Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

VXF™-12 Series - Tool Bodies

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (21)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(21)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(21)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(21)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(21)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(21)
    • M Stainless Steel (21)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(21)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(21)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(21)
    • K Cast Iron (21)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(21)
    • N Non-Ferrous Materials (21)
      • N1
        Wrought Aluminum (21)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(21)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(21)
    • S High-Temp Alloys (21)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(21)
    • H Hardened Materials (21)
      • H1
        Hardened Materials 44-48 HRC(21)
    Select All Star
    • CN (7)
    • DE (7)
    • GB (1)
    • IN (2)
    • SG (4)
    • US (7)
    Applications
    Applications
    • Face MillingFace Milling (2)
    • PocketPocket (2)
    • Pocket HelicalPocket Helical (2)
    • Pocket Plunge MillingPocket Plunge Milling (2)
    • Profile MillingProfile Milling (2)
    • RampingRamping (2)
    • Shoulder RoughingShoulder Roughing (2)
    • Shoulder Square EndShoulder Square End (2)
    • Slot Square EndSlot Square End (2)
    Cutting Diameter
    Cutting Diameter
    • 0.536 in(2)
    • 0.546 in(1)
    • 0.785 in(1)
    • 0.86 in(1)
    • 0.939 in(1)
    • 1.254 in(1)
    • 1.284 in(2)
    • 1.332 in(1)
    • 1.764 in(1)
    • 1.784 in(2)
    • 1.883 in(1)
    • 2.283 in(2)
    • 2.433 in(1)
    • 3.221 in(1)
    • 3.283 in(2)
    • 4.284 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 13.625 mm(2)
    • 13.875 mm(1)
    • 19.951 mm(1)
    • 21.85 mm(1)
    • 23.826 mm(1)
    • 31.826 mm(1)
    • 32.625 mm(2)
    • 33.825 mm(1)
    • 44.801 mm(1)
    • 45.301 mm(2)
    • 47.801 mm(1)
    • 58.0 mm(2)
    • 61.801 mm(1)
    • 81.801 mm(1)
    • 83.4 mm(2)
    • 108.801 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 31.75 mm(2)
    • 32.0 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(1)
    • 42.0 mm(1)
    • 50.0 mm(1)
    • 50.801 mm(2)
    • 52.0 mm(1)
    • 63.0 mm(1)
    • 63.5 mm(2)
    • 66.0 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(2)
    • 127.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.25 in(2)
    • 1.26 in(1)
    • 1.5 in(1)
    • 1.575 in(1)
    • 1.655 in(1)
    • 1.969 in(1)
    • 2.0 in(2)
    • 2.047 in(1)
    • 2.48 in(1)
    • 2.5 in(2)
    • 2.598 in(1)
    • 3.0 in(2)
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.0 in(2)
    • 5.0 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.5 mm(20)
    • 2.7 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.098 in(20)
    • 0.106 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.575 in(10)
    • 1.693 in(1)
    • 1.7 in(1)
    • 1.772 in(1)
    • 1.969 in(6)
    • 2.48 in(1)
    • 3.5 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(10)
    • 43.0 mm(1)
    • 43.176 mm(1)
    • 45.0 mm(1)
    • 50.0 mm(6)
    • 63.0 mm(1)
    • 88.9 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 12.0 (18)
    • 16.0 (2)
    • 18.0 (1)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (18)
    • Screw-On Connection (2)
    • Straight-Cylindrical (1)
    Number of Flutes
    Number of Flutes
    • 3 (3)
    • 4 (4)
    • 5 (5)
    • 6 (4)
    • 7 (2)
    • 8 (2)
    • 9 (1)
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(10)
    • 1.772 in(1)
    • 1.969 in(6)
    • 2.48 in(1)
    • 2.657 in(1)
    • 2.664 in(1)
    • 10.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(10)
    • 45.0 mm(1)
    • 50.0 mm(6)
    • 63.0 mm(1)
    • 67.5 mm(1)
    • 67.675 mm(1)
    • 254.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.047 in(21)
    • 0.06 in(21)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 1.201 mm(21)
    • 1.5 mm(21)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WP25PM (21)
    • WP40PM (21)
    • WS40PM (21)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.24 (1)
    • 0.3 (1)
    • 0.31 (2)
    • 0.45 (2)
    • 0.5 (2)
    • 0.6 (3)
    • 0.8 (1)
    • 0.9 (3)
    • 0.95 (1)
    • 1.3 (1)
    • 1.4 (1)
    • 1.8 (1)
    • 2.6 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 1.143 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 29.0 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (1)
    • SCREW-ON (2)
    • SHELL MILL (18)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(3)
    • 22.0 mm(5)
    • 25.401 mm(4)
    • 27.0 mm(2)
    • 29.0 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(1)
    • 38.1 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(3)
    • 0.866 in(5)
    • 1.0 in(4)
    • 1.063 in(2)
    • 1.143 in(2)
    • 1.25 in(3)
    • 1.26 in(1)
    • 1.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    VXF™-12 • Shell Mills • Inch
    (10)

    VXF™-12 • Shell Mills • Inch

    VXF™-12 • Nástrčné frézy • Metrické
    (8)

    VXF™-12 • Nástrčné frézy • Metrické

    VXF™-12 • Stopkové frézy se závitovou stopkou • Metrické
    (1)

    VXF™-12 • Stopkové frézy se závitovou stopkou • Metrické

    VXF™-12 • Cylindrical End Mills • Inch
    (1)

    VXF™-12 • Cylindrical End Mills • Inch

    VXF™-12 • Screw-On End Mills • Inch
    (1)

    VXF™-12 • Screw-On End Mills • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?