Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

    PSC 50 Kesme üniteleri

    Filtreleri Seçin
    Filtreler
    Filtreler
      Filtreleri şurada görüntüle
      Metrik
      İnç
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (65)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(65)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(65)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(65)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(65)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(65)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(65)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(65)
      • M Stainless Steel (65)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(65)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(65)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(65)
      • K Cast Iron (65)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(65)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(65)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(65)
      • N Non-Ferrous Materials (64)
        • N1
          Wrought Aluminum (64)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(64)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(49)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (64)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (64)
        • N6
          Carbon, Graphite Composites, CFRP (64)
        • N7
          MMC's (56)
      • S High-Temp Alloys (65)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(65)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(65)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(65)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(65)
      • H Hardened Materials (57)
        • H1
          Hardened Materials 44-48 HRC(57)
        • H2
          Hardened Materials 48-55 HRC(57)
        • H3
          Hardened Materials 56-60 HRC(57)
        • H4
          Hardened Materials >60 HRC(44)
      • C CFRP Materials (53)
        • C1
          CFRP, CFRP / CFRP (53)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (45)
      Applications
      Applications
      • FacingFacing (53)
      • GroovingGrooving (8)
      • ID FacingID Facing (47)
      • ID GroovingID Grooving (5)
      • Multiple Direction CuttingMultiple Direction Cutting (53)
      • OD Thread TurningOD Thread Turning (4)
      • Plunge TurningPlunge Turning (14)
      • ProfilingProfiling (4)
      • TRN BoringTRN Boring (47)
      • TurningTurning (53)
      Type of Thread
      Type of Thread
      • 55 (4)
      • 60 (12)
      • ACME (12)
      • API (10)
      • API BUTTRESS (2)
      • API RD (8)
      • BSPT (2)
      • BSW (10)
      • BUTTRESS (8)
      • M (10)
      • NPT (8)
      • NPTF (2)
      • RD DIN 405 (4)
      • STUB ACME (10)
      • TR DIN 103 (4)
      • UN (10)
      • UNJ (8)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (61)
      • Lightly Interrupted Cut (61)
      • Smooth Cut (61)
      • Varying Depth of Cut (61)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 45.0 (4)
      • 62.5 (1)
      • 72.5 (1)
      • 75.0 (7)
      • 90.0 (12)
      • 93.0 (19)
      • 95.0 (16)
      • 107.5 (5)
      Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • PSC (21)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (45)
      • 2.0 (53)
      • 3.0 (6)
      • 4.0 (37)
      • 6.0 (4)
      • 8.0 (22)
      Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.969 in(1)
      • 2.047 in(10)
      • 2.362 in(48)
      • 2.441 in(3)
