Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

M270 High Feed - Tool Bodies

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (15)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
    • M Stainless Steel (15)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(15)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(15)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(15)
    • K Cast Iron (15)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
    • S High-Temp Alloys (3)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
    • H Hardened Materials (15)
      • H1
        Hardened Materials 44-48 HRC(15)
      • H2
        Hardened Materials 48-55 HRC(7)
      • H3
        Hardened Materials 56-60 HRC(7)
    Applications
    Applications
    • Face MillingFace Milling (25)
    • PocketPocket (25)
    • Pocket HelicalPocket Helical (25)
    • Pocket MillingPocket Milling (25)
    • RampingRamping (25)
    • Shoulder MillingShoulder Milling (25)
    • Shoulder Square EndShoulder Square End (25)
    • Slot MillingSlot Milling (25)
    • Slot Square EndSlot Square End (25)
    Cutting Diameter
    Cutting Diameter
    • 0.375 in(2)
    • 0.394 in(3)
    • 0.473 in(4)
    • 0.5 in(3)
    • 0.625 in(2)
    • 0.626 in(1)
    • 0.63 in(4)
    • 0.75 in(2)
    • 0.787 in(4)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(4)
    • 12.701 mm(3)
    • 15.875 mm(2)
    • 15.9 mm(1)
    • 16.0 mm(4)
    • 19.05 mm(2)
    • 20.0 mm(4)
    Cutting Diameter Min-Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 13.0 mm(4)
    • 17.0 mm(4)
    Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.512 in(4)
    • 0.669 in(4)
    Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.55 mm(3)
    • 0.601 mm(6)
    • 0.625 mm(3)
    • 0.9 mm(4)
    • 0.925 mm(3)
    • 1.1 mm(3)
    • 1.125 mm(3)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.022 in(3)
    • 0.024 in(6)
    • 0.025 in(3)
    • 0.035 in(4)
    • 0.037 in(3)
    • 0.044 in(6)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 0.752 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.181 in(1)
    • 1.25 in(1)
    • 1.575 in(1)
    • 1.772 in(3)
    • 1.8 in(1)
    • 1.969 in(3)
    • 2.0 in(2)
    • 2.244 in(3)
    • 2.299 in(1)
    • 2.301 in(1)
    • 2.757 in(3)
    • 2.801 in(2)
    Reach Min-Reach Max
    Reach
    Reach
    • 19.1 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 30.0 mm(1)
    • 31.75 mm(1)
    • 40.0 mm(1)
    • 45.0 mm(3)
    • 45.725 mm(1)
    • 50.0 mm(3)
    • 50.801 mm(2)
    • 57.0 mm(3)
    • 58.401 mm(1)
    • 58.426 mm(1)
    • 70.0 mm(3)
    • 71.125 mm(2)
    Reach Min-Reach Max
    Connection Style
    Connection Style
    • Screw-On Connection (3)
    • Straight-Cylindrical (22)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (25)
    • 2.0 (20)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.655 in(1)
    • 1.85 in(1)
    • 2.323 in(1)
    • 4.724 in(3)
    • 5.252 in(1)
    • 5.5 in(1)
    • 5.513 in(2)
    • 5.55 in(1)
    • 5.75 in(2)
    • 5.752 in(1)
    • 5.906 in(2)
    • 6.0 in(2)
    • 6.299 in(2)
    • 7.0 in(2)
    • 7.087 in(2)
    • 7.875 in(1)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 42.0 mm(1)
    • 47.0 mm(1)
    • 59.0 mm(1)
    • 120.0 mm(3)
    • 133.4 mm(1)
    • 139.701 mm(1)
    • 140.0 mm(2)
    • 140.975 mm(1)
    • 146.05 mm(2)
    • 146.1 mm(1)
    • 150.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(2)
    • 177.8 mm(2)
    • 180.0 mm(2)
    • 200.0 mm(1)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.012 in(15)
    • 0.02 in(15)
    • 0.024 in(2)
    • 0.025 in(3)
    • 0.03 in(4)
    • 0.031 in(5)
    • 0.039 in(18)
    • 0.047 in(2)
    • 0.049 in(4)
    • 0.063 in(3)
    • 0.079 in(4)
    • 0.08 in(8)
    • 0.12 in(4)
    • 0.158 in(4)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.301 mm(15)
    • 0.5 mm(15)
    • 0.601 mm(2)
    • 0.625 mm(3)
    • 0.75 mm(4)
    • 0.8 mm(5)
    • 1.0 mm(18)
    • 1.201 mm(2)
    • 1.25 mm(4)
    • 1.6 mm(3)
    • 2.0 mm(4)
    • 2.025 mm(8)
    • 3.051 mm(4)
    • 4.025 mm(4)
    Corner Radius Min-Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN2505 (25)
    • TN2510 (15)
    • TN2525 (15)
    • TN6525 (22)
    • TN6540 (25)
    • WU10PM (15)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.346 in(4)
    • 0.417 in(6)
    • 0.509 in(1)
    • 0.559 in(5)
    • 0.701 in(1)
    • 0.706 in(3)
    • 0.707 in(1)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 8.775 mm(4)
    • 10.601 mm(6)
    • 12.925 mm(1)
    • 14.201 mm(5)
    • 17.776 mm(1)
    • 17.925 mm(3)
    • 17.95 mm(1)
    Neck Diameter Min-Neck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (22)
    • SCREW-ON (3)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.701 mm(4)
    • 13.0 mm(2)
    • 15.875 mm(3)
    • 16.0 mm(3)
    • 18.0 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(3)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(3)
    • 0.473 in(3)
    • 0.5 in(4)
    • 0.512 in(2)
    • 0.625 in(3)
    • 0.63 in(3)
    • 0.709 in(1)
    • 0.75 in(2)
    • 0.787 in(3)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    M270 Yüksek ilerleme • Silindirik şaftlar • Metrik
    (4)

    M270 Yüksek ilerleme • Silindirik şaftlar • Metrik

    M270 Yüksek ilerleme • Toroid biçimli • Vida bağlamalı • Metrik
    (3)

    M270 Yüksek ilerleme • Toroid biçimli • Vida bağlamalı • Metrik

    M270 High Feed • Cylindrical Shank
    (6)

    M270 High Feed • Cylindrical Shank

    M270 Yüksek ilerleme • Karbür silindirik şaft • Metrik
    (8)

    M270 Yüksek ilerleme • Karbür silindirik şaft • Metrik

    M270 High Feed • Carbide Cylindrical Shank
    (4)

    M270 High Feed • Carbide Cylindrical Shank

    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Katalog NumarasıKalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?