Ramping: Blank
Slotting: Square End
Corner Style: Square End
Side Milling/Shoulder Milling: Square End
38495
Tool Dimensions: Flute Configuration: X (variable)Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 1724489 |
| ISO katalogové ID | 752508003LT |
| ANSI katalogové ID | 752508003LT |
| Grade | TIALN-LT1 |
| Adapter Style Machine Side | Straight-Cylindrical |
| [D1] Effective Cutting Diameter | 8 mm |
| [D1] Effective Cutting Diameter | .315 in |
| [D] Adapter / Shank / Bore Diameter | 8 mm |
| [D] Adapter / Shank / Bore Diameter | .315 in |
| [AP1MAX] 1st Maximum Cutting Depth | 28 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 1.102 in |
| [L] Overall Length | 100 mm |
| [L] Overall Length | 3.937 in |
| [Z] Number of Flutes | 4 |
Ramping: BlankSlotting: Square EndCorner Style: Square EndSide Milling/Shoulder Milling: Square End38495Tool Dimensions: Flute Configuration: X (variable)Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
 |  |  | ||||||||||||||||
| Side Milling (A) and Slotting (B) | TiAlN | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||
| A | B | Cutting Speed | D1 | |||||||||||||||
| Material | ap | ae | ap | Min | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | ||
| P | 3 | 2 x D | 0,3 x D | 0,75 x D | 160 | – | 180 | fz | 0,019 | 0,026 | 0,033 | 0,040 | 0,055 | 0,067 | 0,077 | 0,096 | 0,111 | 0,125 |
| 4 | 2 x D | 0,25 x D | 0,5 x D | 140 | – | 160 | fz | 0,017 | 0,024 | 0,030 | 0,036 | 0,049 | 0,059 | 0,069 | 0,084 | 0,097 | 0,107 | |
| H | 1 | 2 x D | 0,25 x D | 0,5 x D | 120 | – | 140 | fz | 0,017 | 0,024 | 0,030 | 0,036 | 0,049 | 0,059 | 0,069 | 0,084 | 0,097 | 0,107 |
| 2 | 2 x D | 0,2 x D | 0,4 x D | 80 | – | 130 | fz | 0,013 | 0,018 | 0,022 | 0,027 | 0,037 | 0,044 | 0,051 | 0,063 | 0,071 | 0,078 | |
| 3 | 2 x D | 0,1 x D | 0,2 x D | 70 | – | 100 | fz | 0,010 | 0,014 | 0,018 | 0,021 | 0,029 | 0,035 | 0,041 | 0,051 | 0,059 | 0,067 | |
| 4 | 2 x D | 0,05 x D | 0,05 x D | 50 | – | 70 | fz | 0,007 | 0,009 | 0,012 | 0,014 | 0,019 | 0,023 | 0,027 | 0,034 | 0,039 | 0,044 | |
| | | ||||||||||||||||
| Side Milling (A) and Slotting (B) | TiAlN | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||
| A | B | Cutting Speed | D1 | |||||||||||||||
| Material | ap | ae | ap | Min | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | ||
| P | 3 | 3 x D | 0,2 x D | 0,5 x D | 160 | – | 180 | fz | 0,019 | 0,026 | 0,033 | 0,040 | 0,055 | 0,067 | 0,077 | 0,096 | 0,111 | 0,125 |
| 4 | 3 x D | 0,2 x D | 0,3 x D | 140 | – | 160 | fz | 0,017 | 0,024 | 0,030 | 0,036 | 0,049 | 0,059 | 0,069 | 0,084 | 0,097 | 0,107 | |
| H | 1 | 3 x D | 0,2 x D | 0,3 x D | 120 | – | 140 | fz | 0,017 | 0,024 | 0,030 | 0,036 | 0,049 | 0,059 | 0,069 | 0,084 | 0,097 | 0,107 |
| 2 | 3 x D | 0,15 x D | 0,2 x D | 80 | – | 130 | fz | 0,013 | 0,018 | 0,022 | 0,027 | 0,037 | 0,044 | 0,051 | 0,063 | 0,071 | 0,078 | |
| 3 | 3 x D | 0,05 x D | – | 70 | – | 100 | fz | 0,010 | 0,014 | 0,018 | 0,021 | 0,029 | 0,035 | 0,041 | 0,051 | 0,059 | 0,067 | |
| 4 | 3 x D | 0,03 x D | – | 50 | – | 70 | fz | 0,007 | 0,009 | 0,012 | 0,014 | 0,019 | 0,023 | 0,027 | 0,034 | 0,039 | 0,044 | |
| | | |||||||||||||||||
| Side Milling (A) and Slotting (B) | TiAlN | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | |||||||||||||||||
| A | B | Cutting Speed | D1 | ||||||||||||||||
| Material | ap | ae | ap | Min | Max | mm | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
| P | 3 | 1 x D | 0,4 x D | 1 x D | 120 | – | 160 | fz | 0,026 | 0,033 | 0,040 | 0,055 | 0,067 | 0,077 | 0,087 | 0,096 | 0,104 | 0,111 | 0,125 |
| 4 | 1 x D | 0,4 x D | 0,75 x D | 90 | – | 150 | fz | 0,024 | 0,030 | 0,036 | 0,049 | 0,059 | 0,069 | 0,077 | 0,084 | 0,091 | 0,097 | 0,107 | |
| H | 1 | 1 x D | 0,4 x D | 0,75 x D | 80 | – | 140 | fz | 0,024 | 0,030 | 0,036 | 0,049 | 0,059 | 0,069 | 0,077 | 0,084 | 0,091 | 0,097 | 0,107 |
| 2 | 1 x D | 0,3 x D | 0,5 x D | 70 | – | 120 | fz | 0,018 | 0,022 | 0,027 | 0,037 | 0,044 | 0,051 | 0,057 | 0,063 | 0,067 | 0,071 | 0,078 | |
| 3 | 1 x D | 0,15 x D | 0,3 x D | 60 | – | 90 | fz | 0,014 | 0,018 | 0,021 | 0,029 | 0,035 | 0,041 | 0,046 | 0,051 | 0,055 | 0,059 | 0,067 | |
| 4 | 1 x D | 0,1 x D | 0,15 x D | 50 | – | 70 | fz | 0,009 | 0,012 | 0,014 | 0,019 | 0,023 | 0,027 | 0,031 | 0,034 | 0,037 | 0,039 | 0,044 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?