S-Style Clamping • For Positive Style Inserts

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (110)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(110)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(110)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(110)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(110)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(110)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(110)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(110)
    • M Stainless Steel (105)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(105)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(102)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(102)
    • K Cast Iron (110)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(110)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(110)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(110)
    • N Non-Ferrous Materials (110)
      • N1
        Wrought Aluminum (110)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(110)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(84)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (109)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (88)
      • N6
        Carbon, Graphite Composites, CFRP (86)
      • N7
        MMC's (85)
    • S High-Temp Alloys (109)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(109)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(109)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(109)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(105)
    • H Hardened Materials (80)
      • H1
        Hardened Materials 44-48 HRC(80)
      • H2
        Hardened Materials 48-55 HRC(80)
      • H3
        Hardened Materials 56-60 HRC(80)
      • H4
        Hardened Materials >60 HRC(80)
    Select All Star
    • DE (18)
    • SG (4)
    • US (3)
    Applications
    Applications
    • FacingFacing (44)
    • Multiple Direction CuttingMultiple Direction Cutting (96)
    • ProfilingProfiling (97)
    • TurningTurning (105)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (100)
    • Lightly Interrupted Cut (110)
    • Smooth Cut (110)
    • Varying Depth of Cut (109)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (6)
    • 62.5 (7)
    • 72.5 (4)
    • 75.0 (5)
    • 90.0 (17)
    • 93.0 (36)
    • 95.0 (23)
    • 107.5 (14)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (5)
    • Toolholder (107)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (85)
    • 2.0 (85)
    • 3.0 (4)
    • 4.0 (35)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.5 in(1)
    • 2.757 in(3)
    • 3.15 in(8)
    • 3.5 in(5)
    • 3.938 in(16)
    • 4.0 in(2)
    • 4.5 in(4)
    • 4.912 in(1)
    • 4.921 in(26)
    • 5.513 in(1)
    • 5.896 in(1)
    • 5.906 in(28)
    • 6.0 in(5)
    • 6.694 in(10)
    • 7.875 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 63.5 mm(1)
    • 70.0 mm(3)
    • 80.0 mm(8)
    • 88.9 mm(5)
    • 100.0 mm(16)
    • 101.601 mm(2)
    • 114.301 mm(4)
    • 124.75 mm(1)
    • 125.0 mm(26)
    • 140.0 mm(1)
    • 149.75 mm(1)
    • 150.0 mm(28)
    • 152.4 mm(5)
    • 170.0 mm(10)
    • 200.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.004 in(62)
    • 0.008 in(80)
    • 0.016 in(100)
    • 0.031 in(100)
    • 0.047 in(77)
    • 0.063 in(9)
    • 0.119 in(3)
    • 0.157 in(3)
    • 0.197 in(2)
    • 0.237 in(2)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.1 mm(62)
    • 0.2 mm(80)
    • 0.4 mm(100)
    • 0.8 mm(100)
    • 1.201 mm(77)
    • 1.6 mm(9)
    • 3.0 mm(3)
    • 4.0 mm(3)
    • 5.0 mm(2)
    • 6.0 mm(2)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CG5 (1)
    • CG6 (1)
    • CM1 (1)
    • HCK10 (53)
    • HK1500 (58)
    • HK35 (56)
    • HWK10 (3)
    • HWK15 (57)
    • K420 (21)
    • PB100 (29)
    • PB170 (13)
    • PB250 (34)
    • PB300 (5)
    • PD100 (54)
    • PD50 (40)
    • SP0G00 (7)
    • SP0PW3 (5)
    • SP3900 (4)
    • SPN3W1 (10)
    • THM (105)
    • THM-X (44)
    • TN1000 (5)
    • TN10P (95)
    • TN10U (95)
    • TN15M (86)
    • TN15U (70)
    • TN2000 (66)
    • TN20K (95)
    • TN20P (95)
    • TN30M (86)
    • TN4000 (44)
    • TN5015 (74)
    • TN5020 (98)
    • TN5105 (64)
    • TN5120 (105)
    • TN6010 (52)
    • TN6025 (47)
    • TN7005 (60)
    • TN7010 (105)
    • TN7015 (105)
    • TN7025 (105)
    • TN7035 (97)
    • TN7105 (93)
    • TN7110 (102)
    • TN7115 (105)
    • TN7125 (105)
    • TN7135 (99)
    • TN8025 (73)
    • TTI15 (70)
    • TTM (10)
