Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrikİnç
Workpiece Material
Workpiece Material
- P Steel (45)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(45)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(45)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(45)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(45)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(45)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(45)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(45)
- M Stainless Steel (45)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(45)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(45)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(45)
- K Cast Iron (45)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(45)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(45)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(45)
- N Non-Ferrous Materials (45)
- N1Wrought Aluminum (45)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(45)
- N3High-Silicon Aluminum Alloys Si >12.2%(42)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (45)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (45)
- N6Carbon, Graphite Composites, CFRP (45)
- N7MMC's (42)
- S High-Temp Alloys (45)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(45)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(45)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(45)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(45)
- H Hardened Materials (42)
- H1Hardened Materials 44-48 HRC(42)
- H2Hardened Materials 48-55 HRC(42)
- H3Hardened Materials 56-60 HRC(42)
- H4Hardened Materials >60 HRC(42)
- C CFRP Materials (45)
- C1CFRP, CFRP / CFRP (45)
- C2CFRP / Aluminium CFRP / Non-Ferrous (42)
Applications
Applications
Facing (16)
Multiple Direction Cutting (28)
Profiling (28)
Turning (40)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (45)
- Lightly Interrupted Cut (45)
- Smooth Cut (45)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 62.5 (2)
- 90.0 (15)
- 93.0 (20)
- 95.0 (8)
-
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (42)
- 2.0 (32)
- 3.0 (13)
- 4.0 (9)
-
Over All Length [L]
Over All Length [L]
- 0.787 in(42)
- 1.181 in(3)
-
Over All Length [L]
Over All Length [L]
- 20.0 mm(42)
- 30.0 mm(3)
-
Corner Radius
Corner Radius
- 0.0 in(29)
- 0.001 in(29)
- 0.002 in(32)
- 0.004 in(36)
- 0.008 in(42)
- 0.016 in(42)
- 0.031 in(45)
- 0.047 in(30)
- 0.063 in(9)
-
Corner Radius
Corner Radius
- 0.0 mm(29)
- 0.025 mm(29)
- 0.05 mm(32)
- 0.1 mm(36)
- 0.2 mm(42)
- 0.4 mm(42)
- 0.8 mm(45)
- 1.201 mm(30)
- 1.6 mm(9)
-
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HWK10 (4)
- K313 (42)
- K68 (11)
- KB1345 (21)
- KB1610 (13)
- KB1630 (9)
- KB5610 (27)
- KB5630 (24)
- KBH10 (36)
- KBH20 (42)
- KC5010 (45)
- KC5020P (8)
- KC5025 (45)
- KC5410 (42)
- KC730 (42)
- KC850 (42)
- KCK05 (42)
- KCK05B (21)
- KCK15 (34)
- KCK15B (34)
- KCK20 (34)
- KCK20B (42)
- KCM15 (33)
- KCM15B (28)
- KCM25 (38)
- KCM25B (42)
- KCM25S (21)
- KCM35 (34)
- KCM35B (9)
- KCP05 (32)
- KCP05B (12)
- KCP10 (42)
- KCP10B (42)
- KCP15 (3)
- KCP20S (21)
- KCP25 (45)
- KCP25B (42)
- KCP25C (45)
- KCP30 (34)
- KCP40B (3)
- KCS10 (45)
- KCS10B (42)
- KCS25S (21)
- KCU10 (42)
- KCU10B (45)
- KCU25 (42)
- KCU25B (45)
- KD1400 (42)
- KD1405 (3)
- KD1425 (36)
- KN10S (29)
- KT315 (42)
- KT325 (42)
- KTP10 (42)
- KTP25S (42)
- THM (34)
- THM-X (21)
- TN10P (42)
- TN10U (42)
- TN15M (28)
- TN15U (12)
- TN2000 (24)
- TN20K (34)
- TN20P (42)
- TN30M (30)
- TN4000 (12)
- TN6010 (21)
- TN6025 (21)
- TTR (10)
- WBH10P (24)
- WBH10U (13)
- WBH20P (31)
- WBH30P (24)
- WDN00U (9)
- WDN25U (42)
- WK05CT (13)
- WK15CT (34)
- WK20CT (34)
- WM15CT (30)
- WM25CT (42)
- WP15CT (42)
- WP20TT (16)
- WP25CT (42)
- WP35CT (12)
- WS10PT (27)
- WS25PT (27)
- WU05PT (31)
- WU10HT (34)
- WU10PT (42)
- WU25PT (34)
Hand Of Tool
Hand Of Tool
- L (20)
- N (2)
- R (23)
Wiper Insert
Wiper Insert
- N (45)
- Y (11)
F Dimension
F Dimension
- 0.0 mm(2)
- 8.0 mm(13)
- 10.0 mm(30)
-
F Dimension
F Dimension
- 0.0 in(2)
- 0.315 in(13)
- 0.394 in(30)
-
Cutting Direction
Cutting Direction
- B (8)
- S (37)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (40)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (12)
- T-TRIANGLE 60 (10)
- V-DIAMOND/RHOMBIC 35 (11)
- W-TRIGON 80 (3)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (34)
- B L (42)
- D P (42)
- H T (42)
- H W (45)
backEnd
System Size
System Size
- KM12 (14)
- KM16 (31)
Back-End Diameter
Back-End Diameter
- 12.0 mm(14)
- 16.0 mm(31)
-
Back-End Diameter
Back-End Diameter
- 0.473 in(14)
- 0.63 in(31)
-
No filters matching ""
