O.D. and I.D. Turning
Outside Diameter (OD) and Inside Diameter (ID) turning tools are engineered to drive efficiency and productivity in your metal-cutting operations. In OD turning, the outer surface of a workpiece is machined while in ID turning, the inner diameter of a workpiece is machined. WIDIA High-performance indexable inserts and toolholders are essential components offering advanced geometries, coatings, and materials to provide optimal chip control, surface finish quality, and tool life. WIDIA’s General indexable inserts offer flexibility and cost-efficiency. Additionally, boring bars are available to enlarge existing holes or create internal features with high precision and accuracy. OD and ID turning operations are essential for creating shafts, bushings, cylinders, and other cylindrical components with tight tolerances and superior surface finishes. With the right combination of high-performance inserts, tool holders, boring bars, and specialty turning tools, you can achieve exceptional results for your machining applications.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2830)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2807)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2807)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2830)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2816)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2816)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2793)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2793)
- M Stainless Steel (1781)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1781)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1764)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1764)
- K Cast Iron (2212)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2205)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2192)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2162)
- N Non-Ferrous Materials (1225)
- N1Wrought Aluminum (1202)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1216)
- N3High-Silicon Aluminum Alloys Si >12.2%(842)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (902)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (718)
- N6Carbon, Graphite Composites, CFRP (710)
- N7MMC's (558)
- S High-Temp Alloys (1507)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1506)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1506)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1492)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1070)
- H Hardened Materials (694)
- H1Hardened Materials 44-48 HRC(694)
- H2Hardened Materials 48-55 HRC(694)
- H3Hardened Materials 56-60 HRC(649)
- H4Hardened Materials >60 HRC(649)
Select All Star
- CN (147)
- DE (789)
- GB (98)
- IN (427)
- SG (316)
- US (485)
Applications
Applications
Back Boring (54)
Boring (20)
CRT Profiling (16)
Chamfer Turning (3)
Facing (308)
Grooving (4)
ID Facing (29)
ID Grooving (3)
ID Thread Turning (5)
Multiple Direction Cutting (741)
OD Thread Turning (3)
Turning (423)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1320)
- Lightly Interrupted Cut (1927)
- Smooth Cut (2348)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 0.0 (1)
- 45.0 (55)
- 50.0 (5)
- 53.0 (1)
- 60.0 (13)
- 62.5 (9)