      • 2.559 in(3)
      Over All Length [L] Min-Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 50.0 mm(1)
      • 52.0 mm(10)
      • 60.0 mm(48)
      • 62.0 mm(3)
      • 65.0 mm(3)
      Over All Length [L] Min-Over All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(2)
      • 0.001 in(4)
      • 0.002 in(16)
      • 0.003 in(10)
      • 0.004 in(43)
      • 0.005 in(7)
      • 0.006 in(9)
      • 0.007 in(9)
      • 0.008 in(41)
      • 0.01 in(9)
      • 0.011 in(8)
      • 0.012 in(7)
      • 0.014 in(18)
      • 0.015 in(1)
      • 0.016 in(50)
      • 0.017 in(2)
      • 0.019 in(8)
      • 0.02 in(6)
      • 0.021 in(2)
      • 0.023 in(8)
      • 0.024 in(2)
      • 0.03 in(1)
      • 0.031 in(57)
      • 0.035 in(8)
      • 0.039 in(7)
      • 0.047 in(57)
      • 0.049 in(6)
      • 0.06 in(7)
      • 0.062 in(14)
      • 0.063 in(46)
      • 0.069 in(6)
      • 0.078 in(6)
      • 0.079 in(8)
      • 0.089 in(8)
      • 0.094 in(4)
      • 0.095 in(19)
      • 0.098 in(2)
      • 0.125 in(2)
      • 0.126 in(2)
      • 0.25 in(2)
      Corner Radius Min-Corner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(2)
      • 0.025 mm(4)
      • 0.05 mm(16)
      • 0.076 mm(10)
      • 0.1 mm(43)
      • 0.125 mm(7)
      • 0.151 mm(9)
      • 0.176 mm(9)
      • 0.2 mm(41)
      • 0.225 mm(7)
      • 0.25 mm(9)
      • 0.275 mm(8)
      • 0.301 mm(7)
      • 0.325 mm(9)
      • 0.351 mm(17)
      • 0.375 mm(1)
      • 0.4 mm(50)
      • 0.426 mm(2)
      • 0.45 mm(8)
      • 0.476 mm(3)
      • 0.5 mm(6)
      • 0.525 mm(2)
      • 0.576 mm(8)
      • 0.601 mm(2)
      • 0.75 mm(1)
      • 0.775 mm(6)
      • 0.8 mm(51)
      • 0.9 mm(8)
      • 1.0 mm(7)
      • 1.201 mm(57)
      • 1.25 mm(6)
      • 1.5 mm(6)
      • 1.526 mm(1)
      • 1.576 mm(14)
      • 1.6 mm(46)
      • 1.75 mm(6)
      • 1.975 mm(6)
      • 2.0 mm(8)
      • 2.25 mm(8)
      • 2.375 mm(4)
      • 2.401 mm(19)
      • 2.5 mm(2)
      • 3.176 mm(2)
      • 3.2 mm(2)
      • 6.351 mm(2)
      Corner Radius Min-Corner Radius Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • 13E (31)
      • 241 (8)
      • CL4 (24)
      • CM2 (26)
      • CM3 (24)
      • CM4 (12)
      • CPX (28)
      • CW2 (17)
      • CW2015 (31)
      • CW5025 (35)
      • GH1 (2)
      • GX (15)
      • HCK10 (4)
      • HK1500 (36)
      • HK35 (2)
      • HT2 (27)
      • HTX (16)
      • HWK15 (4)
      • K00326 (4)
      • K00331 (1)
      • K060 (12)
      • K090 (35)
      • K1 (13)
      • K1010P (2)
      • K10M (41)
      • K10P (35)
      • K10U (34)
      • K15U (34)
      • K20K (41)
      • K21 (15)
      • K25M (36)
      • K25P (37)
      • K2885 (6)
      • K313 (59)
      • K35P (17)
      • K420 (34)
      • K45 (15)
      • K4H (6)
      • K68 (56)
      • K8735 (4)
      • KB1340 (12)
      • KB1345 (22)
      • KB1610 (25)
      • KB1625 (21)
      • KB1630 (23)
      • KB5610 (23)
      • KB5625 (29)
      • KB5630 (21)
      • KB9610 (34)
      • KB9640 (16)
      • KBH10 (34)
      • KBH10B (22)
      • KBH20 (37)
      • KBH20B (22)
      • KBK35 (8)
      • KC210 (26)
      • KC250 (29)
      • KC5010 (64)
      • KC5020P (6)
      • KC5025 (63)
      • KC5410 (53)
      • KC5510 (39)
      • KC5525 (25)
      • KC710 (20)
      • KC720 (42)
      • KC722 (17)
      • KC730 (51)
      • KC7310 (43)
      • KC732 (37)
      • KC8050 (53)
      • KC810 (59)
      • KC850 (59)
      • KC9010 (43)
      • KC9025 (53)
      • KC910 (55)
      • KC9105 (51)
      • KC9110 (61)
