Welcome
Please confirm your preferences
Update Preferences

Product Suggestions

Product Family suggestions

Contact a WIDIA Expert

Customer Support

Find customer support centers around the globe.

Quick Order
Item(s) successfully added to cart
View Cart

WMT Integral Toolholders

Select Filters
Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (201)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(201)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(201)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(201)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(201)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(201)
    • M Stainless Steel (201)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(201)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(201)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(201)
    • K Cast Iron (201)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(201)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(201)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(201)
    • N Non-Ferrous Materials (201)
      • N1
        Wrought Aluminum (201)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(201)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(201)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (201)
      • N6
        Carbon, Graphite Composites, CFRP (201)
    • S High-Temp Alloys (201)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(201)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(201)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(201)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(201)
    • H Hardened Materials (183)
      • H1
        Hardened Materials 44-48 HRC(183)
      • H2
        Hardened Materials 48-55 HRC(183)
    Select All Star
    • CN (40)
    • DE (73)
    • IN (28)
    • SG (10)
    • US (39)
    Applications
    Applications
    • Cut-OffCut-Off (110)
    • Face GroovingFace Grooving (25)
    • GroovingGrooving (168)
    • ID GroovingID Grooving (30)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (201)
    • Lightly Interrupted Cut (201)
    • Smooth Cut (183)
    • Varying Depth of Cut (183)
    Connection Style
    Connection Style
    • Boring Bar Shank (30)
    • Toolholder (177)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (202)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.938 in(13)
    • 4.5 in(13)
    • 4.921 in(34)
    • 5.0 in(31)
    • 5.5 in(2)
    • 5.513 in(2)
    • 5.906 in(53)
    • 6.0 in(29)
    • 7.875 in(4)
    • 8.0 in(4)
    • 9.843 in(8)
    • 10.0 in(7)
    • 11.811 in(3)
    • 11.817 in(1)
    • 12.0 in(3)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 100.0 mm(13)
    • 114.301 mm(13)
    • 125.0 mm(34)
    • 127.0 mm(31)
    • 139.701 mm(2)
    • 140.0 mm(2)
    • 150.0 mm(53)
    • 152.4 mm(29)
    • 200.0 mm(4)
    • 203.201 mm(4)
    • 250.0 mm(8)
    • 254.0 mm(7)
    • 300.0 mm(3)
    • 300.151 mm(1)
    • 304.8 mm(3)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.003 in(54)
    • 0.005 in(17)
    • 0.006 in(52)
    • 0.007 in(68)
    • 0.01 in(108)
    • 0.012 in(131)
    • 0.015 in(17)
    • 0.023 in(23)
    • 0.024 in(131)
    • 0.03 in(131)
    • 0.06 in(57)
    • 0.079 in(23)
    • 0.08 in(23)
    • 0.095 in(28)
    • 0.098 in(28)
    • 0.099 in(28)
    • 0.119 in(23)
    • 0.12 in(23)
    • 0.125 in(23)
    • 0.156 in(12)
    • 0.157 in(12)
    • 0.158 in(12)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(54)
    • 0.125 mm(17)
    • 0.151 mm(52)
    • 0.176 mm(68)
    • 0.225 mm(45)
    • 0.25 mm(108)
    • 0.301 mm(131)
    • 0.375 mm(17)
    • 0.576 mm(23)
    • 0.601 mm(131)
    • 0.75 mm(131)
    • 1.5 mm(57)
    • 1.526 mm(45)
    • 2.0 mm(23)
    • 2.025 mm(23)
    • 2.401 mm(28)
    • 2.5 mm(28)
    • 2.526 mm(28)
    • 3.0 mm(23)
    • 3.026 mm(23)
    • 3.176 mm(23)
    • 3.95 mm(12)
    • 4.0 mm(12)
    • 4.025 mm(12)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • TN6026 (1)
    • WP10CT (166)
    • WP25CT (166)
    • WU10HT (96)
    • WU10PT (183)
    • WU25PT (201)
    Hand Of Tool
    Hand Of Tool
    • L (95)
    • R (112)
    Wiper Insert
    Wiper Insert
    • N (202)
    • Y (138)
    F Dimension
    F Dimension
    • 9.525 mm(5)
    • 10.0 mm(4)
    • 11.951 mm(2)
    • 12.0 mm(7)
    • 12.701 mm(8)
    • 15.851 mm(4)
    • 15.875 mm(6)
    • 15.9 mm(1)
    • 15.951 mm(2)
    • 15.976 mm(2)
    • 16.0 mm(14)
    • 19.05 mm(18)
    • 19.151 mm(2)
    • 19.951 mm(2)
    • 20.0 mm(18)
    • 24.951 mm(1)
    • 25.0 mm(42)
    • 25.151 mm(2)
    • 25.401 mm(19)
    • 25.425 mm(1)
    • 25.451 mm(1)
    • 25.5 mm(3)
    • 26.0 mm(8)
    • 29.0 mm(15)
    • 31.75 mm(4)
    • 32.0 mm(9)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.375 in(5)
    • 0.394 in(4)
    • 0.472 in(2)
    • 0.473 in(7)
    • 0.5 in(8)
    • 0.624 in(4)
    • 0.625 in(6)
    • 0.626 in(1)
    • 0.628 in(2)
    • 0.629 in(2)
    • 0.63 in(14)
    • 0.75 in(18)
    • 0.754 in(2)
    • 0.785 in(2)
    • 0.787 in(18)
    • 0.982 in(1)
    • 0.984 in(42)
    • 0.99 in(2)
    • 1.0 in(19)
    • 1.002 in(2)
    • 1.004 in(3)
    • 1.024 in(8)
    • 1.143 in(15)
    • 1.25 in(4)
    • 1.26 in(9)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 32.0 mm(1)
    • 38.0 mm(2)
    • 40.401 mm(4)
    • 41.0 mm(4)
    • 47.0 mm(15)
    • 52.0 mm(4)
    • 54.0 mm(4)
    • 54.1 mm(3)
    • 69.851 mm(2)
    • 70.0 mm(8)
