M1200

Best-in-class face milling platform to boost productivity on taper 50 spindle milling machines and driven tools.

  • Low cost per edge, high productivity solution.
  • One series that meets every face milling need.
  • 75°,45°, and 31° lead angles.
  • High tool life in light to heavy machining.

 

M1200 Mini

Best-in-class face milling platform to boost productivity on taper 40 spindle milling machines and driven tools.

  • First choice for low depth of cut face milling.
  • Low cost per edge and high productivity.
  • Recutting force due to soft cutting action.
  • Significantly increased Metal Removal Rates (MRR).

 

M1200 MAX

M1200 Max Screw Clamping is a 12-edged face mill for customers who need to run at a higher DOC up to 7,5mm with a tool with the best cost-per-edge.

  • Mill for Steel, Stainless Steel, Grey Cast Iron and Nodular Iron
  • Universal HNMU11 -MM geometry in grades WP35CM, WU20PM, WK15CM.
  • Comprehensive offering: Cutters with 56° lead angle with a 7mm strong and thick insert.
  • Pressed-and-sintered-to-size (PSTS) insert in 11mm IC.
  • High DOC capability (7,5mm Ap1 max).

 

NEW - MM Geometry PSTS Inserts

Universal and versatile solutions for most roughing and semi-finishing milling applications.