      • KC9120 (53)
      • KC9125 (53)
      • KC9125RR (2)
      • KC9140 (41)
      • KC9145 (37)
      • KC9210 (9)
      • KC9215 (39)
      • KC9225 (51)
      • KC9240 (47)
      • KC9240NEW (47)
      • KC9245 (39)
      • KC9315 (53)
      • KC9320 (57)
      • KC9325 (45)
      • KC935 (61)
      • KC950 (57)
      • KC990 (45)
      • KCD25 (14)
      • KCK05 (53)
      • KCK05B (43)
      • KCK15 (49)
      • KCK15B (53)
      • KCK20 (57)
      • KCK20B (57)
      • KCM15 (47)
      • KCM15B (51)
      • KCM25 (51)
      • KCM25B (47)
      • KCM25S (4)
      • KCM35 (45)
      • KCM35B (36)
      • KCP05 (44)
      • KCP05B (36)
      • KCP10 (53)
      • KCP10B (61)
      • KCP15 (4)
      • KCP20S (4)
      • KCP25 (53)
      • KCP25B (61)
      • KCP25C (53)
      • KCP30 (49)
      • KCP30B (36)
      • KCP40 (32)
      • KCP40B (43)
      • KCPK05 (37)
      • KCS10 (16)
      • KCS10B (49)
      • KCS25S (4)
      • KCU10 (61)
      • KCU10B (61)
      • KCU25 (59)
      • KCU25B (59)
      • KD050 (28)
      • KD081 (31)
      • KD100 (27)
      • KD120 (27)
      • KD1400 (23)
      • KD1405 (17)
      • KD1425 (33)
      • KM1 (10)
      • KMF (8)
      • KN10S (4)
      • KS15 (12)
      • KT1120 (7)
      • KT125 (30)
      • KT150 (19)
      • KT175 (38)
      • KT315 (50)
      • KT325 (27)
      • KT5020 (3)
      • KTP10 (38)
      • KTP25S (32)
      • KU10 (8)
      • KU10T (46)
      • KU25T (9)
      • KU30T (57)
      • KY1310 (18)
      • KY1320 (35)
      • KY1540 (17)
      • KY1615 (33)
      • KY2000 (19)
      • KY2100 (12)
      • KY3000 (41)
      • KY3400 (23)
      • KY3500 (35)
      • KY4000 (15)
      • KY4300 (17)
      • KY4400 (35)
      • KYHK15B (35)
      • KYK10 (14)
      • KYK25 (23)
      • KYK35 (35)
      • KYS25 (17)
      • KYS30 (19)
      • NL200 (17)
      • NL250 (37)
      • NL300 (28)
      • NL400 (17)
      • NL920 (27)
      • P25 (10)
      • PB100 (10)
      • PB170 (8)
      • PB250 (10)
      • PB300 (8)
      • PD100 (4)
      • PD50 (2)
      • PN120 (1)
      • PS5 (19)
      • SP0819 (28)
      • SP0A00 (2)
      • SP3019 (19)
      • SP4019 (23)
      • SP4036 (3)
      • SP4093 (3)
      • SP61EJ (2)
      • SPADAP (5)
      • SPN3W1 (2)
      • SPSREJ (2)
      • THM (29)
      • THM-X (23)
      • THMF-X (10)
      • TN10P (51)
      • TN10U (34)
      • TN15M (43)
      • TN15U (34)
      • TN2000 (36)
      • TN20K (47)
      • TN20P (49)
      • TN30M (45)
      • TN30P (32)
      • TN4000 (34)
      • TN5015 (38)
      • TN5020 (38)
      • TN5105 (29)
      • TN5120 (40)
      • TN6010 (34)
      • TN6025 (37)
      • TN7005 (31)
      • TN7010 (42)
      • TN7015 (42)
      • TN7025 (42)
      • TN7035 (38)
      • TN7105 (31)
      • TN7110 (48)
      • TN7115 (40)
      • TN7125 (40)
      • TN7135 (38)
      • TN8025 (38)
      • TTI15 (27)
      • TTM (2)
      • TTM09 (2)
      • TTR (14)
      • TTS (27)
      • TTX (25)
      • W00342 (2)
      • WBH10C (34)
      • WBH10P (21)
      • WBH10U (25)
      • WBH20P (30)
      • WBH25P (23)
      • WBH25U (27)
      • WBH30P (21)
      • WBK40U (12)
      • WBK45U (23)
      • WDN00U (12)
      • WDN25U (23)
      • WK05CT (45)
      • WK15CT (33)
      • WK20CT (49)
      • WM15CT (47)
      • WM25CT (47)
      • WM35CT (39)
      • WP05CT (10)
      • WP15CT (49)
      • WP20TT (4)
      • WP25CT (49)
      • WP35CT (49)
      • WS10PT (41)
      • WS25PT (43)
      • WU05PT (4)
      • WU10HT (50)
      • WU10PT (38)