    • 100.0 mm(9)
    • 101.601 mm(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.26 in(1)
    • 1.496 in(2)
    • 1.591 in(4)
    • 1.614 in(4)
    • 1.85 in(15)
    • 2.047 in(4)
    • 2.126 in(4)
    • 2.13 in(3)
    • 2.75 in(2)
    • 2.757 in(8)
    • 3.938 in(9)
    • 4.0 in(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(15)
    • 1.024 in(17)
    • 1.062 in(2)
    • 1.125 in(2)
    • 1.25 in(2)
    • 1.26 in(3)
    • 2.047 in(3)
    • 2.757 in(4)
    • 3.938 in(8)
    • 4.0 in(2)
    • 8.0 in(2)
    • 8.071 in(9)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(15)
    • 26.0 mm(17)
    • 26.975 mm(2)
    • 28.576 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 52.0 mm(3)
    • 70.0 mm(4)
    • 100.0 mm(8)
    • 101.601 mm(2)
    • 203.201 mm(2)
    • 205.0 mm(9)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (177)
    • S (30)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (30)
    • NEUTRAL (ZERO) (1)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.969 in(8)
    • 2.52 in(13)
    • 2.535 in(2)
    • 3.15 in(3)
    • 3.307 in(2)
    • 3.323 in(2)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 50.0 mm(8)
    • 64.0 mm(13)
    • 64.4 mm(2)
    • 80.0 mm(3)
    • 84.0 mm(2)
    • 84.4 mm(2)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (30)
    Front-End
    Clamp Style
    Clamp Style
    • C (3)
    • S (4)
    • Y (185)
    Cutting Width
    Cutting Width
    • 0.06 in(18)
    • 0.079 in(36)
    • 0.084 in(35)
    • 0.094 in(17)
    • 0.095 in(17)
    • 0.119 in(45)
    • 0.123 in(45)
    • 0.125 in(45)
    • 0.156 in(23)
    • 0.157 in(23)
    • 0.162 in(23)
    • 0.187 in(28)
    • 0.188 in(28)
    • 0.197 in(28)
    • 0.202 in(28)
    • 0.237 in(23)
    • 0.241 in(23)
    • 0.249 in(23)
    • 0.25 in(23)
    • 0.312 in(12)
    • 0.313 in(12)
    • 0.315 in(12)
    • 0.32 in(12)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 1.5 mm(18)
    • 2.0 mm(36)
    • 2.125 mm(35)
    • 2.375 mm(17)
    • 2.401 mm(17)
    • 3.0 mm(45)
    • 3.125 mm(45)
    • 3.176 mm(45)
    • 3.95 mm(23)
    • 4.0 mm(23)
    • 4.125 mm(23)
    • 4.75 mm(28)
    • 4.775 mm(28)
    • 5.0 mm(28)
    • 5.125 mm(28)
    • 6.0 mm(23)
    • 6.125 mm(23)
    • 6.325 mm(23)
    • 6.351 mm(23)
    • 7.926 mm(12)
    • 7.95 mm(12)
    • 8.0 mm(12)
    • 8.125 mm(12)
    Cutting Width MintoCutting Width Max
    Insert Size
    Insert Size
    • 1 (18)
    • 2 (32)
    • 2B (18)
    • 3 (45)
    • 4 (27)
    • 5 (29)
    • 6 (23)
    • 8 (12)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.394 in(15)
    • 0.42 in(3)
    • 0.433 in(11)
    • 0.44 in(8)
    • 0.492 in(1)
    • 0.512 in(19)
    • 0.531 in(2)
    • 0.551 in(12)
    • 0.56 in(9)
    • 0.564 in(2)
    • 0.61 in(2)
    • 0.625 in(5)
    • 0.63 in(15)
    • 0.65 in(16)
    • 0.728 in(2)
    • 0.748 in(20)
    • 0.75 in(10)
    • 0.866 in(19)
    • 0.875 in(8)
    • 0.945 in(5)
    • 0.984 in(12)
    • 1.0 in(11)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 10.0 mm(15)
    • 10.675 mm(3)
    • 11.0 mm(11)
    • 11.175 mm(8)
    • 12.5 mm(1)
    • 13.0 mm(19)
    • 13.5 mm(2)
    • 14.0 mm(12)
    • 14.226 mm(9)
    • 14.3 mm(2)
    • 15.5 mm(2)
    • 15.875 mm(5)
    • 16.0 mm(15)
    • 16.5 mm(16)
    • 18.5 mm(2)
    • 19.0 mm(20)
    • 19.05 mm(10)
    • 22.0 mm(19)
    • 22.225 mm(8)
    • 23.975 mm(5)
    • 25.0 mm(12)
    • 25.401 mm(11)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • H W (202)
    Back-End
    Connection Type
    Connection Type
    • BORING BAR (30)
    • SQUARE SHANK (172)
    Back-End Diameter
    Back-End Diameter
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.701 mm(1)
    • 31.75 mm(6)
    • 32.0 mm(8)
    • 38.1 mm(3)
    • 40.0 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.248 in(1)
    • 1.25 in(6)
    • 1.26 in(8)
    • 1.5 in(3)
    • 1.575 in(4)
    Back-End Diameter MintoBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(5)
    • 0.394 in(4)
    • 0.473 in(9)
    • 0.5 in(8)
    • 0.625 in(13)
    • 0.63 in(16)
    • 0.75 in(20)
    • 0.787 in(20)
    • 0.978 in(10)
    • 0.984 in(39)
    • 0.99 in(4)
    • 1.0 in(23)
    • 1.25 in(2)
    • 1.26 in(4)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(5)
    • 10.0 mm(4)
    • 12.0 mm(9)
    • 12.701 mm(8)
    • 15.875 mm(13)
    • 16.0 mm(16)
    • 19.05 mm(20)
    • 20.0 mm(20)
    • 24.85 mm(10)
    • 25.0 mm(39)
    • 25.151 mm(4)
    • 25.401 mm(23)
    • 31.75 mm(2)
    • 32.0 mm(4)
    Shank Height MintoShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(5)
    • 0.394 in(4)
    • 0.461 in(2)
    • 0.473 in(7)
    • 0.5 in(8)
    • 0.624 in(4)
    • 0.625 in(13)
    • 0.63 in(12)
    • 0.75 in(20)
    • 0.781 in(3)
    • 0.787 in(17)
    • 0.978 in(10)
    • 0.984 in(38)
    • 0.99 in(4)
    • 1.0 in(24)
    • 1.207 in(1)
    • 1.25 in(1)
    • 1.26 in(4)
    Shank Width MintoShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(5)
    • 10.0 mm(4)
    • 11.701 mm(2)
    • 12.0 mm(7)
    • 12.701 mm(8)
    • 15.851 mm(4)
    • 15.875 mm(13)
    • 16.0 mm(12)
    • 19.05 mm(20)
    • 19.85 mm(3)
    • 20.0 mm(17)
    • 24.85 mm(10)
    • 25.0 mm(38)
    • 25.151 mm(4)
    • 25.401 mm(24)
    • 30.651 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(4)
    Shank Width MintoShank Width Max
    No filters matching ""
    WMT Integral Toolholders for Face Grooving • Curve Out • Metric
    (19)