  • Strong cutting-edge with T-land all around
  • Available in grades WU20PM, WK15CM, WP35CM
  • Delivering reduced cost per edge
Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (234)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(218)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(234)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(234)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(233)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(233)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(233)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(234)
    • M Stainless Steel (234)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(234)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(234)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(234)
    • K Cast Iron (235)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(235)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(231)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(231)
    • N Non-Ferrous Materials (171)
      • N1
        Wrought Aluminum (170)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(171)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(171)
    • S High-Temp Alloys (228)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(206)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(205)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(205)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(227)
    • H Hardened Materials (166)
      • H1
        Hardened Materials 44-48 HRC(166)
    Select All Star
    • CN (68)
    • DE (127)
    • GB (29)
    • IN (35)
    • SG (74)
    • US (79)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (91)
    • Face MillingFace Milling (158)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(7)
    • 1.0 in(4)
    • 1.25 in(1)
    • 1.26 in(8)
    • 1.5 in(4)
    • 1.5748 in(3)
    • 1.575 in(4)
    • 1.968 in(1)
    • 1.9685 in(5)
    • 1.969 in(2)
    • 2.0 in(8)
    • 2.48 in(5)
    • 2.4803 in(6)
    • 2.5 in(8)
    • 3.0 in(13)
    • 3.1496 in(7)
    • 3.15 in(7)
    • 3.937 in(13)
    • 4.0 in(12)
    • 4.92 in(1)
    • 4.921 in(7)
    • 4.9213 in(4)
    • 5.0 in(6)
    • 6.0 in(5)
    • 6.299 in(1)
    • 6.2992 in(4)
    • 7.874 in(3)
    • 8.0 in(2)
    • 9.8425 in(2)
    • 9.843 in(1)
    • 10.0 in(2)
    • 12.0 in(1)
    • 12.402 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(7)
    • 25.4 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(8)
    • 38.1 mm(4)
    • 40.0 mm(7)
    • 50.0 mm(8)
    • 50.8 mm(8)
    • 63.0 mm(11)
    • 63.5 mm(8)
    • 76.2 mm(13)
    • 80.0 mm(14)
    • 100.0 mm(13)
    • 101.6 mm(12)
    • 125.0 mm(12)
    • 127.0 mm(6)
    • 152.4 mm(5)
    • 160.0 mm(5)
    • 200.0 mm(3)
    • 203.197 mm(1)
    • 203.2 mm(1)
    • 250.0 mm(3)
    • 254.0 mm(2)
    • 304.8 mm(1)
    • 315.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 33.72 mm(6)
    • 34.12 mm(3)
    • 39.13 mm(1)
    • 39.53 mm(1)
    • 40.47 mm(1)
    • 40.72 mm(6)
    • 46.14 mm(2)
    • 46.79 mm(1)
    • 46.816 mm(2)
    • 46.817 mm(1)
    • 48.716 mm(2)
    • 50.96 mm(2)
    • 51.0 mm(1)
    • 52.24 mm(1)
    • 54.14 mm(1)
    • 56.76 mm(1)
    • 57.56 mm(1)
    • 58.71 mm(3)
    • 59.51 mm(3)
    • 61.0 mm(2)
    • 61.8 mm(2)
    • 64.14 mm(1)
    • 64.94 mm(1)
    • 67.89 mm(1)
    • 68.69 mm(1)
    • 69.75 mm(1)
    • 71.54 mm(1)
    • 71.706 mm(3)
    • 72.04 mm(1)
    • 72.205 mm(3)
    • 74.0 mm(3)
    • 74.5 mm(2)
    • 74.799 mm(1)
    • 77.13 mm(1)
    • 77.63 mm(1)
    • 80.874 mm(1)
    • 81.374 mm(1)
    • 82.95 mm(1)
    • 84.73 mm(2)
    • 84.9 mm(3)
    • 86.75 mm(2)
    • 87.2 mm(3)
    • 88.0 mm(2)
    • 88.52 mm(2)
    • 88.7 mm(3)
    • 90.32 mm(1)
    • 91.0 mm(3)
    • 91.8 mm(2)
    • 94.082 mm(1)
    • 94.12 mm(1)
    • 97.88 mm(1)
    • 106.74 mm(2)
    • 108.36 mm(1)
    • 108.51 mm(2)
    • 108.696 mm(3)
    • 110.296 mm(3)
    • 110.98 mm(3)
    • 111.799 mm(1)
    • 111.8 mm(1)
    • 112.58 mm(5)
    • 113.4 mm(2)
    • 117.856 mm(1)
    • 119.456 mm(1)
    • 131.74 mm(2)
    • 133.5 mm(1)
    • 133.712 mm(3)
    • 133.735 mm(1)
    • 135.706 mm(1)
    • 135.94 mm(2)
    • 135.98 mm(1)
    • 136.747 mm(1)