      • WU25PT (39)
      • X00511 (8)
      • X00580 (8)
      • X00581 (8)
      • X00582 (8)
      • X00583 (8)
      • X00584 (8)
      • X00585 (8)
      • X00586 (8)
      • X00591 (8)
      • X00592 (8)
      • X00593 (8)
      • X00594 (8)
      • X00596 (8)
      • X00597 (8)
      • X00599 (8)
      Hand Of Tool
      Hand Of Tool
      • L (8)
      • N (2)
      • R (11)
      Wiper Insert
      Wiper Insert
      • N (65)
      • Y (27)
      F Dimension
      F Dimension
      • 0.0 mm(2)
      • 27.0 mm(4)
      • 35.0 mm(15)
      F Dimension Min-F Dimension Max
      F Dimension
      F Dimension
      • 0.0 in(2)
      • 1.063 in(4)
      • 1.379 in(15)
      F Dimension Min-F Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(3)
      • 41.301 mm(2)
      • 47.6 mm(2)
      • 57.2 mm(1)
      • 62.0 mm(3)
      • 64.0 mm(2)
      • 65.0 mm(6)
      • 65.5 mm(1)
      • 66.0 mm(1)
      • 80.0 mm(2)
      • 88.9 mm(2)
      • 110.0 mm(27)
      • 125.0 mm(7)
      • 139.701 mm(2)
      • 165.0 mm(1)
      • 174.601 mm(2)
      • 209.601 mm(1)
      • 222.3 mm(1)
      • 223.0 mm(2)
      Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(3)
      • 1.627 in(2)
      • 1.874 in(2)
      • 2.253 in(1)
      • 2.441 in(3)
      • 2.52 in(2)
      • 2.559 in(6)
      • 2.579 in(1)
      • 2.598 in(1)
      • 3.15 in(2)
      • 3.5 in(2)
      • 4.331 in(27)
      • 4.921 in(7)
      • 5.5 in(2)
      • 6.496 in(1)
      • 6.875 in(2)
      • 8.252 in(1)
      • 8.752 in(1)
      • 8.78 in(2)
      Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(8)
      Maximum Axial Groove Diameter Min-Maximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(8)
      Maximum Axial Groove Diameter Min-Maximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • B (2)
      • E (7)
      • S (12)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (9)
      • NEGATIVE-ZERO (1)
      • NEUTRAL (ZERO) (8)
      Maximum Bore Depth
      Maximum Bore Depth
      • 1.969 in(1)
      • 2.047 in(8)
      • 2.362 in(34)
      • 2.441 in(2)
      • 2.559 in(2)
      Maximum Bore Depth Min-Maximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 50.0 mm(1)
      • 52.0 mm(8)
      • 60.0 mm(34)
      • 62.0 mm(2)
      • 65.0 mm(2)
      Maximum Bore Depth Min-Maximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (8)
      frontEnd
      Adapter Front-End
      Adapter Front-End
      • CARTRIDGE MOUNT (6)
      Clamp Style
      Clamp Style
      • D (34)
      • N (12)
      • P (7)
      • S (12)
      Cutting Width
      Cutting Width
      • 0.039 in(6)
      • 0.047 in(6)
      • 0.06 in(6)
      • 0.062 in(6)
      • 0.069 in(6)
      • 0.073 in(6)
      • 0.078 in(6)
      • 0.079 in(6)
      • 0.088 in(6)
      • 0.089 in(3)
      • 0.094 in(3)
      • 0.095 in(6)
      • 0.097 in(6)
      • 0.098 in(6)
      • 0.105 in(6)
      • 0.108 in(6)
      • 0.11 in(6)
      • 0.119 in(8)
      • 0.122 in(6)
      • 0.125 in(8)
      • 0.126 in(8)
      • 0.128 in(6)
      • 0.131 in(3)
      • 0.138 in(8)
      • 0.143 in(6)
      • 0.156 in(6)
      • 0.157 in(8)
      • 0.167 in(8)
      • 0.169 in(6)
      • 0.177 in(8)
      • 0.178 in(6)
      • 0.185 in(8)
      • 0.188 in(8)
      • 0.189 in(8)
      • 0.192 in(3)
      • 0.193 in(3)
      • 0.195 in(6)
      • 0.196 in(6)
      • 0.197 in(2)
      • 0.202 in(2)
      • 0.213 in(2)
      • 0.217 in(2)
      • 0.219 in(2)
      • 0.237 in(2)
      • 0.25 in(2)
      • 0.256 in(2)
      Cutting Width Min-Cutting Width Max