- 63.0 (7)
- 67.5 (5)
- 72.5 (8)
- 75.0 (63)
- 85.0 (2)
- 90.0 (176)
- 92.0 (16)
- 92.5 (3)
- 93.0 (173)
- 95.0 (366)
- 97.0 (11)
- 107.5 (35)
- 117.5 (5)
to
Connection Style
Connection Style
- Boring Bar Shank (480)
- Toolholder (415)
- WHISTLE NOTCH 5° A/B BoringBar (32)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (2)
- 1.0 (652)
- 2.0 (969)
- 3.0 (510)
- 4.0 (1025)
- 6.0 (495)
- 8.0 (707)
to
Over All Length [L]
Over All Length [L]
- 1.05 in(1)
- 1.26 in(4)
- 1.272 in(1)
- 1.3 in(1)
- 1.55 in(1)
- 1.575 in(4)
- 1.969 in(1)
- 1.971 in(2)
- 1.972 in(2)
- 1.998 in(1)
- 2.056 in(1)
- 2.134 in(1)
- 2.165 in(6)
- 2.178 in(2)
- 2.206 in(1)
- 2.285 in(1)
- 2.362 in(1)
- 2.375 in(2)
- 2.48 in(3)
- 2.5 in(26)
- 2.75 in(12)
- 2.757 in(9)
- 2.843 in(1)
- 3.0 in(15)
- 3.125 in(1)
- 3.15 in(10)
- 3.375 in(4)
- 3.5 in(11)
- 3.75 in(9)
- 3.938 in(22)
- 3.95 in(3)
- 3.96 in(2)
- 3.996 in(2)
- 4.0 in(55)
- 4.25 in(5)
- 4.331 in(5)
- 4.5 in(22)
- 4.75 in(2)
- 4.852 in(1)
- 4.892 in(1)
- 4.912 in(1)
- 4.921 in(85)
- 4.996 in(1)
- 5.0 in(17)
- 5.513 in(1)
- 5.876 in(1)
- 5.896 in(1)
- 5.906 in(110)
- 5.955 in(2)
- 5.984 in(1)
- 5.99 in(2)
- 6.0 in(126)
- 6.071 in(1)
- 6.694 in(73)
- 6.732 in(1)
- 7.0 in(4)
- 7.087 in(8)
- 7.875 in(39)
- 8.0 in(23)
- 9.843 in(55)
- 9.9 in(2)
- 10.0 in(30)
- 11.811 in(40)
- 12.0 in(11)
- 13.781 in(10)
- 14.0 in(11)
- 15.749 in(4)
- 16.0 in(6)
to
Over All Length [L]
Over All Length [L]
- 26.675 mm(1)
- 32.0 mm(4)
- 32.301 mm(1)
- 33.025 mm(1)
- 39.375 mm(1)
- 40.0 mm(4)
- 50.0 mm(1)
- 50.075 mm(2)
- 50.1 mm(2)
- 50.75 mm(1)
- 52.225 mm(1)
- 54.2 mm(1)
- 55.0 mm(6)
- 55.325 mm(2)
- 56.026 mm(1)
- 58.051 mm(1)
- 60.0 mm(1)
- 60.325 mm(2)
- 63.0 mm(3)
- 63.5 mm(26)
- 69.851 mm(12)
- 70.0 mm(9)
- 72.2 mm(1)
- 76.2 mm(15)
- 79.375 mm(1)
- 80.0 mm(10)
- 85.726 mm(4)
- 88.9 mm(11)
- 95.25 mm(9)
- 100.0 mm(22)
- 100.325 mm(3)
- 100.575 mm(2)
- 101.5 mm(2)
- 101.601 mm(55)
- 107.95 mm(5)
- 110.0 mm(5)
- 114.301 mm(22)
- 120.65 mm(2)
- 123.25 mm(1)
- 124.25 mm(1)
- 124.75 mm(1)
- 125.0 mm(85)
- 126.9 mm(1)
- 127.0 mm(17)
- 140.0 mm(1)
- 149.25 mm(1)
- 149.75 mm(1)
- 150.0 mm(110)
- 151.25 mm(2)
- 152.0 mm(1)
- 152.15 mm(2)
- 152.4 mm(126)
- 154.201 mm(1)
- 170.0 mm(73)
- 171.0 mm(1)
- 177.8 mm(4)
- 180.0 mm(8)
- 200.0 mm(39)
- 203.201 mm(23)
- 250.0 mm(55)
- 251.451 mm(2)
- 254.0 mm(30)
- 300.0 mm(40)
- 304.8 mm(11)
- 350.0 mm(10)
- 355.6 mm(11)
- 400.0 mm(4)
- 406.401 mm(6)
to
Corner Radius
Corner Radius
- 0.002 in(100)
- 0.004 in(266)
- 0.005 in(5)
- 0.007 in(274)
- 0.008 in(445)
- 0.014 in(35)
- 0.015 in(257)
- 0.016 in(1192)
- 0.024 in(31)
- 0.031 in(1670)
- 0.037 in(1)
- 0.047 in(934)
- 0.063 in(466)
- 0.079 in(3)
- 0.094 in(2)
- 0.095 in(115)
- 0.119 in(9)
- 0.125 in(2)
- 0.157 in(15)
- 0.188 in(9)
- 0.197 in(9)
- 0.237 in(11)
- 0.25 in(31)
- 0.315 in(6)
- 0.354 in(11)
- 0.375 in(4)
- 0.394 in(18)
- 0.473 in(11)
- 0.492 in(3)
- 0.512 in(12)
- 0.591 in(12)
- 0.63 in(2)
- 0.709 in(12)
- 0.787 in(12)
- 0.866 in(12)
- 0.984 in(12)
- 1.063 in(12)
- 1.102 in(11)
- 1.181 in(12)
- 1.379 in(12)
- 1.575 in(12)
- 1.772 in(12)
- 1.969 in(12)
- 2.165 in(11)
- 2.362 in(12)
- 2.559 in(11)
- 2.757 in(1)
- 2.953 in(11)
- 3.15 in(12)
to
Corner Radius
Corner Radius
- 0.05 mm(100)
- 0.1 mm(266)