    • TTM09 (33)
    • TTR (69)
    • TTS (15)
    • TTX (69)
    • W00162 (4)
    • W00342 (44)
    • WBH10C (58)
    • WBH10P (72)
    • WBH10U (72)
    • WBH20P (48)
    • WBH25P (72)
    • WBH25U (55)
    • WBH30P (67)
    • WBK45U (39)
    • WDN00U (19)
    • WDN25U (75)
    • WK05CT (69)
    • WK15CT (77)
    • WK20CT (110)
    • WM15CT (91)
    • WM25CT (100)
    • WP15CT (110)
    • WP20TT (26)
    • WP25CT (110)
    • WP35CT (91)
    • WS10PT (57)
    • WS25PT (52)
    • WU05PT (56)
    • WU10HT (77)
    • WU10PT (73)
    • WU20HT (5)
    • WU25PT (86)
    Hand Of Tool
    Hand Of Tool
    • L (38)
    • N (23)
    • R (51)
    Wiper Insert
    Wiper Insert
    • N (110)
    • Y (34)
    F Dimension
    F Dimension
    • 4.0 mm(1)
    • 6.0 mm(1)
    • 6.351 mm(1)
    • 7.0 mm(2)
    • 8.0 mm(1)
    • 9.0 mm(2)
    • 10.0 mm(2)
    • 11.0 mm(2)
    • 12.0 mm(5)
    • 12.5 mm(6)
    • 12.701 mm(2)
    • 13.0 mm(2)
    • 14.0 mm(1)
    • 15.0 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(7)
    • 16.5 mm(1)
    • 17.0 mm(2)
    • 17.5 mm(1)
    • 18.0 mm(1)
    • 18.5 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(12)
    • 22.0 mm(1)
    • 25.0 mm(18)
    • 25.401 mm(4)
    • 31.75 mm(4)
    • 32.0 mm(24)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.157 in(1)
    • 0.237 in(1)
    • 0.25 in(1)
    • 0.276 in(2)
    • 0.315 in(1)
    • 0.354 in(2)
    • 0.394 in(2)
    • 0.433 in(2)
    • 0.473 in(5)
    • 0.492 in(6)
    • 0.5 in(2)
    • 0.512 in(2)
    • 0.551 in(1)
    • 0.591 in(2)
    • 0.625 in(4)
    • 0.63 in(7)
    • 0.65 in(1)
    • 0.669 in(2)
    • 0.69 in(1)
    • 0.709 in(1)
    • 0.728 in(1)
    • 0.75 in(2)
    • 0.787 in(12)
    • 0.866 in(1)
    • 0.984 in(18)
    • 1.0 in(4)
    • 1.25 in(4)
    • 1.26 in(24)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 13.0 mm(2)
    • 16.0 mm(2)
    • 20.0 mm(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.512 in(2)
    • 0.63 in(2)
    • 0.787 in(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (33)
    • E (4)
    • S (75)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE POSITIVE (1)
    • NEGATIVE-ZERO (5)
    • NEUTRAL (ZERO) (105)
    • POSITIVE-ZERO (1)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.575 in(2)
    • 1.891 in(2)
    • 2.52 in(1)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 40.0 mm(2)
    • 48.0 mm(2)
    • 64.0 mm(1)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (5)
    Front-End
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (25)
    • D-DIAMOND/RHOMBIC 55 (39)
    • R-ROUND (11)
    • S-SQUARE 90 (11)
    • T-TRIANGLE 60 (4)
    • V-DIAMOND/RHOMBIC 35 (22)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.63 in(2)
    • 0.776 in(2)
    • 0.787 in(2)
    • 0.984 in(3)
    • 1.102 in(1)
    • 1.379 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 16.0 mm(2)
    • 19.701 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(3)
    • 28.0 mm(1)
    • 35.0 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (80)
    • B L (80)
    • C N (15)
    • D P (80)
    • H T (70)
    • H W (110)
    Back-End
    Connection Type
    Connection Type
    • BORING BAR (5)
    • SQUARE SHANK (107)
    Back-End Diameter
    Back-End Diameter
    • 10.0 mm(2)
    • 12.0 mm(2)
    • 16.0 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.394 in(2)
    • 0.473 in(2)
    • 0.63 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.315 in(1)
    • 0.375 in(1)
    • 0.394 in(4)
    • 0.473 in(8)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(16)
    • 0.75 in(4)
    • 0.787 in(25)
    • 0.984 in(26)
    • 1.0 in(5)
    • 1.26 in(10)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 8.0 mm(1)
    • 9.525 mm(1)
    • 10.0 mm(4)
    • 12.0 mm(8)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(16)
    • 19.05 mm(4)
    • 20.0 mm(25)
    • 25.0 mm(26)
    • 25.401 mm(5)
    • 32.0 mm(10)
    Shank Height MintoShank Height Max
    Shank Width
    Shank Width
    • 0.315 in(1)
    • 0.375 in(1)
    • 0.394 in(4)
    • 0.473 in(8)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(16)
    • 0.75 in(4)
    • 0.787 in(25)
    • 0.984 in(36)
    • 1.0 in(5)
    Shank Width MintoShank Width Max
    Shank Width
    Shank Width
    • 8.0 mm(1)
    • 9.525 mm(1)
    • 10.0 mm(4)
    • 12.0 mm(8)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(16)
    • 19.05 mm(4)
    • 20.0 mm(25)
    • 25.0 mm(36)
    • 25.401 mm(5)
    Shank Width MintoShank Width Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)