Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

Laydown Threading - Toolholders

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (39)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(39)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(39)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(39)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(39)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(39)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(39)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(39)
    • M Stainless Steel (39)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(39)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(39)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(39)
    • K Cast Iron (39)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(39)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(39)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(39)
    • N Non-Ferrous Materials (37)
      • N1
        Wrought Aluminum (37)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(37)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(37)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (37)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (37)
      • N6
        Carbon, Graphite Composites, CFRP (37)
      • N7
        MMC's (37)
    • S High-Temp Alloys (39)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(39)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(39)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(39)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(39)
    Select All Star
    • US (2)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (18)
    • OD Thread TurningOD Thread Turning (26)
    • ProfilingProfiling (10)
    • TRN BoringTRN Boring (4)
    • ThreadingThreading (29)
    Type of Thread
    Type of Thread
    • 55 (36)
    • 60 (37)
    • ACME (16)
    • API (6)
    • API BUTTRESS (5)
    • API RD (11)
    • BSPT (15)
    • BSW (36)
    • M (39)
    • NPT (27)
    • NPTF (15)
    • RD DIN 405 (34)
    • STUB ACME (16)
    • TR DIN 103 (34)
    • UN (27)
    • UNJ (15)
    Connection Style
    Connection Style
    • KM (22)
    • Toolholder (19)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (40)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(7)
    • 1.772 in(3)
    • 2.362 in(2)
    • 2.757 in(2)
    • 3.15 in(1)
    • 3.25 in(1)
    • 3.543 in(2)
    • 3.938 in(4)
    • 4.331 in(4)
    • 4.921 in(1)
    • 5.0 in(1)
    • 5.039 in(1)
    • 5.354 in(1)
    • 5.906 in(1)
    • 6.0 in(6)
    • 6.024 in(1)
    • 6.102 in(1)
    • 6.811 in(1)
    • 6.891 in(1)
    • 6.929 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(7)
    • 45.0 mm(3)
    • 60.0 mm(2)
    • 70.0 mm(2)
    • 80.0 mm(1)
    • 82.551 mm(1)
    • 90.0 mm(2)
    • 100.0 mm(4)
    • 110.0 mm(4)
    • 125.0 mm(1)
    • 127.0 mm(1)
    • 128.0 mm(1)
    • 136.0 mm(1)
    • 150.0 mm(1)
    • 152.4 mm(6)
    • 153.0 mm(1)
    • 155.0 mm(1)
    • 173.0 mm(1)
    • 175.0 mm(1)
    • 176.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(7)
    • 0.002 in(28)
    • 0.003 in(23)
    • 0.004 in(15)
    • 0.005 in(1)
    • 0.006 in(10)
    • 0.007 in(1)
    • 0.008 in(23)
    • 0.01 in(13)
    • 0.011 in(14)
    • 0.012 in(7)
    • 0.014 in(1)
    • 0.015 in(1)
    • 0.017 in(9)
    • 0.02 in(1)
    • 0.021 in(6)
    • 0.027 in(1)
    • 0.028 in(6)
    • 0.03 in(11)
    • 0.037 in(7)
    • 0.038 in(1)
    • 0.039 in(5)
    • 0.055 in(2)
    • 0.06 in(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(7)
    • 0.05 mm(28)
    • 0.076 mm(23)
    • 0.1 mm(15)
    • 0.125 mm(1)
    • 0.151 mm(10)
    • 0.176 mm(1)
    • 0.2 mm(23)
    • 0.225 mm(4)
    • 0.25 mm(10)
    • 0.275 mm(14)