- 0.125 mm(5)
- 0.176 mm(274)
- 0.2 mm(445)
- 0.351 mm(35)
- 0.375 mm(257)
- 0.4 mm(1192)
- 0.601 mm(31)
- 0.775 mm(76)
- 0.8 mm(1620)
- 0.951 mm(1)
- 1.201 mm(934)
- 1.6 mm(466)
- 2.0 mm(3)
- 2.375 mm(2)
- 2.401 mm(115)
- 3.0 mm(9)
- 3.176 mm(2)
- 4.0 mm(15)
- 4.775 mm(9)
- 5.0 mm(9)
- 6.0 mm(11)
- 6.351 mm(31)
- 8.0 mm(6)
- 9.0 mm(11)
- 9.525 mm(4)
- 10.0 mm(18)
- 12.0 mm(11)
- 12.5 mm(3)
- 13.0 mm(12)
- 15.0 mm(12)
- 16.0 mm(2)
- 18.0 mm(12)
- 20.0 mm(12)
- 22.0 mm(12)
- 25.0 mm(12)
- 27.0 mm(12)
- 28.0 mm(11)
- 30.0 mm(12)
- 35.0 mm(12)
- 40.0 mm(12)
- 45.0 mm(12)
- 50.0 mm(12)
- 55.0 mm(11)
- 60.0 mm(12)
- 65.0 mm(11)
- 70.0 mm(1)
- 75.0 mm(11)
- 80.0 mm(12)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(2492)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(2492)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- ALO (139)
- AT15S (1)
- C2 (59)
- C25 (163)
- C3 (36)
- CBN6 (40)
- CG5 (333)
- CG55 (20)
- CG6 (247)
- CM1 (282)
- CPD1 (59)
- CW2015 (329)
- CW3020 (26)
- CW5025 (313)
- HCK10 (131)
- HK1500 (350)
- HK15M (4)
- HK35 (125)
- HWK10 (13)
- HWK15 (138)
- K420 (39)
- PB100 (168)
- PB170 (129)
- PB250 (181)
- PB300 (111)
- PD100 (129)
- PD50 (103)
- RC3503 (4)
- SP0A00 (34)
- SP0B00 (5)
- SP0G00 (21)
- SP0NTA (11)
- SP0PW3 (13)
- SP3900 (4)
- SPN3W1 (22)
- SPN4W2 (15)
- SPTM00 (4)
- THM (459)
- THM X (1)
- THM-F (10)
- THM-X (281)
- THMF-X (132)
- TN1000 (33)
- TN10P (553)
- TN10U (505)
- TN15M (515)
- TN15U (406)
- TN2000 (432)
- TN20K (570)
- TN20P (625)
- TN30M (544)
- TN30P (298)
- TN35 (9)
- TN4000 (381)
- TN5015 (458)
- TN5020 (461)
- TN5105 (372)
- TN5120 (503)
- TN6010 (244)
- TN6025 (269)
- TN6540 (1)
- TN7 (195)
- TN7005 (267)
- TN7010 (515)
- TN7015 (529)
- TN7025 (514)
- TN7035 (480)
- TN7105 (385)
- TN7110 (491)
- TN7115 (516)
- TN7125 (510)
- TN7135 (488)
- TN8025 (464)
- TTI15 (271)
- TTM (34)
- TTM08 (12)
- TTM09 (142)
- TTMS (5)
- TTR (292)
- TTR-X (22)
- TTS (255)
- TTX (269)
- W00159 (1)
- W00160 (3)
- W00162 (16)
- W00342 (73)
- WBH10C (324)
- WBH10P (294)
- WBH10U (375)
- WBH20P (366)
- WBH25P (343)
- WBH25U (266)
- WBH30P (266)
- WBH40C (1)
- WBK40U (119)
- WBK45U (234)
- WDN00U (172)
- WDN10U (35)
- WDN15U (3)
- WDN25U (480)
- WK05CT (555)
- WK15CT (420)
- WK20CT (953)
- WM15CT (630)
- WM25CT (795)
- WM35CT (378)
- WP05CT (101)
- WP15CT (856)
- WP20TT (97)
- WP25CT (912)
- WP35CM (1)
- WP35CT (625)
- WS10PT (581)
- WS25PT (530)
- WU05PT (161)
- WU10HT (562)
- WU10PT (452)
- WU20HT (29)
- WU25PT (479)
- YY4200 (4)
Hand Of Tool
Hand Of Tool
- L (284)
- N (62)
- R (581)
Wiper Insert
Wiper Insert
- N (3320)
- Y (261)
F Dimension
F Dimension
- 0.0 mm(4)
- 0.601 mm(1)
- 0.65 mm(5)
- 1.05 mm(4)
- 1.075 mm(1)
- 1.175 mm(1)
- 1.401 mm(1)
- 1.451 mm(5)
- 1.55 mm(1)
- 1.776 mm(3)
- 1.85 mm(3)
- 1.925 mm(3)
- 2.225 mm(3)
- 2.401 mm(11)
- 2.651 mm(17)
- 2.825 mm(4)
- 2.95 mm(8)
- 2.975 mm(2)
- 3.026 mm(5)
- 3.051 mm(2)
- 3.1 mm(5)
- 3.125 mm(1)
- 3.176 mm(2)
- 3.2 mm(10)
- 3.401 mm(2)
- 3.426 mm(1)
- 3.6 mm(1)
- 3.625 mm(1)
- 3.676 mm(14)
- 3.7 mm(3)
- 3.725 mm(4)
- 3.825 mm(1)
- 3.85 mm(4)
- 3.901 mm(2)
- 3.95 mm(17)
- 4.0 mm(1)
- 4.275 mm(1)
- 4.425 mm(3)
- 4.45 mm(2)
- 4.5 mm(4)
- 4.7 mm(6)
- 4.75 mm(15)
- 4.801 mm(1)
- 5.0 mm(2)
- 5.2 mm(1)
- 5.301 mm(2)
