Downloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 5542625 |
| Nr katalogowy ISO | TCF150406FCV36 |
| Nr katalogowy ANSI | TCF150406FCV36 |
| Grade | WU25CH |
| [D] Insert IC Size | 14.942 mm |
| [D] Insert IC Size | 0.588 in |
| [D1] Insert Hole Size | 4.8 mm |
| [D1] Insert Hole Size | 0.189 in |
| [W] Cutting Width | 12.2 mm |
| [W] Cutting Width | 0.48 in |
| [S] Insert Thickness | 4.2 mm |
| [S] Insert Thickness | 0.165 in |
| [RR] Corner Radius | 0.6 mm |
| [RR] Corner Radius | 0.023 in |
| Insert Size | F |
Gatunki
WU25CH
Composition: Advanced CVD TiCN-Al2O3 coating together with a newly engineered, tough carbide substrate. Ensures adequate deformation resistance and excellent edge strength and offers very good wear resistance over a wide range of
machining conditions.
Application: high-productivity grade with high speeds and feeds. First choice
for high productivity with excellent reliability in steels, stainless steels, and cast irons.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Grupa materiałowa | Geometria | Obróbka lekka | Obróbka średnia | Obróbka ciężka | |||
| płytka peryferyjna | płytka centralna | płytka peryferyjna | płytka centralna | płytka peryferyjna | płytka centralna | ||
| P1 | V38/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P2–P4 | V34/DU | WPK10CH | WU40PH/WU20PH | WU25CH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P5–P6 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| M1–M3 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| K1–K3 | V34/DU | WPK10CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| N1–N4 | V36 | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH |
| S1–S4 | V38/DU | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | |||||||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| –V38 | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/obr. | – | – | 0,07–0,10 | 0,08–0,10 | |
| –V38 | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/obr. | – | – | 0,07–0,11 | 0,08–0,11 | |
| –V34 | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | – | – | 0,07–0,12 | 0,08–0,13 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/obr. | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/obr. | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/obr. | – | – | 0,06–0,09 | 0,07–0,10 | |
| –V38 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | |||||||
| –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/obr. | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/obr. | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/obr. | – | – | 0,07–0,13 | 0,09–0,18 | |
| –V34 | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/obr. | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/obr. | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/obr. | – | – | 0,07–0,11 | 0,09–0,14 | |
| –V38 | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | |||||||
| –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/obr. | – | – | 0,07–0,11 | 0,09–0,14 | |
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | |||||||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| –V38 | 0,13–0,16 | 0,15–0,18 | 0,16–0,23 | 0,17–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/obr. | 0,09–0,12 | 0,11–0,13 | – | – | |
| –V38 | 0,13–0,17 | 0,15–0,19 | 0,16–0,24 | 0,17–0,25 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/obr. | 0,09–0,13 | 0,11–0,14 | – | – | |
| –V34 | 0,13–0,20 | 0,15–0,21 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/obr. | 0,09–0,15 | 0,11–0,15 | – | – | |
| –V34 | 0,16–0,24 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 250 | mm/obr. | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V34 | 0,14–0,22 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 250 | mm/obr. | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/obr. | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,29 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 160 | mm/obr. | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 190 | mm/obr. | 0,09–0,13 | 0,10–0,15 | – | – | |
| –V38 | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 110 | 160 | mm/obr. | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 90 | 160 | mm/obr. | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/obr. | 0,10–0,19 | 0,12–0,22 | – | – | |
| –V34 | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/obr. | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 130 | 190 | mm/obr. | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | ||||||||
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 25 | 40 | mm/obr. | 0,10–0,15 | 0,12–0,18 | – | – | |
| –V38 | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | |||||||
| –DU | WU20PH | WU20PH | 30 | 35 | 50 | mm/obr. | 0,10–0,15 | 0,12–0,18 | – | – | |
| Avanzamento al giro consigliato | |||||||||||
| Gatunek | Prędkość skrawania | ||||||||||
| Grupa materiałowa | Geometria | Centralna | Peryferyjna | Min. | Początek | Maks. | Średnica | 12,00 | 14,00 | 19,00 | 24,00 |
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| P0 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.10 | 0.08–0.10 |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| P1 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.11 | 0.08–0.11 |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| P2 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.12 | 0.08–0.13 |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P3 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P4 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P5 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P6 | –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M1 | –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M2 | –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M3 | –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K1 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K2 | –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K3 | –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| S3 | –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| S4 | –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| rozmiar płytki | Zakres średnic mm (cale) | 2 x D/3 x D | 4 x D | 5 x D | ||||||
| Wartość maks. przesunięcia X w mm (maks. w calach) | Wartość maks. D1 mm (cale) | Tolerancja otworów mm (cale) | Wartość maks. przesunięcia X w mm (maks. w calach) | Wartość maks. D1 mm (cale) | Tolerancja otworów mm (cale) | Wartość maks. przesunięcia X w mm (maks. w calach) | Wartość maks. D1 mm (cale) | Tolerancja otworów mm (cale) | ||
| A | 12,00 | 0,5 | D1 + 1 mm | +/- 0,20 | 0,5 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | 0,5 | D1 + 1 mm | +/- 0,20 | 0,5 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | 0,5 | D1 + 1 mm | +/- 0,20 | 0,5 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | 0,8 | D1 + 1,6 mm | +/- 0,20 | 0,8 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | 0,8 | D1 + 1,6 mm | +/- 0,20 | 0,8 | D1 + 1 mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | 0,8 | D1 + 1,6 mm | +/- 0,25 | 0,8 | D1 + 1 mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | 1 | D1 + 2 mm | +/- 0,25 | 0,8 | D1 + 1 mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | 1 | D1 + 2 mm | +/- 0,28 | 0,8 | D1 + 1 mm | +/- 0,42 | +/- 0,42 | ||
| rozmiar płytki | Zakres średnic (mm) | 2 x D i 3 x D | 4 x D | 5 x D | |||
| Wartość przesunięcia X: | D1 maks. | Wartość przesunięcia X: | D1 maks. | Przesunięcie x | D1 maks. | ||
| A | 12,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| B | 14,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| C | 19,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| G | 46,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| H | 57,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| rozmiar płytki | Zakres średnic mm (cale) | 2 x D/3 x D | 4 x D | 5 x D | |||||
| Wartość maks. D1 mm (cale) | Klasa dokładności mm (cale) | Wartość maks. przesunięcia X wmm (maks. w calach) | Wartość maks. D1 mm (cale) | Klasa dokładności mm (cale) | Wartość maks. przesunięcia X wmm (maks. w calach) | Wartość maks. D1 mm (cale) | Klasa dokładności mm (cale) | ||
| A | 12,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Zalecany posuw na obrót | |||||||||||
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | 0,473 | 0,563 | 0,750 | 0,969 | |||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | Cali/obrót | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | Cali/obrót | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | Cali/obrót | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | Cali/obrót | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | Cali/obrót | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | 1,188 | 1,469 | 1,813 | 2,250 | |||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | Cali/obrót | 0,0053 | 0,0063 | 0,0071 | 0,0075 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0075 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | Cali/obrót | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | Cali/obrót | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | Cali/obrót | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| Recommended Feed Rate per Revolution | |||||||||||
| Grupa materiałowa | Geometria | Gatunek | Prędkość skrawania | Średnica | .473 | .563 | .750 | .969 | |||
| Centralna | Peryferyjna | Min. | Początek | Maks. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
