Downloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 5538600 |
| Nr katalogowy ISO | TCF080308DPV34 |
| Nr katalogowy ANSI | TCF080308DPV34 |
| Grade | WPK10CH |
| [D] Insert IC Size | 8.08 mm |
| [D] Insert IC Size | 0.318 in |
| [D1] Insert Hole Size | 2.8 mm |
| [D1] Insert Hole Size | 0.11 in |
| [W] Cutting Width | 8.6 mm |
| [W] Cutting Width | 0.339 in |
| [S] Insert Thickness | 3 mm |
| [S] Insert Thickness | 0.118 in |
| [RR] Corner Radius | 0.8 mm |
| [RR] Corner Radius | 0.031 in |
| Insert Size | D |
Gatunki
WPK10CH
Composition: With an advanced CVD TiCN-Al2O3 coating combined with a cobalt-enriched carbide substrate, this grade offers a balanced combination of deformation resistance and edge toughness.
Application: Offers outstanding abrasion and crater wear resistance for high-speed machining of steels and cast irons. Use for very high cutting speeds with low to medium feed rates.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Grupa materiałowa | Geometria | Obróbka lekka | Obróbka średnia | Obróbka ciężka | |||
| płytka peryferyjna | płytka centralna | płytka peryferyjna | płytka centralna | płytka peryferyjna | płytka centralna | ||
| P1 | V38/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P2–P4 | V34/DU | WPK10CH | WU40PH/WU20PH | WU25CH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P5–P6 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| M1–M3 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| K1–K3 | V34/DU | WPK10CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| N1–N4 | V36 | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH |
| S1–S4 | V38/DU | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | |||||||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| –V38 | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/obr. | – | – | 0,07–0,10 | 0,08–0,10 | |
| –V38 | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/obr. | – | – | 0,07–0,11 | 0,08–0,11 | |
| –V34 | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | – | – | 0,07–0,12 | 0,08–0,13 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/obr. | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/obr. | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/obr. | – | – | 0,06–0,09 | 0,07–0,10 | |
| –V38 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | |||||||
| –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/obr. | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/obr. | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/obr. | – | – | 0,07–0,13 | 0,09–0,18 | |
| –V34 | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/obr. | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/obr. | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/obr. | – | – | 0,07–0,11 | 0,09–0,14 | |
| –V38 | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | |||||||
| –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/obr. | – | – | 0,07–0,11 | 0,09–0,14 | |
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | |||||||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| –V38 | 0,13–0,16 | 0,15–0,18 | 0,16–0,23 | 0,17–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/obr. | 0,09–0,12 | 0,11–0,13 | – | – | |
| –V38 | 0,13–0,17 | 0,15–0,19 | 0,16–0,24 | 0,17–0,25 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/obr. | 0,09–0,13 | 0,11–0,14 | – | – | |
| –V34 | 0,13–0,20 | 0,15–0,21 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | 0,09–0,15 | 0,11–0,15 | – | – | |
| –V34 | 0,16–0,24 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 250 | mm/obr. | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V34 | 0,14–0,22 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 250 | mm/obr. | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/obr. | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,29 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 160 | mm/obr. | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 190 | mm/obr. | 0,09–0,13 | 0,10–0,15 | – | – | |
| –V38 | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 110 | 160 | mm/obr. | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 90 | 160 | mm/obr. | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/obr. | 0,10–0,19 | 0,12–0,22 | – | – | |
| –V34 | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/obr. | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 130 | 190 | mm/obr. | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | ||||||||
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 25 | 40 | mm/obr. | 0,10–0,15 | 0,12–0,18 | – | – | |
| –V38 | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | |||||||
| –DU | WU20PH | WU20PH | 30 | 35 | 50 | mm/obr. | 0,10–0,15 | 0,12–0,18 | – | – | |
| Avanzamento al giro consigliato | |||||||||||
| Gatunek | Prędkość skrawania | ||||||||||
| Grupa materiałowa | Geometria | Centralna | Peryferyjna | Min. | Początek | Maks. | Średnica | 12,00 | 14,00 | 19,00 | 24,00 |
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| P0 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.10 | 0.08–0.10 |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| P1 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.11 | 0.08–0.11 |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| P2 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.12 | 0.08–0.13 |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P3 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P4 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P5 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P6 | –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M1 | –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M2 | –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M3 | –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K1 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K2 | –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K3 | –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| S3 | –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| S4 | –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| rozmiar płytki | Zakres średnic mm (cale) | 2 x D/3 x D | 4 x D | 5 x D | ||||||
| Wartość maks. przesunięcia X w mm (maks. w calach) | Wartość maks. D1 mm (cale) | Tolerancja otworów mm (cale) | Wartość maks. przesunięcia X w mm (maks. w calach) | Wartość maks. D1 mm (cale) | Tolerancja otworów mm (cale) | Wartość maks. przesunięcia X w mm (maks. w calach) | Wartość maks. D1 mm (cale) | Tolerancja otworów mm (cale) | ||
| A | 12,00 | 0,5 | D1 + 1 mm | +/- 0,20 | 0,5 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | 0,5 | D1 + 1 mm | +/- 0,20 | 0,5 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | 0,5 | D1 + 1 mm | +/- 0,20 | 0,5 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | 0,8 | D1 + 1,6 mm | +/- 0,20 | 0,8 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | 0,8 | D1 + 1,6 mm | +/- 0,20 | 0,8 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | 0,8 | D1 + 1,6 mm | +/- 0,25 | 0,8 | D1 + 1 mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | 1 | D1 + 2 mm | +/- 0,25 | 0,8 | D1 + 1 mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | 1 | D1 + 2 mm | +/- 0,28 | 0,8 | D1 + 1 mm | +/- 0,42 | +/- 0,42 | ||
| rozmiar płytki | Zakres średnic (mm) | 2 x D i 3 x D | 4 x D | 5 x D | |||
| Wartość przesunięcia X: | D1 maks. | Wartość przesunięcia X: | D1 maks. | Przesunięcie x | D1 maks. | ||
| A | 12,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| B | 14,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| C | 19,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| G | 46,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| H | 57,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| rozmiar płytki | Zakres średnic mm (cale) | 2 x D/3 x D | 4 x D | 5 x D | |||||
| Wartość maks. D1 mm (cale) | Klasa dokładności mm (cale) | Wartość maks. przesunięcia X wmm (maks. w calach) | Wartość maks. D1 mm (cale) | Klasa dokładności mm (cale) | Wartość maks. przesunięcia X wmm (maks. w calach) | Wartość maks. D1 mm (cale) | Klasa dokładności mm (cale) | ||
| A | 12,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | 1,188 | 1,469 | 1,813 | 2,250 | |||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | Cali/obrót | 0,0053 | 0,0063 | 0,0071 | 0,0075 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0075 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| Zalecany posuw na obrót | |||||||||||
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | 0,473 | 0,563 | 0,750 | 0,969 | |||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | Cali/obrót | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | Cali/obrót | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| Recommended Feed Rate per Revolution | |||||||||||
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | .473 | .563 | .750 | .969 | |||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?