- 5.351 mm(3)
- 5.551 mm(2)
- 5.601 mm(16)
- 5.65 mm(1)
- 5.801 mm(5)
- 5.875 mm(2)
- 5.95 mm(2)
- 6.0 mm(11)
- 6.351 mm(8)
- 6.375 mm(4)
- 6.551 mm(1)
- 6.601 mm(2)
- 6.801 mm(1)
- 6.875 mm(1)
- 6.926 mm(3)
- 7.0 mm(14)
- 7.075 mm(2)
- 7.101 mm(1)
- 7.301 mm(1)
- 7.525 mm(10)
- 7.551 mm(1)
- 7.926 mm(13)
- 8.0 mm(1)
- 8.125 mm(2)
- 8.6 mm(5)
- 8.65 mm(1)
- 8.701 mm(1)
- 8.75 mm(2)
- 8.9 mm(1)
- 8.975 mm(4)
- 9.0 mm(11)
- 9.5 mm(5)
- 9.525 mm(3)
- 9.65 mm(3)
- 9.951 mm(1)
- 9.976 mm(7)
- 10.0 mm(7)
- 10.3 mm(5)
- 10.351 mm(2)
- 11.0 mm(23)
- 11.101 mm(3)
- 11.675 mm(7)
- 12.0 mm(9)
- 12.25 mm(1)
- 12.5 mm(17)
- 12.601 mm(1)
- 12.625 mm(1)
- 12.701 mm(17)
- 12.875 mm(1)
- 13.0 mm(23)
- 13.925 mm(1)
- 14.0 mm(1)
- 14.275 mm(5)
- 14.851 mm(4)
- 15.0 mm(2)
- 15.5 mm(1)
- 15.875 mm(4)
- 16.0 mm(10)
- 16.25 mm(6)
- 16.5 mm(1)
- 17.0 mm(35)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.05 mm(5)
- 19.425 mm(5)
- 19.5 mm(1)
- 20.0 mm(19)
- 22.0 mm(32)
- 22.6 mm(4)
- 23.151 mm(2)
- 25.0 mm(62)
- 25.401 mm(18)
- 27.0 mm(25)
- 28.451 mm(1)
- 28.651 mm(1)
- 30.0 mm(1)
- 31.75 mm(38)
- 32.0 mm(99)
- 32.551 mm(3)
- 33.551 mm(1)
- 34.801 mm(1)
- 35.0 mm(13)
- 38.1 mm(12)
- 38.901 mm(2)
- 40.0 mm(32)
- 43.0 mm(1)
- 47.026 mm(1)
- 50.0 mm(12)
- 50.801 mm(5)
to
F Dimension
F Dimension
- 0.0 in(4)
- 0.024 in(1)
- 0.027 in(5)
- 0.041 in(4)
- 0.042 in(1)
- 0.046 in(1)
- 0.055 in(1)
- 0.057 in(5)
- 0.061 in(1)
- 0.07 in(3)
- 0.073 in(3)
- 0.076 in(3)
- 0.088 in(3)
- 0.095 in(11)
- 0.105 in(17)
- 0.111 in(4)
- 0.116 in(8)
- 0.117 in(2)
- 0.12 in(7)
- 0.122 in(5)
- 0.123 in(1)
- 0.125 in(2)
- 0.126 in(10)
- 0.134 in(2)
- 0.135 in(1)
- 0.143 in(1)
- 0.144 in(1)
- 0.145 in(14)
- 0.146 in(3)
- 0.147 in(4)
- 0.151 in(1)
- 0.152 in(4)
- 0.154 in(2)
- 0.156 in(17)
- 0.157 in(1)
- 0.168 in(1)
- 0.175 in(3)
- 0.176 in(2)
- 0.177 in(4)
- 0.185 in(6)
- 0.187 in(15)
- 0.189 in(1)
- 0.197 in(2)
- 0.206 in(1)
- 0.209 in(2)
- 0.211 in(3)
- 0.219 in(2)
- 0.221 in(16)
- 0.222 in(1)
- 0.228 in(5)
- 0.231 in(2)
- 0.234 in(2)
- 0.237 in(11)
- 0.25 in(8)
- 0.251 in(4)
- 0.258 in(1)
- 0.26 in(2)
- 0.268 in(1)
- 0.271 in(1)
- 0.273 in(3)
- 0.276 in(14)
- 0.279 in(2)
- 0.28 in(1)
- 0.288 in(1)
- 0.296 in(10)
- 0.297 in(1)
- 0.312 in(13)
- 0.315 in(1)
- 0.32 in(2)
- 0.339 in(5)
- 0.341 in(1)
- 0.343 in(1)
- 0.345 in(2)
- 0.351 in(1)
- 0.353 in(4)
- 0.354 in(11)
- 0.374 in(5)
- 0.375 in(3)
- 0.38 in(3)
- 0.392 in(1)
- 0.393 in(7)
- 0.394 in(7)
- 0.406 in(5)
- 0.409 in(2)
- 0.433 in(23)
- 0.437 in(3)
- 0.46 in(7)
- 0.473 in(9)
- 0.482 in(1)
- 0.492 in(17)
- 0.496 in(1)
- 0.497 in(1)
- 0.5 in(17)
- 0.507 in(1)
- 0.512 in(23)
- 0.548 in(1)
- 0.551 in(1)
- 0.562 in(5)
- 0.585 in(4)
- 0.591 in(2)
- 0.61 in(1)
- 0.625 in(4)
- 0.63 in(10)
- 0.64 in(6)
- 0.65 in(1)
- 0.669 in(35)
- 0.69 in(1)
- 0.709 in(1)
- 0.728 in(1)
- 0.75 in(5)
- 0.765 in(5)
- 0.768 in(1)
- 0.787 in(19)
- 0.866 in(32)
- 0.89 in(4)
- 0.911 in(2)
- 0.984 in(62)
- 1.0 in(18)
- 1.063 in(25)
- 1.12 in(1)
- 1.129 in(1)
- 1.181 in(1)
- 1.25 in(38)
- 1.26 in(99)
- 1.282 in(3)
- 1.321 in(1)
- 1.37 in(1)
- 1.379 in(13)
- 1.5 in(12)
- 1.532 in(2)
- 1.575 in(32)
- 1.693 in(1)
- 1.851 in(1)
- 1.969 in(12)
- 2.0 in(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.576 mm(5)
