Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Soluções poderosas de ferramentas já à venda. Compre agora

    Unidades de corte PSC 50

    Selecionar filtros
    Filtros
    Filtros
      Exibir filtros em
      Métrico
      Polegada
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (65)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(65)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(65)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(65)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(65)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(65)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(65)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(65)
      • M Stainless Steel (65)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(65)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(65)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(65)
      • K Cast Iron (65)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(65)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(65)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(65)
      • N Non-Ferrous Materials (64)
        • N1
          Wrought Aluminum (64)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(64)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(49)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (64)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (64)
        • N6
          Carbon, Graphite Composites, CFRP (64)
        • N7
          MMC's (56)
      • S High-Temp Alloys (65)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(65)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(65)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(65)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(65)
      • H Hardened Materials (57)
        • H1
          Hardened Materials 44-48 HRC(57)
        • H2
          Hardened Materials 48-55 HRC(57)
        • H3
          Hardened Materials 56-60 HRC(57)
        • H4
          Hardened Materials >60 HRC(44)
      • C CFRP Materials (53)
        • C1
          CFRP, CFRP / CFRP (53)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (45)
      Applications
      Applications
      • FacingFacing (53)
      • GroovingGrooving (8)
      • ID FacingID Facing (47)
      • ID GroovingID Grooving (5)
      • Multiple Direction CuttingMultiple Direction Cutting (53)
      • OD Thread TurningOD Thread Turning (4)
      • Plunge TurningPlunge Turning (14)
      • ProfilingProfiling (4)
      • TRN BoringTRN Boring (47)
      • TurningTurning (53)
      Type of Thread
      Type of Thread
      • 55 (4)
      • 60 (12)
      • ACME (12)
      • API (10)
      • API BUTTRESS (2)
      • API RD (8)
      • BSPT (2)
      • BSW (10)
      • BUTTRESS (8)
      • M (10)
      • NPT (8)
      • NPTF (2)
      • RD DIN 405 (4)
      • STUB ACME (10)
      • TR DIN 103 (4)
      • UN (10)
      • UNJ (8)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (61)
      • Lightly Interrupted Cut (61)
      • Smooth Cut (61)
      • Varying Depth of Cut (61)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 45.0 (4)
      • 62.5 (1)
      • 72.5 (1)
      • 75.0 (7)
      • 90.0 (12)
      • 93.0 (19)
      • 95.0 (16)
      • 107.5 (5)
      Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • PSC (21)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (45)
      • 2.0 (53)
      • 3.0 (6)
      • 4.0 (37)
      • 6.0 (4)
      • 8.0 (22)
      Cutting Edges Per Insert MinaCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.969 in(1)
