VXF™-16 Series - Tool Bodies
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (10)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
- M Stainless Steel (10)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
- K Cast Iron (10)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(10)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(10)
- N Non-Ferrous Materials (10)
- N1Wrought Aluminum (10)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
- N3High-Silicon Aluminum Alloys Si >12.2%(10)
- S High-Temp Alloys (10)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
- H Hardened Materials (10)
- H1Hardened Materials 44-48 HRC(10)
Applications
Applications
Face Milling (10)
Pocket (10)
Pocket Helical (10)
Pocket Plunge Milling (10)
Profile Milling (10)
Ramping (10)
Shoulder Roughing (10)
Slot Square End (10)
Cutting Diameter
Cutting Diameter
- 1.072 in(1)
- 1.103 in(1)
- 1.583 in(1)
- 1.602 in(1)
- 2.102 in(1)
- 2.251 in(1)
- 3.036 in(1)
- 3.099 in(1)
- 4.021 in(1)
- 4.098 in(1)
to
Cutting Diameter
Cutting Diameter
- 27.225 mm(1)
- 28.026 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 53.401 mm(1)
- 57.176 mm(1)
- 77.125 mm(1)
- 78.726 mm(1)
- 102.125 mm(1)
- 104.101 mm(1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
- 50.0 mm(1)
- 50.801 mm(1)
- 63.0 mm(1)
- 63.5 mm(1)
- 76.2 mm(1)
- 80.0 mm(1)
- 100.0 mm(1)
- 101.601 mm(1)
- 125.0 mm(1)
- 127.0 mm(1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
- 1.969 in(1)
- 2.0 in(1)
- 2.48 in(1)
- 2.5 in(1)
- 3.0 in(1)
- 3.15 in(1)
- 3.938 in(1)
- 4.0 in(1)
- 4.921 in(1)
- 5.0 in(1)
to
Reach
Reach
- 1.575 in(2)
- 1.772 in(2)
- 1.969 in(3)
- 2.48 in(3)
to
Reach
Reach
- 40.0 mm(2)
- 45.0 mm(2)
- 50.0 mm(3)
- 63.0 mm(3)
to
Number of Flutes
Number of Flutes
- 10 (2)
- 4 (2)
- 5 (2)
- 6 (2)
- 7 (1)
- 8 (1)
Over All Length [L]
Over All Length [L]
- 1.575 in(2)
- 1.772 in(2)
- 1.969 in(3)
- 2.48 in(3)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(2)
- 45.0 mm(2)
- 50.0 mm(3)
- 63.0 mm(3)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- WP25PM (10)
- WS40PM (10)
Maximum Ramp Angle
Maximum Ramp Angle
- 0.32 (1)
- 0.37 (1)
- 0.42 (1)
- 0.51 (1)
- 0.58 (1)
- 0.65 (1)
- 0.86 (1)
- 1.0 (1)
- 1.36 (2)
to
Back-End
Back-End Diameter
Back-End Diameter
- 19.05 mm(1)
- 22.0 mm(2)
- 25.401 mm(2)
- 27.0 mm(1)
- 32.0 mm(1)
- 38.1 mm(2)
- 40.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(1)
- 0.866 in(2)
- 1.0 in(2)
- 1.063 in(1)
- 1.26 in(1)
- 1.5 in(2)
- 1.575 in(1)
to
No filters matching ""