- 2.401 mm(5)
- 2.801 mm(1)
- 3.176 mm(5)
- 3.551 mm(1)
- 3.95 mm(3)
- 4.45 mm(3)
- 4.575 mm(11)
- 4.75 mm(3)
- 5.176 mm(8)
- 5.275 mm(9)
- 5.551 mm(4)
- 5.7 mm(2)
- 5.775 mm(1)
- 5.801 mm(7)
- 5.95 mm(11)
- 6.2 mm(1)
- 6.351 mm(2)
- 6.601 mm(2)
- 6.775 mm(1)
- 6.9 mm(2)
- 6.976 mm(10)
- 7.051 mm(3)
- 7.075 mm(2)
- 7.101 mm(2)
- 7.25 mm(16)
- 7.426 mm(4)
- 7.525 mm(15)
- 7.926 mm(3)
- 8.0 mm(3)
- 8.175 mm(2)
- 8.6 mm(1)
- 8.8 mm(3)
- 9.05 mm(6)
- 9.1 mm(15)
- 9.15 mm(8)
- 9.976 mm(1)
- 10.0 mm(3)
- 10.15 mm(2)
- 10.351 mm(1)
- 10.5 mm(3)
- 10.675 mm(2)
- 10.75 mm(4)
- 11.0 mm(8)
- 11.125 mm(13)
- 11.15 mm(1)
- 11.375 mm(1)
- 11.9 mm(1)
- 12.15 mm(1)
- 12.201 mm(7)
- 12.226 mm(2)
- 12.5 mm(1)
- 12.9 mm(1)
- 13.0 mm(14)
- 13.076 mm(4)
- 13.15 mm(1)
- 13.351 mm(2)
- 13.675 mm(3)
- 13.726 mm(2)
- 13.851 mm(1)
- 14.3 mm(10)
- 15.25 mm(10)
- 15.326 mm(1)
- 15.375 mm(1)
- 15.4 mm(1)
- 15.875 mm(1)
- 16.0 mm(13)
- 16.25 mm(2)
- 16.375 mm(3)
- 16.975 mm(3)
- 17.026 mm(1)
- 17.1 mm(2)
- 17.25 mm(1)
- 17.276 mm(3)
- 17.475 mm(1)
- 18.3 mm(7)
- 18.55 mm(2)
- 19.05 mm(1)
- 19.425 mm(1)
- 19.55 mm(5)
- 20.0 mm(20)
- 20.25 mm(2)
- 21.6 mm(7)
- 23.625 mm(10)
- 23.75 mm(1)
- 24.6 mm(3)
- 24.901 mm(5)
- 25.0 mm(22)
- 27.0 mm(2)
- 27.951 mm(4)
- 30.475 mm(5)
- 31.0 mm(1)
- 32.0 mm(30)
- 33.025 mm(3)
- 37.0 mm(1)
- 37.35 mm(5)
- 40.0 mm(30)
- 43.301 mm(1)
- 44.7 mm(4)
- 45.0 mm(1)
- 48.0 mm(1)
- 50.0 mm(25)
- 50.801 mm(1)
- 52.0 mm(1)
- 55.0 mm(1)
- 60.0 mm(3)
- 60.95 mm(3)
- 63.0 mm(6)
- 63.5 mm(1)
- 70.0 mm(3)
- 76.95 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.062 in(5)
- 0.095 in(5)
- 0.11 in(1)
- 0.125 in(5)
- 0.14 in(1)
- 0.156 in(3)
- 0.176 in(3)
- 0.18 in(11)
- 0.187 in(3)
- 0.205 in(8)
- 0.209 in(9)
- 0.219 in(4)
- 0.224 in(2)
- 0.227 in(1)
- 0.228 in(7)
- 0.234 in(11)
- 0.244 in(1)
- 0.25 in(2)
- 0.26 in(2)
- 0.267 in(1)
- 0.272 in(2)
- 0.275 in(10)
- 0.278 in(3)
- 0.279 in(2)
- 0.28 in(2)
- 0.286 in(16)
- 0.292 in(4)
- 0.296 in(15)
- 0.312 in(3)
- 0.315 in(3)
- 0.322 in(2)
- 0.339 in(1)
- 0.347 in(3)
- 0.356 in(6)
- 0.358 in(15)
- 0.36 in(8)
- 0.393 in(1)
- 0.394 in(3)
- 0.4 in(2)
- 0.409 in(1)
- 0.414 in(3)
- 0.42 in(2)
- 0.423 in(4)
- 0.433 in(8)
- 0.438 in(13)
- 0.439 in(1)
- 0.448 in(1)
- 0.47 in(1)
- 0.479 in(1)
- 0.48 in(7)
- 0.481 in(2)
- 0.492 in(1)
- 0.508 in(1)
- 0.512 in(14)
- 0.515 in(4)
- 0.518 in(1)
- 0.526 in(2)
- 0.538 in(3)
- 0.54 in(2)
- 0.545 in(1)
- 0.564 in(10)
- 0.6 in(10)
- 0.603 in(1)
- 0.605 in(1)
- 0.606 in(1)
- 0.625 in(1)
- 0.63 in(13)
- 0.64 in(2)
- 0.645 in(3)
- 0.668 in(3)
- 0.67 in(1)
- 0.673 in(2)
- 0.679 in(1)
- 0.68 in(3)
- 0.689 in(1)
- 0.72 in(7)
- 0.73 in(2)
- 0.75 in(1)
- 0.765 in(1)
- 0.77 in(5)
- 0.787 in(20)
- 0.797 in(2)
- 0.85 in(7)
- 0.93 in(10)
- 0.935 in(1)
- 0.969 in(3)
- 0.98 in(5)
- 0.984 in(22)
- 1.063 in(2)
- 1.1 in(4)
- 1.2 in(5)
- 1.22 in(1)
- 1.26 in(30)
- 1.3 in(3)
- 1.457 in(1)
- 1.47 in(5)
- 1.575 in(30)
- 1.705 in(1)
- 1.76 in(4)
- 1.772 in(1)
- 1.891 in(1)
- 1.969 in(25)
- 2.0 in(1)
- 2.047 in(1)
- 2.165 in(1)
- 2.362 in(3)
- 2.4 in(3)
- 2.48 in(6)
- 2.5 in(1)
- 2.757 in(3)
- 3.031 in(2)
to
Cutting Direction
Cutting Direction
- B (388)
- E (251)
- P (14)
- S (274)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (316)
- DOUBLE POSITIVE (1)