      • 2.047 in(10)
      • 2.362 in(48)
      • 2.441 in(3)
      • 2.559 in(3)
      Over All Length [L] MinaOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 50.0 mm(1)
      • 52.0 mm(10)
      • 60.0 mm(48)
      • 62.0 mm(3)
      • 65.0 mm(3)
      Over All Length [L] MinaOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.0 in(2)
      • 0.001 in(4)
      • 0.002 in(16)
      • 0.003 in(10)
      • 0.004 in(43)
      • 0.005 in(7)
      • 0.006 in(9)
      • 0.007 in(9)
      • 0.008 in(41)
      • 0.01 in(9)
      • 0.011 in(8)
      • 0.012 in(7)
      • 0.014 in(18)
      • 0.015 in(1)
      • 0.016 in(50)
      • 0.017 in(2)
      • 0.019 in(8)
      • 0.02 in(6)
      • 0.021 in(2)
      • 0.023 in(8)
      • 0.024 in(2)
      • 0.03 in(1)
      • 0.031 in(57)
      • 0.035 in(8)
      • 0.039 in(7)
      • 0.047 in(57)
      • 0.049 in(6)
      • 0.06 in(7)
      • 0.062 in(14)
      • 0.063 in(46)
      • 0.069 in(6)
      • 0.078 in(6)
      • 0.079 in(8)
      • 0.089 in(8)
      • 0.094 in(4)
      • 0.095 in(19)
      • 0.098 in(2)
      • 0.125 in(2)
      • 0.126 in(2)
      • 0.25 in(2)
      Corner Radius MinaCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.0 mm(2)
      • 0.025 mm(4)
      • 0.05 mm(16)
      • 0.076 mm(10)
      • 0.1 mm(43)
      • 0.125 mm(7)
      • 0.151 mm(9)
      • 0.176 mm(9)
      • 0.2 mm(41)
      • 0.225 mm(7)
      • 0.25 mm(9)
      • 0.275 mm(8)
      • 0.301 mm(7)
      • 0.325 mm(9)
      • 0.351 mm(17)
      • 0.375 mm(1)
      • 0.4 mm(50)
      • 0.426 mm(2)
      • 0.45 mm(8)
      • 0.476 mm(3)
      • 0.5 mm(6)
      • 0.525 mm(2)
      • 0.576 mm(8)
      • 0.601 mm(2)
      • 0.75 mm(1)
      • 0.775 mm(6)
      • 0.8 mm(51)
      • 0.9 mm(8)
      • 1.0 mm(7)
      • 1.201 mm(57)
      • 1.25 mm(6)
      • 1.5 mm(6)
      • 1.526 mm(1)
      • 1.576 mm(14)
      • 1.6 mm(46)
      • 1.75 mm(6)
      • 1.975 mm(6)
      • 2.0 mm(8)
      • 2.25 mm(8)
      • 2.375 mm(4)
      • 2.401 mm(19)
      • 2.5 mm(2)
      • 3.176 mm(2)
      • 3.2 mm(2)
      • 6.351 mm(2)
      Corner Radius MinaCorner Radius Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • 13E (31)
      • 241 (8)
      • CL4 (24)
      • CM2 (26)
      • CM3 (24)
      • CM4 (12)
      • CPX (28)
      • CW2 (17)
      • CW2015 (31)
      • CW5025 (35)
      • GH1 (2)
      • GX (15)
      • HCK10 (4)
      • HK1500 (36)
      • HK35 (2)
      • HT2 (27)
      • HTX (16)
      • HWK15 (4)
      • K00326 (4)
      • K00331 (1)
      • K060 (12)
      • K090 (35)
      • K1 (13)
      • K1010P (2)
      • K10M (41)
      • K10P (35)
      • K10U (34)
      • K15U (34)
      • K20K (41)
      • K21 (15)
      • K25M (36)
      • K25P (37)
      • K2885 (6)
      • K313 (59)
      • K35P (17)
      • K420 (34)
      • K45 (15)
      • K4H (6)
      • K68 (56)
      • K8735 (4)
      • KB1340 (12)
      • KB1345 (22)
      • KB1610 (25)
      • KB1625 (21)
      • KB1630 (23)
      • KB5610 (23)
      • KB5625 (29)
      • KB5630 (21)
      • KB9610 (34)
      • KB9640 (16)
      • KBH10 (34)
      • KBH10B (22)
      • KBH20 (37)
      • KBH20B (22)
      • KBK35 (8)
      • KC210 (26)
      • KC250 (29)
      • KC5010 (64)
      • KC5020P (6)
      • KC5025 (63)
      • KC5410 (53)
      • KC5510 (39)
      • KC5525 (25)
      • KC710 (20)
      • KC720 (42)
      • KC722 (17)
      • KC730 (51)
      • KC7310 (43)
      • KC732 (37)
      • KC8050 (53)
      • KC810 (59)
      • KC850 (59)