      Cutting Width
      Cutting Width
      • 1.0 mm(6)
      • 1.201 mm(6)
      • 1.5 mm(6)
      • 1.576 mm(6)
      • 1.75 mm(6)
      • 1.826 mm(6)
      • 1.975 mm(6)
      • 2.0 mm(6)
      • 2.2 mm(6)
      • 2.225 mm(6)
      • 2.25 mm(3)
      • 2.375 mm(3)
      • 2.401 mm(6)
      • 2.475 mm(6)
      • 2.5 mm(6)
      • 2.676 mm(6)
      • 2.75 mm(6)
      • 2.801 mm(6)
      • 3.0 mm(8)
      • 3.1 mm(6)
      • 3.176 mm(8)
      • 3.2 mm(8)
      • 3.25 mm(6)
      • 3.325 mm(3)
      • 3.5 mm(8)
      • 3.6 mm(6)
      • 3.95 mm(6)
      • 3.975 mm(3)
      • 4.0 mm(8)
      • 4.25 mm(8)
      • 4.3 mm(6)
      • 4.5 mm(8)
      • 4.525 mm(6)
      • 4.7 mm(8)
      • 4.775 mm(8)
      • 4.801 mm(8)
      • 4.875 mm(3)
      • 4.9 mm(3)
      • 4.95 mm(6)
      • 4.976 mm(6)
      • 5.0 mm(2)
      • 5.125 mm(2)
      • 5.4 mm(2)
      • 5.5 mm(2)
      • 5.575 mm(2)
      • 6.0 mm(2)
      • 6.351 mm(2)
      • 6.5 mm(2)
      Cutting Width Min-Cutting Width Max
      Front End Type
      Front End Type
      • MCS - Modular Cartridge System (6)
      Insert Shape
      Insert Shape
      • C-DIAMOND/RHOMBIC 80 (17)
      • D-DIAMOND/RHOMBIC 55 (15)
      • LT-TRIANGLE LAY DOWN THREAD 60 (4)
      • R-ROUND (2)
      • S-SQUARE 90 (4)
      • TN-TOP NOTCH (8)
      • V-DIAMOND/RHOMBIC 35 (11)
      • W-TRIGON 80 (4)
      Front End Style
      Front End Style
      • MCS01 Modular Deep Grooving (6)
      Insert Size
      Insert Size
      • 3 (6)
      • 4 (2)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.21 in(4)
      • 0.294 in(2)
      Maximum Cutting Depth Min-Maximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 5.325 mm(4)
      • 7.476 mm(2)
      Maximum Cutting Depth Min-Maximum Cutting Depth Max
      Gage Length
      Gage Length
      • 1.929 in(2)
      • 2.185 in(2)
      • 2.5 in(2)
      Gage Length
      Gage Length
      • 49 mm(2)
      • 55.5 mm(2)
      • 63.5 mm(2)
      insertGeometry
      Cutting Tool Material
      Cutting Tool Material
      • B H (50)
      • B L (44)
      • C A (37)
      • C N (47)
      • D P (42)
      • H T (50)
      • H W (65)
      backEnd
      Connection Type
      Connection Type
      • TAPER SHANK (21)
      System Size
      System Size
      • PSC50 (16)
      No filters matching ""
      D-Sıkma
      (34)

      D-Sıkma

      P-Sıkma
      (7)

      P-Sıkma

      S-Sıkma
      (8)

      S-Sıkma

      Top Thread™ Profil İşleme
      (4)

      Top Thread™ Profil İşleme

      Top Thread™ ve Top Groove™
      (8)

      Top Thread™ ve Top Groove™

      WGC Kanal Açma ve Dilimleme
      (6)

      WGC Kanal Açma ve Dilimleme

      Laydown Vida Açma
      (4)

      Laydown Vida Açma

      öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
      Select the destination where you want to move -.
      Yeni Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Lütfen geçerli bir ad girin
      product-image
      Please adjust the following properties from

      ISO Katalog Numarası

      ANSI Katalog Numarası

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Pano bilgilerinizi görmek için oturum açmalısınız
      Session expired due to inactivity, please login again
      Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
      ürün(ler) sepete başarıyla eklendi
      Sepeti Görüntüle

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO Katalog NumarasıKalite  

      You are about to leave the Solution building process.

      Are you sure you want to leave?