- NEGATIVE-ZERO (214)
- NEUTRAL (ZERO) (183)
- POSITIVE-NEGATIVE (3)
- POSITIVE-ZERO (181)
Maximum Bore Depth
Maximum Bore Depth
- 0.187 in(1)
- 0.213 in(2)
- 0.281 in(3)
- 0.312 in(3)
- 0.375 in(4)
- 0.484 in(1)
- 0.5 in(18)
- 0.6 in(1)
- 0.625 in(2)
- 0.63 in(2)
- 0.75 in(17)
- 0.787 in(3)
- 0.826 in(1)
- 0.875 in(6)
- 0.9 in(2)
- 0.935 in(3)
- 0.946 in(4)
- 1.0 in(28)
- 1.014 in(1)
- 1.124 in(4)
- 1.125 in(15)
- 1.181 in(2)
- 1.25 in(22)
- 1.26 in(4)
- 1.379 in(3)
- 1.417 in(9)
- 1.498 in(6)
- 1.499 in(9)
- 1.5 in(29)
- 1.502 in(3)
- 1.575 in(14)
- 1.872 in(1)
- 1.873 in(6)
- 1.874 in(1)
- 1.875 in(10)
- 1.891 in(17)
- 2.0 in(19)
- 2.125 in(1)
- 2.249 in(8)
- 2.25 in(3)
- 2.362 in(5)
- 2.499 in(4)
- 2.5 in(7)
- 2.501 in(4)
- 2.52 in(13)
- 2.835 in(9)
- 3.0 in(34)
- 3.008 in(1)
- 3.15 in(9)
- 3.749 in(7)
- 3.75 in(1)
- 3.781 in(10)
- 3.938 in(25)
- 4.0 in(9)
- 4.498 in(3)
- 4.5 in(2)
- 4.724 in(11)
- 4.992 in(2)
- 5.0 in(4)
- 5.039 in(23)
- 5.906 in(6)
- 6.0 in(8)
- 6.299 in(17)
- 7.559 in(1)
- 7.875 in(6)
- 8.0 in(4)
- 10.0 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 4.75 mm(1)
- 5.4 mm(2)
- 7.125 mm(3)
- 7.926 mm(3)
- 9.525 mm(4)
- 12.3 mm(1)
- 12.701 mm(18)
- 15.25 mm(1)
- 15.875 mm(2)
- 16.0 mm(2)
- 19.05 mm(17)
- 20.0 mm(3)
- 20.951 mm(1)
- 22.225 mm(6)
- 22.85 mm(2)
- 23.75 mm(3)
- 24.0 mm(4)
- 25.401 mm(28)
- 25.725 mm(1)
- 28.55 mm(4)
- 28.576 mm(15)
- 30.0 mm(2)
- 31.75 mm(22)
- 32.0 mm(4)
- 35.0 mm(3)
- 36.0 mm(9)
- 38.051 mm(6)
- 38.075 mm(9)
- 38.1 mm(29)
- 38.125 mm(3)
- 40.0 mm(14)
- 47.551 mm(1)
- 47.575 mm(6)
- 47.6 mm(1)
- 47.625 mm(10)
- 48.0 mm(17)
- 50.801 mm(19)
- 53.975 mm(1)
- 57.125 mm(8)
- 57.151 mm(3)
- 60.0 mm(5)
- 63.475 mm(4)
- 63.5 mm(7)
- 63.526 mm(4)
- 64.0 mm(13)
- 72.0 mm(9)
- 76.2 mm(34)
- 76.4 mm(1)
- 80.0 mm(9)
- 95.226 mm(7)
- 95.25 mm(1)
- 96.0 mm(10)
- 100.0 mm(25)
- 101.601 mm(9)
- 114.25 mm(3)
- 114.301 mm(2)
- 120.0 mm(11)
- 126.801 mm(2)
- 127.0 mm(4)
- 128.0 mm(23)
- 150.0 mm(6)
- 152.4 mm(8)
- 160.0 mm(17)
- 192.0 mm(1)
- 200.0 mm(6)
- 203.201 mm(4)
- 254.0 mm(2)
to
Boring Bar Material
Boring Bar Material
- C (184)
- S (301)
Front-End
Clamp Style
Clamp Style
- C (32)
- D (193)
- M (42)
- N (3)
- P (135)
- S (484)
Cutting Width
Cutting Width
- 0.025 in(1)
- 0.03 in(6)
- 0.04 in(1)
- 0.05 in(1)
- 0.06 in(4)
to
Cutting Width
Cutting Width
- 0.625 mm(1)
- 0.75 mm(6)
- 1.026 mm(1)
- 1.276 mm(1)
- 1.526 mm(4)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (1035)
- D-DIAMOND/RHOMBIC 55 (526)
- E-DIAMOND/RHOMBIC 75 (1)
- G-RHOMBIC 45 (44)
- GROOVING/CUTOFF MISC (6)
- L-RECTANGLE 90 (8)
- N/K-PARALLELOGRAM 55 (2)
- R-ROUND (106)
- S-SQUARE 90 (439)
- S-SQUARE ON EDGE 90 (1)
- T-TRIANGLE 60 (706)
- THREADING (6)
- V-DIAMOND/RHOMBIC 35 (252)
- W-TRIGON 80 (262)
Cartridge Size
Cartridge Size
- 08 - mm of Cutting Height (3)
- 10 - mm of Cutting Height (7)
- 12 - mm of Cutting Height (11)
- 16 - mm of Cutting Height (3)
- 20 - mm of Cutting Height (3)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.017 in(1)
- 0.028 in(1)
- 0.03 in(1)
- 0.033 in(2)
- 0.035 in(1)
- 0.04 in(3)
- 0.05 in(2)
- 0.06 in(2)
- 0.062 in(2)
- 0.075 in(1)
- 0.078 in(1)
- 0.09 in(3)
- 0.091 in(6)
- 0.092 in(1)
- 0.093 in(3)
- 0.098 in(1)
- 0.103 in(1)
- 0.11 in(1)