    • 136.799 mm(1)
    • 137.95 mm(3)
    • 142.878 mm(1)
    • 144.882 mm(1)
    • 163.33 mm(1)
    • 163.37 mm(2)
    • 164.147 mm(1)
    • 164.2 mm(1)
    • 168.5 mm(1)
    • 170.97 mm(2)
    • 171.747 mm(1)
    • 171.8 mm(1)
    • 210.988 mm(1)
    • 211.747 mm(1)
    • 211.8 mm(1)
    • 214.179 mm(1)
    • 214.195 mm(1)
    • 260.992 mm(1)
    • 261.747 mm(1)
    • 261.8 mm(1)
    • 264.662 mm(1)
    • 264.992 mm(1)
    • 315.791 mm(1)
    • 325.995 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.787 in(1)
    • 0.866 in(1)
    • 0.984 in(3)
    • 1.328 in(6)
    • 1.343 in(3)
    • 1.54 in(1)
    • 1.556 in(1)
    • 1.593 in(1)
    • 1.603 in(6)
    • 1.813 in(2)
    • 1.817 in(2)
    • 1.842 in(1)
    • 1.843 in(1)
    • 1.918 in(2)
    • 2.006 in(2)
    • 2.008 in(1)
    • 2.057 in(1)
    • 2.131 in(1)
    • 2.235 in(1)
    • 2.266 in(1)
    • 2.3114 in(3)
    • 2.343 in(3)
    • 2.401 in(2)
    • 2.434 in(2)
    • 2.525 in(1)
    • 2.557 in(1)
    • 2.673 in(1)
    • 2.704 in(1)
    • 2.746 in(1)
    • 2.816 in(1)
    • 2.8231 in(3)
    • 2.836 in(1)
    • 2.843 in(3)
    • 2.913 in(3)
    • 2.933 in(2)
    • 2.9448 in(1)
    • 3.037 in(1)
    • 3.056 in(1)
    • 3.184 in(1)
    • 3.204 in(1)
    • 3.266 in(1)
    • 3.336 in(2)
    • 3.343 in(3)
    • 3.415 in(2)
    • 3.433 in(3)
    • 3.4646 in(2)
    • 3.485 in(2)
    • 3.4921 in(1)
    • 3.556 in(1)
    • 3.582 in(2)
    • 3.583 in(1)
    • 3.6142 in(2)
    • 3.704 in(1)
    • 3.706 in(1)
    • 3.853 in(1)
    • 4.202 in(2)
    • 4.266 in(1)
    • 4.272 in(2)
    • 4.342 in(3)
    • 4.369 in(1)
    • 4.3694 in(2)
    • 4.4015 in(1)
    • 4.4016 in(1)
    • 4.432 in(1)
    • 4.4324 in(4)
    • 4.4646 in(2)
    • 4.64 in(1)
    • 4.703 in(1)
    • 5.186 in(2)
    • 5.256 in(1)
    • 5.264 in(3)
    • 5.265 in(1)
    • 5.343 in(1)
    • 5.3518 in(1)
    • 5.352 in(1)
    • 5.3534 in(1)
    • 5.3837 in(1)
    • 5.3858 in(1)
    • 5.431 in(1)
    • 5.4312 in(2)
    • 5.625 in(1)
    • 5.704 in(1)
    • 6.4302 in(1)
    • 6.4318 in(2)
    • 6.4625 in(1)
    • 6.4646 in(1)
    • 6.634 in(1)
    • 6.731 in(2)
    • 6.7617 in(1)
    • 6.7638 in(1)
    • 8.307 in(1)
    • 8.3365 in(1)
    • 8.3386 in(1)
    • 8.432 in(1)
    • 8.433 in(1)
    • 10.275 in(1)
    • 10.305 in(1)
    • 10.3071 in(1)
    • 10.433 in(2)
    • 12.433 in(1)
    • 12.834 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.7 mm(12)
    • 2.2 mm(10)
    • 3.5 mm(49)
    • 4.4 mm(2)
    • 4.44 mm(1)
    • 4.5 mm(41)
    • 4.6 mm(1)
    • 4.7 mm(13)
    • 6.0 mm(10)
    • 7.5 mm(19)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.068 in(12)
    • 0.086 in(1)
    • 0.087 in(9)
    • 0.136 in(2)
    • 0.138 in(47)
    • 0.172 in(2)
    • 0.175 in(1)
    • 0.176 in(2)
    • 0.177 in(38)
    • 0.178 in(1)
    • 0.18 in(1)
    • 0.185 in(8)
    • 0.186 in(5)
    • 0.236 in(10)
    • 0.2953 in(19)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.25 in(4)
    • 1.26 in(7)
    • 1.5 in(2)
    • 1.57 in(4)
    • 1.5748 in(7)
    • 1.575 in(41)
    • 1.75 in(23)
    • 1.968 in(1)
    • 1.9681 in(1)
    • 1.9685 in(9)
    • 1.969 in(17)
    • 2.0 in(2)
    • 2.38 in(15)
    • 2.48 in(10)
    • 2.4803 in(13)
    • 3.15 in(2)
    Reach MintoReach Max
    Reach
    Reach
    • 31.75 mm(4)
    • 32.0 mm(7)
    • 38.1 mm(2)
    • 39.878 mm(4)
    • 40.0 mm(48)
    • 44.44 mm(1)
    • 44.45 mm(22)
    • 49.991 mm(1)
    • 50.0 mm(27)
    • 50.8 mm(2)
    • 60.45 mm(5)
    • 60.452 mm(10)
    • 63.0 mm(23)
    • 80.0 mm(1)
    • 80.01 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 15.0 (22)
    • 45.0 (94)
    • 56.0 (19)
    • 58.0 (23)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (88)
    • B-Cutter Retention Screw (28)
    • C-Bolt Circle (14)
    • KL Screw (3)
    • SHCS or RetScrw Or BoltCircle (3)
    • Screw-On Connection (6)
    • Straight-Cylindrical (9)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 10 (9)
    • 11 (2)
    • 12 (8)
    • 14 (5)
    • 16 (5)
    • 18 (2)
    • 2 (4)
    • 20 (2)
    • 22 (1)
    • 24 (1)
    • 28 (1)
    • 3 (12)
    • 4 (19)
    • 5 (25)
    • 6 (24)
    • 7 (4)
    • 8 (24)
    • 9 (10)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (57)