    WMT Integral Toolholders for Face Grooving • Curve Out • Metric

    WMT Integral I.D. Grooving Boring Bars • Metric
    (16)

    WMT Integral I.D. Grooving Boring Bars • Metric

    WMT Integral Toolholders • Swiss Style • Inch
    (14)

    WMT Integral Toolholders • Swiss Style • Inch

    WMT Integral Toolholders for Swiss-Style Machines • Metric
    (18)

    WMT Integral Toolholders for Swiss-Style Machines • Metric

    WMT Integral Toolholders • Inch
    (57)

    WMT Integral Toolholders • Inch

    WMT Integral Toolholders • Metric
    (60)

    WMT Integral Toolholders • Metric

    WMT Integral Toolholders for Face Grooving • Curve In • Metric
    (5)

    WMT Integral Toolholders for Face Grooving • Curve In • Metric

    WMT Integral I.D.Grooving Boring Bars • Inch
    (14)

    WMT Integral I.D.Grooving Boring Bars • Inch

    WMT Integral Toolholders • Face Grooving • Inch
    (3)

    WMT Integral Toolholders • Face Grooving • Inch

    WMT Integral Toolholders • Face Grooving • Inch
    (1)

    WMT Integral Toolholders • Face Grooving • Inch

    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Please enter a valid name
    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?