- 0.116 in(1)
- 0.12 in(6)
- 0.121 in(3)
- 0.125 in(5)
- 0.13 in(2)
- 0.146 in(1)
- 0.147 in(1)
- 0.168 in(1)
- 0.183 in(1)
- 0.187 in(1)
- 0.63 in(2)
- 0.748 in(1)
- 0.776 in(2)
- 0.787 in(2)
- 0.984 in(3)
- 1.102 in(1)
- 1.143 in(2)
- 1.379 in(4)
- 1.496 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.426 mm(1)
- 0.701 mm(1)
- 0.75 mm(1)
- 0.826 mm(2)
- 0.9 mm(1)
- 1.026 mm(3)
- 1.276 mm(2)
- 1.526 mm(2)
- 1.576 mm(2)
- 1.901 mm(1)
- 1.975 mm(1)
- 2.275 mm(3)
- 2.301 mm(6)
- 2.325 mm(1)
- 2.35 mm(3)
- 2.5 mm(1)
- 2.6 mm(1)
- 2.801 mm(1)
- 2.95 mm(1)
- 3.026 mm(2)
- 3.051 mm(4)
- 3.075 mm(3)
- 3.176 mm(5)
- 3.301 mm(2)
- 3.7 mm(1)
- 3.725 mm(1)
- 4.275 mm(1)
- 4.65 mm(1)
- 4.75 mm(1)
- 16.0 mm(2)
- 19.0 mm(1)
- 19.701 mm(2)
- 20.0 mm(2)
- 25.0 mm(3)
- 28.0 mm(1)
- 29.0 mm(2)
- 35.0 mm(4)
- 38.0 mm(1)
to
Thread TPI
Thread TPI
- 24.0 (2)
- 48.0 (1)
to
Thread Pitch
Thread Pitch
- 1.0 mm(1)
- 2.5 mm(2)
to
Thread Pitch
Thread Pitch
- 0.039 in(1)
- 0.098 in(2)
to
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (721)
- D-DIAMOND/RHOMBIC 55 (385)
- E-DIAMOND/RHOMBIC 75 (1)
- G-RHOMBIC 45 (17)
- GROOVING/CUTOFF MISC (4)
- L-RECTANGLE 90 (8)
- R-ROUND (80)
- S-SQUARE 90 (342)
- T-TRIANGLE 60 (518)
- THREADING (3)
- V-DIAMOND/RHOMBIC 35 (191)
- W-TRIGON 80 (198)
Insert IC Size
Insert IC Size
- 3.975 mm(40)
- 4.075 mm(32)
- 4.15 mm(1)
- 4.75 mm(5)
- 4.775 mm(4)
- 4.825 mm(3)
- 6.0 mm(6)
- 6.351 mm(227)
- 7.15 mm(12)
- 7.95 mm(2)
- 8.0 mm(5)
- 9.525 mm(787)
- 9.8 mm(1)
- 10.0 mm(8)
- 12.0 mm(9)
- 12.701 mm(969)
- 15.875 mm(137)
- 16.0 mm(6)
- 19.05 mm(169)
- 20.0 mm(7)
- 25.0 mm(3)
- 25.401 mm(23)
- 32.0 mm(2)
to
Insert IC Size
Insert IC Size
- 0.156 in(40)
- 0.16 in(32)
- 0.163 in(1)
- 0.187 in(5)
- 0.188 in(4)
- 0.19 in(3)
- 0.237 in(6)
- 0.25 in(227)
- 0.281 in(12)
- 0.313 in(2)
- 0.315 in(5)
- 0.375 in(787)
- 0.386 in(1)
- 0.394 in(8)
- 0.473 in(9)
- 0.5 in(969)
- 0.625 in(137)
- 0.63 in(6)
- 0.75 in(169)
- 0.787 in(7)
- 0.984 in(3)
- 1.0 in(23)
- 1.26 in(2)
to
Cutting Edge Length
Cutting Edge Length
- 3.25 mm(5)
- 4.025 mm(30)
- 4.05 mm(1)
- 4.351 mm(4)
- 5.601 mm(6)
- 5.75 mm(4)
- 6.45 mm(75)
- 6.476 mm(2)
- 6.525 mm(46)
- 6.726 mm(4)
- 6.825 mm(3)
- 7.025 mm(5)
- 7.051 mm(23)
- 7.176 mm(1)
- 7.75 mm(32)
- 8.05 mm(2)
- 8.675 mm(135)
- 8.701 mm(8)
- 9.525 mm(44)
- 9.675 mm(137)
- 11.0 mm(94)
- 11.076 mm(14)
- 11.601 mm(2)
- 11.625 mm(121)
- 12.201 mm(1)
- 12.451 mm(12)
- 12.701 mm(151)
- 12.9 mm(313)
- 13.15 mm(1)
- 13.9 mm(5)
- 15.5 mm(231)
- 15.875 mm(56)
- 16.125 mm(62)
- 16.45 mm(1)
- 16.5 mm(271)
- 16.6 mm(145)
- 16.651 mm(6)
- 16.975 mm(1)
- 19.05 mm(81)
- 19.35 mm(84)
- 19.375 mm(2)
- 22.0 mm(97)
- 22.151 mm(13)
- 25.401 mm(19)
- 25.8 mm(4)
- 27.5 mm(17)
- 30.0 mm(3)
- 33.0 mm(4)
- 40.0 mm(1)
to
Cutting Edge Length
Cutting Edge Length
- 0.128 in(5)
- 0.158 in(30)
- 0.159 in(1)
- 0.171 in(4)
- 0.221 in(6)
- 0.226 in(4)
- 0.254 in(75)
- 0.255 in(2)
- 0.257 in(46)
- 0.265 in(4)
- 0.269 in(3)
- 0.277 in(5)
- 0.278 in(23)
- 0.284 in(1)
- 0.305 in(32)
- 0.317 in(2)
- 0.342 in(135)
- 0.343 in(8)
- 0.375 in(44)
- 0.381 in(137)
- 0.433 in(94)
- 0.436 in(14)
- 0.457 in(2)
- 0.458 in(121)
- 0.48 in(1)
- 0.49 in(12)
- 0.5 in(151)
- 0.508 in(313)
- 0.518 in(1)
- 0.547 in(5)
- 0.61 in(231)