    • 6.0 (53)
    • 12.0 (255)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.57 in(4)
    • 1.5748 in(7)
    • 1.575 in(33)
    • 1.75 in(23)
    • 1.968 in(1)
    • 1.9681 in(1)
    • 1.9685 in(9)
    • 1.969 in(16)
    • 2.0 in(2)
    • 2.157 in(1)
    • 2.165 in(1)
    • 2.224 in(1)
    • 2.38 in(15)
    • 2.406 in(1)
    • 2.48 in(12)
    • 2.4803 in(13)
    • 3.15 in(2)
    • 3.228 in(1)
    • 3.28 in(2)
    • 3.783 in(1)
    • 3.819 in(2)
    • 4.213 in(1)
    • 4.724 in(2)
    • 4.8 in(1)
    • 5.118 in(4)
    • 7.874 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.878 mm(4)
    • 40.0 mm(40)
    • 44.44 mm(1)
    • 44.45 mm(22)
    • 49.991 mm(1)
    • 50.0 mm(26)
    • 50.8 mm(2)
    • 54.8 mm(1)
    • 55.0 mm(1)
    • 56.5 mm(1)
    • 60.45 mm(5)
    • 60.452 mm(10)
    • 61.1 mm(1)
    • 63.0 mm(25)
    • 80.0 mm(1)
    • 80.01 mm(1)
    • 82.0 mm(1)
    • 83.3 mm(2)
    • 96.1 mm(1)
    • 97.0 mm(2)
    • 107.0 mm(1)
    • 120.0 mm(2)
    • 121.92 mm(1)
    • 130.0 mm(4)
    • 200.0 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.039 in(24)
    • 0.047 in(216)
    • 0.051 in(57)
    • 0.063 in(53)
    • 0.126 in(79)
    • 0.171 in(75)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 1.0 mm(24)
    • 1.2 mm(216)
    • 1.3 mm(57)
    • 1.6 mm(53)
    • 3.2 mm(79)
    • 4.35 mm(75)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(259)
    • 1.2 mm(12)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(259)
    • 0.0461 in(12)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM-U (122)
    • TN6501 (121)
    • TN6510 (122)
    • TN6520 (152)
    • TN6525 (146)
    • TN6540 (152)
    • WK15CM (169)
    • WK20PM (68)
    • WK25YM (46)
    • WP25PM (150)
    • WP35CM (171)
    • WP40PM (151)
    • WS30PM (143)
    • WS40PM (153)
    • WU20PM (61)
    Hand Of Tool
    Hand Of Tool
    • R (158)
    Wiper Insert
    Wiper Insert
    • N (88)
    • Y (25)
    Front-End
    Neck Diameter
    Neck Diameter
    • 0.7598 in(4)
    • 0.9567 in(2)
    • 0.957 in(2)
    • 1.006 in(3)
    • 1.0591 in(1)
    • 1.2559 in(2)
    • 1.256 in(2)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 19.3 mm(4)
    • 24.3 mm(4)
    • 25.55 mm(3)
    • 26.9 mm(1)
    • 31.9 mm(4)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • H-HEXAGON 120 (113)
    Insert IC Size
    Insert IC Size
    • 12.7 mm(44)
    • 15.875 mm(27)
    • 15.88 mm(37)
    • 19.05 mm(5)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(44)
    • 0.625 in(64)
    • 0.75 in(5)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.0 mm(1)
    • 6.782 mm(8)
    • 6.8 mm(17)
    • 6.835 mm(14)
    • 6.837 mm(4)
    • 8.495 mm(10)
    • 8.582 mm(18)
    • 8.593 mm(27)
    • 9.17 mm(1)
    • 9.563 mm(8)
    • 10.75 mm(5)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2362 in(1)
    • 0.267 in(8)
    • 0.269 in(17)
    • 0.2691 in(14)
    • 0.2692 in(4)
    • 0.334 in(6)
    • 0.3345 in(4)
    • 0.3379 in(18)
    • 0.3383 in(27)
    • 0.361 in(1)
    • 0.3765 in(8)
    • 0.4233 in(5)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (35)
    • HD (36)
    • LD (30)
    • MM (11)
    Cutting Tool Material
    Cutting Tool Material
    • C N (1)
    • H W (112)
    Tolerance Class
    Tolerance Class
    • D (8)
    • E (1)
    • G (51)
    • M (5)
    • P (48)
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (16)
    • SCREW-ON (6)
    • SHELL MILL (136)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(2)
    • 19.05 mm(17)
    • 19.069 mm(1)
    • 19.1 mm(2)
    • 20.0 mm(3)
    • 22.0 mm(25)
    • 25.0 mm(9)
    • 25.4 mm(14)
    • 27.0 mm(14)
    • 29.0 mm(6)
    • 31.75 mm(2)
    • 32.0 mm(13)
    • 38.1 mm(16)
    • 40.0 mm(17)
    • 50.8 mm(5)
    • 60.0 mm(7)
    • 63.5 mm(5)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(2)
    • 0.75 in(20)
    • 0.7874 in(3)
    • 0.8661 in(24)
    • 0.867 in(1)
    • 0.9843 in(9)
    • 1.0 in(14)
    • 1.063 in(12)
    • 1.064 in(2)
    • 1.1417 in(6)
    • 1.25 in(2)
    • 1.2598 in(11)
    • 1.26 in(2)
    • 1.5 in(16)
    • 1.5748 in(15)
    • 1.575 in(2)
    • 2.0 in(5)
    • 2.3622 in(7)
    • 2.5 in(5)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)