      • KC9010 (43)
      • KC9025 (53)
      • KC910 (55)
      • KC9105 (51)
      • KC9110 (61)
      • KC9120 (53)
      • KC9125 (53)
      • KC9125RR (2)
      • KC9140 (41)
      • KC9145 (37)
      • KC9210 (9)
      • KC9215 (39)
      • KC9225 (51)
      • KC9240 (47)
      • KC9240NEW (47)
      • KC9245 (39)
      • KC9315 (53)
      • KC9320 (57)
      • KC9325 (45)
      • KC935 (61)
      • KC950 (57)
      • KC990 (45)
      • KCD25 (14)
      • KCK05 (53)
      • KCK05B (43)
      • KCK15 (49)
      • KCK15B (53)
      • KCK20 (57)
      • KCK20B (57)
      • KCM15 (47)
      • KCM15B (51)
      • KCM25 (51)
      • KCM25B (47)
      • KCM25S (4)
      • KCM35 (45)
      • KCM35B (36)
      • KCP05 (44)
      • KCP05B (36)
      • KCP10 (53)
      • KCP10B (61)
      • KCP15 (4)
      • KCP20S (4)
      • KCP25 (53)
      • KCP25B (61)
      • KCP25C (61)
      • KCP30 (49)
      • KCP30B (36)
      • KCP40 (32)
      • KCP40B (43)
      • KCPK05 (37)
      • KCS10 (16)
      • KCS10B (49)
      • KCS25S (4)
      • KCU10 (61)
      • KCU10B (61)
      • KCU25 (59)
      • KCU25B (59)
      • KD050 (28)
      • KD081 (31)
      • KD100 (27)
      • KD120 (27)
      • KD1400 (23)
      • KD1405 (17)
      • KD1425 (33)
      • KM1 (10)
      • KMF (8)
      • KN10S (4)
      • KS15 (12)
      • KT1120 (7)
      • KT125 (30)
      • KT150 (19)
      • KT175 (38)
      • KT315 (50)
      • KT325 (27)
      • KT5020 (3)
      • KTP10 (38)
      • KTP25S (32)
      • KU10 (8)
      • KU10T (46)
      • KU25T (9)
      • KU30T (57)
      • KY1310 (18)
      • KY1320 (35)
      • KY1540 (17)
      • KY1615 (33)
      • KY2000 (19)
      • KY2100 (12)
      • KY3000 (41)
      • KY3400 (23)
      • KY3500 (35)
      • KY4000 (15)
      • KY4300 (17)
      • KY4400 (35)
      • KYHK15B (35)
      • KYK10 (14)
      • KYK25 (23)
      • KYK35 (35)
      • KYS25 (17)
      • KYS30 (19)
      • NL200 (17)
      • NL250 (37)
      • NL300 (28)
      • NL400 (17)
      • NL920 (27)
      • P25 (10)
      • PB100 (10)
      • PB170 (8)
      • PB250 (10)
      • PB300 (8)
      • PD100 (4)
      • PD50 (2)
      • PN120 (1)
      • PS5 (19)
      • SP0819 (28)
      • SP0A00 (2)
      • SP3019 (19)
      • SP4019 (23)
      • SP4036 (3)
      • SP4093 (3)
      • SP61EJ (2)
      • SPADAP (5)
      • SPN3W1 (2)
      • SPSREJ (2)
      • THM (29)
      • THM-X (23)
      • THMF-X (10)
      • TN10P (51)
      • TN10U (34)
      • TN15M (43)
      • TN15U (34)
      • TN2000 (36)
      • TN20K (47)
      • TN20P (49)
      • TN30M (45)
      • TN30P (32)
      • TN4000 (34)
      • TN5015 (38)
      • TN5020 (38)
      • TN5105 (29)
      • TN5120 (40)
      • TN6010 (34)
      • TN6025 (37)
      • TN7005 (31)
      • TN7010 (42)
      • TN7015 (42)
      • TN7025 (42)
      • TN7035 (38)
      • TN7105 (31)
      • TN7110 (48)
      • TN7115 (40)
      • TN7125 (40)
      • TN7135 (38)
      • TN8025 (38)
      • TTI15 (27)
      • TTM (2)
      • TTM09 (2)
      • TTR (14)
      • TTS (27)
      • TTX (25)
      • W00342 (2)
      • WBH10C (34)
      • WBH10P (21)
      • WBH10U (25)
      • WBH20P (30)
      • WBH25P (23)
      • WBH25U (27)
      • WBH30P (21)
      • WBK40U (12)
      • WBK45U (23)
      • WDN00U (12)
      • WDN25U (23)
      • WK05CT (45)
      • WK15CT (33)
      • WK20CT (49)
      • WM15CT (47)
      • WM25CT (47)
      • WM35CT (39)
      • WP05CT (10)
      • WP15CT (49)
      • WP20TT (4)
      • WP25CT (49)
      • WP35CT (49)