- 0.625 in(56)
- 0.635 in(62)
- 0.648 in(1)
- 0.65 in(271)
- 0.654 in(145)
- 0.656 in(6)
- 0.668 in(1)
- 0.75 in(81)
- 0.762 in(84)
- 0.763 in(2)
- 0.866 in(97)
- 0.872 in(13)
- 1.0 in(19)
- 1.016 in(4)
- 1.083 in(17)
- 1.181 in(3)
- 1.299 in(4)
- 1.575 in(1)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 04 (6)
- 13 (2)
- 16 (1)
- 18 (1)
- 1P (138)
- 22 (3)
- 2P (40)
- 41 (1)
- 43 (3)
- 4P (23)
- 5 (16)
- 65 (49)
- 6P (52)
- 7N (41)
- 8 (12)
- AL (34)
- AL3 (5)
- B (11)
- CT (1)
- EMT (1)
- EN95 (1)
- FF (39)
- FP (101)
- FS (47)
- FW (7)
- HP (4)
- LF (20)
- ML (66)
- MP (74)
- MR (82)
- MS (94)
- MU (109)
- MW (11)
- N (2)
- RH (152)
- RU (42)
- SR (17)
- T (4)
- UF (55)
- UM (64)
- UR (229)
Cutting Tool Material
Cutting Tool Material
- B H (474)
- B L (519)
- C A (343)
- C N (413)
- D P (565)
- H T (470)
- H W (3127)
Tolerance Class
Tolerance Class
- G (314)
- H (144)
- M (1932)
- U (66)
Back-End
Connection Type
Connection Type
- BORING BAR (480)
- CYLINDRICAL (32)
- SQUARE SHANK (415)
Back-End Diameter
Back-End Diameter
- 3.95 mm(29)
- 4.0 mm(3)
- 4.75 mm(24)
- 4.775 mm(1)
- 5.0 mm(5)
- 6.0 mm(12)
- 6.351 mm(22)
- 7.926 mm(24)
- 7.95 mm(1)
- 8.0 mm(16)
- 9.525 mm(36)
- 10.0 mm(21)
- 12.0 mm(17)
- 12.701 mm(72)
- 15.875 mm(49)
- 16.0 mm(25)
- 19.05 mm(35)
- 19.1 mm(1)
- 20.0 mm(19)
- 25.0 mm(31)
- 25.401 mm(20)
- 30.0 mm(1)
- 31.701 mm(2)
- 31.75 mm(4)
- 32.0 mm(24)
- 38.1 mm(5)
- 40.0 mm(17)
- 50.0 mm(6)
- 50.801 mm(4)
- 63.5 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.156 in(29)
- 0.157 in(3)
- 0.187 in(24)
- 0.188 in(1)
- 0.197 in(5)
- 0.237 in(12)
- 0.25 in(22)
- 0.312 in(24)
- 0.313 in(1)
- 0.315 in(16)
- 0.375 in(36)
- 0.394 in(21)
- 0.473 in(17)
- 0.5 in(72)
- 0.625 in(49)
- 0.63 in(25)
- 0.75 in(35)
- 0.752 in(1)
- 0.787 in(19)
- 0.984 in(31)
- 1.0 in(20)
- 1.181 in(1)
- 1.248 in(2)
- 1.25 in(4)
- 1.26 in(24)
- 1.5 in(5)
- 1.575 in(17)
- 1.969 in(6)
- 2.0 in(4)
- 2.5 in(2)
to
Shank Height
Shank Height
- 0.276 in(1)
- 0.315 in(2)
- 0.354 in(4)
- 0.375 in(1)
- 0.394 in(4)
- 0.433 in(1)
- 0.473 in(10)
- 0.5 in(6)
- 0.625 in(2)
- 0.63 in(22)
- 0.75 in(19)
- 0.787 in(75)
- 0.939 in(1)
- 0.984 in(107)
- 0.985 in(1)
- 1.0 in(45)
- 1.25 in(18)
- 1.26 in(76)
- 1.5 in(6)
- 1.53 in(1)
- 1.575 in(20)
- 1.848 in(2)
- 1.969 in(1)
to
Shank Height
Shank Height
- 7.0 mm(1)
- 8.0 mm(2)
- 9.0 mm(4)
- 9.525 mm(1)
- 10.0 mm(4)
- 11.0 mm(1)
- 12.0 mm(10)
- 12.701 mm(6)
- 15.875 mm(2)
- 16.0 mm(22)
- 19.05 mm(19)
- 20.0 mm(75)
- 23.826 mm(1)
- 25.0 mm(107)
- 25.026 mm(1)
- 25.401 mm(45)
- 31.75 mm(18)
- 32.0 mm(76)
- 38.1 mm(6)
- 38.825 mm(1)
- 40.0 mm(20)
- 46.95 mm(2)
- 50.0 mm(1)
to
Shank Width
Shank Width
- 0.315 in(2)
- 0.375 in(1)
- 0.394 in(5)
- 0.473 in(10)
- 0.5 in(6)
- 0.625 in(2)
- 0.63 in(22)
- 0.75 in(19)
- 0.787 in(75)
- 0.864 in(1)
- 0.984 in(144)
- 1.0 in(49)
- 1.25 in(14)
- 1.26 in(41)
- 1.455 in(1)
- 1.5 in(6)
- 1.575 in(18)
- 1.848 in(2)
- 1.969 in(1)
to
Shank Width
Shank Width
- 8.0 mm(2)
- 9.525 mm(1)
- 10.0 mm(5)
- 12.0 mm(10)
- 12.701 mm(6)
- 15.875 mm(2)
- 16.0 mm(22)
- 19.05 mm(19)
- 20.0 mm(75)
- 21.951 mm(1)
- 25.0 mm(144)
- 25.401 mm(49)
- 31.75 mm(14)
- 32.0 mm(41)
- 36.95 mm(1)
- 38.1 mm(6)
- 40.0 mm(18)
- 46.95 mm(2)
- 50.0 mm(1)
to
No filters matching ""