    • 0.301 mm(7)
    • 0.325 mm(1)
    • 0.375 mm(1)
    • 0.426 mm(9)
    • 0.5 mm(1)
    • 0.525 mm(6)
    • 0.65 mm(1)
    • 0.701 mm(6)
    • 0.75 mm(11)
    • 0.925 mm(7)
    • 0.976 mm(1)
    • 1.0 mm(5)
    • 1.401 mm(2)
    • 1.526 mm(5)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK20 (5)
    • HCM15 (2)
    • K00331 (6)
    • K15 (15)
    • K68 (8)
    • KC5010 (10)
    • KC5025 (21)
    • KC710 (9)
    • KC720 (18)
    • KC722 (8)
    • KC730 (19)
    • KC9105 (1)
    • KU25T (8)
    • P25 (11)
    • PN120 (10)
    • SP4066 (4)
    • TN6025 (39)
    • TTS (10)
    Hand Of Tool
    Hand Of Tool
    • L (14)
    • R (27)
    Wiper Insert
    Wiper Insert
    • N (40)
    F Dimension
    F Dimension
    • 7.0 mm(2)
    • 9.0 mm(2)
    • 11.0 mm(2)
    • 12.701 mm(1)
    • 13.0 mm(2)
    • 16.0 mm(2)
    • 17.0 mm(2)
    • 19.05 mm(1)
    • 20.0 mm(2)
    • 22.0 mm(4)
    • 25.0 mm(3)
    • 25.401 mm(4)
    • 27.0 mm(9)
    • 31.75 mm(2)
    • 32.0 mm(3)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.276 in(2)
    • 0.354 in(2)
    • 0.433 in(2)
    • 0.5 in(1)
    • 0.512 in(2)
    • 0.63 in(2)
    • 0.669 in(2)
    • 0.75 in(1)
    • 0.787 in(2)
    • 0.866 in(4)
    • 0.984 in(3)
    • 1.0 in(4)
    • 1.063 in(9)
    • 1.25 in(2)
    • 1.26 in(3)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 13.0 mm(2)
    • 16.0 mm(2)
    • 20.0 mm(1)
    • 25.0 mm(2)
    • 32.0 mm(2)
    • 40.0 mm(4)
    • 54.0 mm(4)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.512 in(2)
    • 0.63 in(2)
    • 0.787 in(1)
    • 0.984 in(2)
    • 1.26 in(2)
    • 1.575 in(4)
    • 2.126 in(4)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (25)
    • S (16)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (41)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.385 in(2)
    • 1.575 in(3)
    • 1.655 in(1)
    • 1.661 in(1)
    • 1.772 in(1)
    • 2.209 in(1)
    • 2.757 in(2)
    • 2.955 in(2)
    • 3.781 in(4)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 35.15 mm(2)
    • 40.0 mm(3)
    • 42.0 mm(1)
    • 42.2 mm(1)
    • 45.0 mm(1)
    • 56.1 mm(1)
    • 70.025 mm(2)
    • 75.05 mm(2)
    • 96.025 mm(4)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (16)
    frontEnd
    Clamp Style
    Clamp Style
    • C (10)
    • S (32)
    Insert Shape
    Insert Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (41)
    • ON EDGE MISC (1)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • H W (40)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (19)
    • TAPER SHANK (22)
    System Size
    System Size
    • KM40TS (22)
    Back-End Diameter
    Back-End Diameter
    • 40.0 mm(23)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.575 in(23)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.315 in(1)
    • 0.5 in(1)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(3)
    • 1.0 in(5)
    • 1.26 in(3)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 8.0 mm(1)
    • 12.701 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(5)
    • 32.0 mm(3)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.315 in(1)
    • 0.5 in(1)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(3)
    • 1.0 in(5)
    • 1.26 in(3)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 8.0 mm(1)
    • 12.701 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(5)
    • 32.0 mm(3)
    Shank Width MinkomuShank Width Max
    No filters matching ""

    LSA

    (3)LSA

    LSA

    (5)LSA

    LSE 90°

    (13)LSE 90°

    Integrální držáky nástrojů • N/A • Metrické

    (11)Integrální držáky nástrojů • N/A • Metrické

    LSS 90°

    (6)LSS 90°

    LSE-N 90° • Pouze vnitřní

    (4)LSE-N 90° • Pouze vnitřní
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?