      • WS10PT (41)
      • WS25PT (43)
      • WU05PT (4)
      • WU10HT (50)
      • WU10PT (38)
      • WU25PT (39)
      • X00511 (8)
      • X00580 (8)
      • X00581 (8)
      • X00582 (8)
      • X00583 (8)
      • X00584 (8)
      • X00585 (8)
      • X00586 (8)
      • X00591 (8)
      • X00592 (8)
      • X00593 (8)
      • X00594 (8)
      • X00596 (8)
      • X00597 (8)
      • X00599 (8)
      Hand Of Tool
      Hand Of Tool
      • L (8)
      • N (2)
      • R (11)
      Wiper Insert
      Wiper Insert
      • N (65)
      • Y (27)
      F Dimension
      F Dimension
      • 0.0 mm(2)
      • 27.0 mm(4)
      • 35.0 mm(15)
      F Dimension MinaF Dimension Max
      F Dimension
      F Dimension
      • 0.0 in(2)
      • 1.063 in(4)
      • 1.379 in(15)
      F Dimension MinaF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(3)
      • 41.301 mm(2)
      • 47.6 mm(2)
      • 57.2 mm(1)
      • 62.0 mm(3)
      • 64.0 mm(2)
      • 65.0 mm(6)
      • 65.5 mm(1)
      • 66.0 mm(1)
      • 80.0 mm(2)
      • 88.9 mm(2)
      • 110.0 mm(27)
      • 125.0 mm(7)
      • 139.701 mm(2)
      • 165.0 mm(1)
      • 174.601 mm(2)
      • 209.601 mm(1)
      • 222.3 mm(1)
      • 223.0 mm(2)
      Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(3)
      • 1.627 in(2)
      • 1.874 in(2)
      • 2.253 in(1)
      • 2.441 in(3)
      • 2.52 in(2)
      • 2.559 in(6)
      • 2.579 in(1)
      • 2.598 in(1)
      • 3.15 in(2)
      • 3.5 in(2)
      • 4.331 in(27)
      • 4.921 in(7)
      • 5.5 in(2)
      • 6.496 in(1)
      • 6.875 in(2)
      • 8.252 in(1)
      • 8.752 in(1)
      • 8.78 in(2)
      Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(8)
      Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(8)
      Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • B (2)
      • E (7)
      • S (12)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (9)
      • NEGATIVE-ZERO (1)
      • NEUTRAL (ZERO) (8)
      Maximum Bore Depth
      Maximum Bore Depth
      • 1.969 in(1)
      • 2.047 in(8)
      • 2.362 in(34)
      • 2.441 in(2)
      • 2.559 in(2)
      Maximum Bore Depth MinaMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 50.0 mm(1)
      • 52.0 mm(8)
      • 60.0 mm(34)
      • 62.0 mm(2)
      • 65.0 mm(2)
      Maximum Bore Depth MinaMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (8)
      frontEnd
      Adapter Front-End
      Adapter Front-End
      • CARTRIDGE MOUNT (6)
      Clamp Style
      Clamp Style
      • D (34)
      • N (12)
      • P (7)
      • S (12)
      Cutting Width
      Cutting Width
      • 0.039 in(6)
      • 0.047 in(6)
      • 0.06 in(6)
      • 0.062 in(6)
      • 0.069 in(6)
      • 0.073 in(6)
      • 0.078 in(6)
      • 0.079 in(6)
      • 0.088 in(6)
      • 0.089 in(3)
      • 0.094 in(3)
      • 0.095 in(6)
      • 0.097 in(6)
      • 0.098 in(6)
      • 0.105 in(6)
      • 0.108 in(6)
      • 0.11 in(6)
      • 0.119 in(8)
      • 0.122 in(6)
      • 0.125 in(8)
      • 0.126 in(8)
      • 0.128 in(6)
      • 0.131 in(3)
      • 0.138 in(8)
      • 0.143 in(6)
      • 0.156 in(6)
      • 0.157 in(8)
      • 0.167 in(8)
      • 0.169 in(6)
      • 0.177 in(8)
      • 0.178 in(6)
      • 0.185 in(8)
      • 0.188 in(8)
      • 0.189 in(8)
      • 0.192 in(3)
      • 0.193 in(3)
      • 0.195 in(6)
      • 0.196 in(6)
      • 0.197 in(2)
      • 0.202 in(2)
      • 0.213 in(2)
      • 0.217 in(2)
      • 0.219 in(2)
      • 0.237 in(2)
      • 0.25 in(2)
      • 0.256 in(2)
