Filtry
Filtry
Wyświetl filtry w
MetryczneCalowe
Workpiece Material
Workpiece Material
- P Steel (22)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
- M Stainless Steel (22)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
- K Cast Iron (22)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(22)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(22)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(22)
- N Non-Ferrous Materials (22)
- N1Wrought Aluminum (22)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
- N3High-Silicon Aluminum Alloys Si >12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (22)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (22)
- N6Carbon, Graphite Composites, CFRP (22)
- N7MMC's (22)
- S High-Temp Alloys (22)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(22)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(22)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(22)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
- H Hardened Materials (22)
- H1Hardened Materials 44-48 HRC(22)
- H2Hardened Materials 48-55 HRC(22)
- H3Hardened Materials 56-60 HRC(22)
- H4Hardened Materials >60 HRC(22)
- C CFRP Materials (22)
- C1CFRP, CFRP / CFRP (22)
- C2CFRP / Aluminium CFRP / Non-Ferrous (22)
Applications
Applications
Chamfer Turning (1)
Facing (11)
Multiple Direction Cutting (19)
Plunge Turning (1)
Profiling (17)
TRN Boring (4)
Turning (22)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (22)
- Lightly Interrupted Cut (22)
- Smooth Cut (22)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 62.5 (2)
- 90.0 (1)
- 93.0 (10)
- 95.0 (4)
- 107.5 (4)
do
Connection Style
Connection Style
- KM (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (21)
- 2.0 (17)
- 3.0 (4)
- 4.0 (18)
- 6.0 (4)
- 8.0 (3)
do
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.379 in(17)
- 1.575 in(5)
do
Over All Length [L]
Over All Length [L]
- 35.0 mm(17)
- 40.0 mm(5)
do
Corner Radius
Corner Radius
- 0.004 in(19)
- 0.008 in(15)
- 0.014 in(6)
- 0.016 in(22)
- 0.024 in(2)
- 0.031 in(22)
- 0.047 in(22)
- 0.063 in(16)
do
Corner Radius
Corner Radius
- 0.1 mm(19)
- 0.2 mm(15)
- 0.351 mm(6)
- 0.4 mm(22)
- 0.601 mm(2)
- 0.8 mm(22)
- 1.201 mm(22)
- 1.6 mm(16)
do
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (20)
- CW5025 (12)
- K060 (2)
- K090 (1)
- K313 (22)
- K68 (20)
- KB1340 (3)
- KB1345 (7)
- KB1610 (16)
- KB1630 (13)
- KB5610 (11)
- KB5630 (11)
- KBH10 (22)
- KBH10B (19)
- KBH20 (22)
- KBH20B (19)
- KBK35 (2)
- KC5010 (22)
- KC5025 (22)
- KC5410 (21)
- KC730 (16)
- KC850 (22)
- KC9125 (2)
- KCK05 (22)
- KCK05B (7)
- KCK15 (22)
- KCK15B (22)
- KCK20 (22)
- KCK20B (22)
- KCM15 (22)
- KCM15B (22)
- KCM25 (22)
- KCM25B (22)
- KCM35 (22)
- KCM35B (13)
- KCP05 (22)
- KCP05B (22)
- KCP10 (22)
- KCP10B (22)
- KCP25 (22)
- KCP25B (22)
- KCP25C (22)
- KCP30 (22)
- KCP30B (10)
- KCP40 (16)
- KCP40B (22)
- KCPK05 (22)
- KCS10 (2)
- KCS10B (22)
- KCU10 (22)
- KCU10B (22)
- KCU25 (22)
- KCU25B (22)
- KD1400 (13)
- KD1405 (11)
- KD1425 (15)
- KS15 (2)
- KT315 (22)
- KT325 (2)
- KTP10 (22)
- KTP25S (21)
- KY1540 (2)
- KY1615 (3)
- KY3500 (22)
- KY4300 (5)
- KY4400 (22)
- KYHK15B (22)
- KYK10 (8)
- KYK25 (8)
- KYS25 (3)
- KYS30 (8)
- PB100 (2)
- THM (5)
- THM-X (9)
- THMF-X (5)
- TN10P (22)
- TN10U (21)
- TN15M (15)
- TN15U (14)
- TN2000 (13)
- TN20K (22)
- TN20P (22)
- TN30M (15)
- TN30P (13)
- TN4000 (13)
- TN6010 (8)
- TTS (3)
- WBH10P (11)
- WBH10U (2)
- WBH20P (22)
- WBH30P (11)
- WBK40U (1)
- WBK45U (3)
- WDN00U (5)
- WDN25U (15)
- WK05CT (22)
- WK15CT (13)
- WK20CT (22)
- WM15CT (22)
- WM25CT (22)
- WM35CT (19)
- WP05CT (4)
- WP15CT (22)
- WP25CT (22)
- WP35CT (22)
- WS10PT (22)
- WS25PT (22)
- WU10HT (22)
- WU10PT (19)
- WU25PT (19)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
Hand Of Tool
Hand Of Tool
- L (8)
- N (3)
- R (7)
Wiper Insert
Wiper Insert
- N (22)
- Y (10)
F Dimension
F Dimension
- 0.0 mm(3)
- 22.0 mm(15)
do
F Dimension
F Dimension
- 0.0 in(3)
- 0.866 in(15)
do
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 44.0 mm(2)
- 54.0 mm(2)
do
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.732 in(2)
- 2.126 in(2)
do
Cutting Direction
Cutting Direction
- B (4)
- E (3)
- S (11)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (15)
- NEGATIVE-ZERO (3)
Maximum Bore Depth
Maximum Bore Depth
- 1.379 in(4)
do
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(4)
do
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- D-DIAMOND/RHOMBIC 55 (9)
- S-SQUARE 90 (1)
- T-TRIANGLE 60 (2)
- V-DIAMOND/RHOMBIC 35 (6)
- W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (16)
- B L (22)
- C A (22)
- C N (22)
- D P (21)
- H T (22)
- H W (22)
backEnd
Connection Type
Connection Type
- TAPER SHANK (18)
System Size
System Size
- KM32 (12)
- KM32TS (6)
No filters matching ""
