
- 0.978 in(10)
- 0.984 in(76)
- 0.99 in(4)
- 1.0 in(67)
- 1.207 in(1)
- 1.25 in(26)
- 1.26 in(27)
- 1.5 in(6)
- 1.575 in(6)
to
Shank Width
Shank Width
- 1.651 mm(3)
- 1.8 mm(4)
- 2.401 mm(2)
- 3.2 mm(1)
- 3.401 mm(2)
- 4.4 mm(1)
- 5.4 mm(1)
- 7.0 mm(2)
- 9.525 mm(8)
- 10.0 mm(6)
- 11.701 mm(2)
- 12.0 mm(13)
- 12.701 mm(16)
- 13.0 mm(2)
- 15.851 mm(4)
- 15.875 mm(22)
- 16.0 mm(20)
- 18.0 mm(1)
- 19.05 mm(50)
- 19.85 mm(3)
- 20.0 mm(45)
- 24.85 mm(10)
- 25.0 mm(76)
- 25.151 mm(4)
- 25.401 mm(67)
- 30.651 mm(1)
- 31.75 mm(26)
- 32.0 mm(27)
- 38.1 mm(6)
- 40.0 mm(6)
to
No filters matching ""