      Cutting Width MinaCutting Width Max
      Cutting Width
      Cutting Width
      • 1.0 mm(6)
      • 1.201 mm(6)
      • 1.5 mm(6)
      • 1.576 mm(6)
      • 1.75 mm(6)
      • 1.826 mm(6)
      • 1.975 mm(6)
      • 2.0 mm(6)
      • 2.2 mm(6)
      • 2.225 mm(6)
      • 2.25 mm(3)
      • 2.375 mm(3)
      • 2.401 mm(6)
      • 2.475 mm(6)
      • 2.5 mm(6)
      • 2.676 mm(6)
      • 2.75 mm(6)
      • 2.801 mm(6)
      • 3.0 mm(8)
      • 3.1 mm(6)
      • 3.176 mm(8)
      • 3.2 mm(8)
      • 3.25 mm(6)
      • 3.325 mm(3)
      • 3.5 mm(8)
      • 3.6 mm(6)
      • 3.95 mm(6)
      • 3.975 mm(3)
      • 4.0 mm(8)
      • 4.25 mm(8)
      • 4.3 mm(6)
      • 4.5 mm(8)
      • 4.525 mm(6)
      • 4.7 mm(8)
      • 4.775 mm(8)
      • 4.801 mm(8)
      • 4.875 mm(3)
      • 4.9 mm(3)
      • 4.95 mm(6)
      • 4.976 mm(6)
      • 5.0 mm(2)
      • 5.125 mm(2)
      • 5.4 mm(2)
      • 5.5 mm(2)
      • 5.575 mm(2)
      • 6.0 mm(2)
      • 6.351 mm(2)
      • 6.5 mm(2)
      Cutting Width MinaCutting Width Max
      Front End Type
      Front End Type
      • MCS - Modular Cartridge System (6)
      Insert Shape
      Insert Shape
      • C-DIAMOND/RHOMBIC 80 (17)
      • D-DIAMOND/RHOMBIC 55 (15)
      • LT-TRIANGLE LAY DOWN THREAD 60 (4)
      • R-ROUND (2)
      • S-SQUARE 90 (4)
      • TN-TOP NOTCH (8)
      • V-DIAMOND/RHOMBIC 35 (11)
      • W-TRIGON 80 (4)
      Front End Style
      Front End Style
      • MCS01 Modular Deep Grooving (6)
      Insert Size
      Insert Size
      • 3 (6)
      • 4 (2)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.21 in(4)
      • 0.294 in(2)
      Maximum Cutting Depth MinaMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 5.325 mm(4)
      • 7.476 mm(2)
      Maximum Cutting Depth MinaMaximum Cutting Depth Max
      Gage Length
      Gage Length
      • 1.929 in(2)
      • 2.185 in(2)
      • 2.5 in(2)
      Gage Length
      Gage Length
      • 49 mm(2)
      • 55.5 mm(2)
      • 63.5 mm(2)
      insertGeometry
      Cutting Tool Material
      Cutting Tool Material
      • B H (50)
      • B L (44)
      • C A (37)
      • C N (47)
      • D P (42)
      • H T (50)
      • H W (65)
      backEnd
      Connection Type
      Connection Type
      • TAPER SHANK (21)
      System Size
      System Size
      • PSC50 (16)
      No filters matching ""
      Fixação-D
      (34)

      Fixação-D

      Fixação-P
      (7)

      Fixação-P

      Fixação-S
      (8)

      Fixação-S

      Perfilagem Top Thread™
      (4)

      Perfilagem Top Thread™

      Top Thread™ e Top Groove™
      (8)

      Top Thread™ e Top Groove™

      Canal e corte WGC
      (6)

      Canal e corte WGC

      Rosqueamento de assentamento
      (4)

      Rosqueamento de assentamento

      Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
      Select the destination where you want to move a.
      Novo Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Digite um nome válido
      product-image
      Please adjust the following properties from

      Código de catálogo ISO

      Número do catálogo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Você deve ser registrado para ver as informações do seu painel
      Session expired due to inactivity, please login again
      Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
      itens adicionados com sucesso ao carrinho
      Ver o carrinho

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number Código de catálogo ISO Classe  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk