欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

WIDIA 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车
选择筛选器
筛选器
筛选器
    查看以下位置的筛选器
    Metric
    Inch
    keyFilters
    工件材料
    工件材料
    • P 钢 (7)
      • P0
        低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS(7)
      • P1
        低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS(7)
      • P2
        中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS(7)
      • P3
        合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS(7)
      • P4
        合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS(7)
      • P5
        铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS(7)
      • P6
        高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS(7)
    • M 不锈钢 (7)
      • M1
        奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS(7)
      • M2
        高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS(7)
      • M3
        双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS(7)
    • K 铸铁 (7)
      • K1
        灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS(7)
      • K2
        中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS(7)
      • K3
        高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS(7)
    • N 非铁金属材料 (7)
      • N1
        铝型材 (7)
      • N2
        低硅铝合金和镁合金 硅 < 12.2%(7)
      • N3
        高硅铝合金 硅 > 12.2%(5)
      • N4
        可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (7)
      • N5
        尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (7)
      • N6
        碳、石墨复合材料、CFRP (7)
      • N7
        MMC (7)
    • S 高温合金 (7)
      • S1
        铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS(7)
      • S2
        钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS(7)
      • S3
        镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS(7)
      • S4
        钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS(7)
    • H 淬火材料 (7)
      • H1
        淬火材料 44-48 HRC(7)
      • H2
        淬火材料 48-55 HRC(7)
      • H3
        淬火材料 56-60 HRC(7)
      • H4
        淬火材料 >60 HRC(4)
    • C CFRP 材料 (7)
      • C1
        CFRP，CFRP/CFRP (7)
      • C2
        CFRP/铝 CFRP/有色金属 (7)
    应用
    应用
    • FacingFacing (7)
    • ID FacingID Facing (7)
    • Multiple Direction CuttingMultiple Direction Cutting (7)
    • Plunge TurningPlunge Turning (2)
    • TRN BoringTRN Boring (7)
    • TurningTurning (7)
    切削条件
    切削条件
    • Heavily Interrupted Cut (7)
    • Lightly Interrupted Cut (7)
    • Smooth Cut (7)
    • Varying Depth of Cut (7)
    刀具切削刃角度
    刀具切削刃角度
    • 75.0 (1)
    • 93.0 (2)
    • 95.0 (4)
    刀具切削刃角度 Min到刀具切削刃角度 Max
    每个刀片的切削刃
    每个刀片的切削刃
    • 1.0 (7)
    • 2.0 (7)
    • 4.0 (7)
    • 8.0 (5)
    每个刀片的切削刃 Min到每个刀片的切削刃 Max
    cornerConfiguration
    刀尖半径
    刀尖半径
    • 0.004 in(4)
    • 0.008 in(2)
    • 0.014 in(2)
    • 0.016 in(4)
    • 0.031 in(7)
    • 0.047 in(7)
    • 0.062 in(2)
    • 0.063 in(7)
    • 0.095 in(3)
    刀尖半径 Min到刀尖半径 Max
    刀尖半径
    刀尖半径
    • 0.1 mm(4)
    • 0.2 mm(2)
    • 0.351 mm(2)
    • 0.4 mm(4)
    • 0.8 mm(7)
    • 1.201 mm(7)
    • 1.576 mm(2)
    • 1.6 mm(7)
    • 2.401 mm(3)
    刀尖半径 Min到刀尖半径 Max
    application
    最小切削深度
    最小切削深度
    最小进给
    最小进给
    切削刀具材质
    切削刀具材质
    • 13E (7)
    • 241 (2)
    • CL4 (7)
    • CM2 (4)
    • CM3 (7)
    • CM4 (2)
    • CPX (7)
    • CW2 (4)
    • CW2015 (7)
    • CW5025 (7)
    • GX (5)
    • HK1500 (7)
    • HT2 (4)
    • HTX (2)
    • K060 (2)
    • K090 (7)
    • K1 (5)
    • K10M (7)
    • K10P (7)
    • K10U (4)
    • K15U (4)
    • K20K (7)
    • K21 (5)
    • K25M (4)
    • K25P (7)
    • K313 (7)
    • K35P (2)
    • K420 (5)
    • K45 (2)
    • K68 (7)
    • KB1340 (2)
    • KB1345 (2)
    • KB1610 (2)
    • KB1625 (2)
    • KB1630 (2)
    • KB5610 (2)
    • KB5625 (2)
    • KB5630 (2)
    • KB9610 (4)
    • KB9640 (2)
    • KBH10 (4)
    • KBH10B (4)
    • KBH20 (4)
    • KBH20B (4)
    • KBK35 (2)
    • KC210 (7)
    • KC250 (5)
    • KC5010 (7)
    • KC5025 (7)
    • KC5410 (7)
    • KC5510 (7)
    • KC5525 (4)
    • KC710 (2)
    • KC720 (2)
    • KC722 (2)
    • KC730 (5)
    • KC7310 (7)
    • KC732 (2)
    • KC8050 (7)
    • KC810 (7)
    • KC850 (7)
    • KC9010 (7)
    • KC9025 (7)
    • KC910 (7)
    • KC9105 (7)
    • KC9110 (7)
    • KC9120 (7)
    • KC9125 (7)
    • KC9140 (7)
    • KC9145 (7)
    • KC9210 (2)
    • KC9215 (7)
    • KC9225 (7)
    • KC9240 (7)
    • KC9240NEW (7)
    • KC9245 (7)
    • KC9315 (7)
    • KC9320 (7)
    • KC9325 (7)
    • KC935 (7)
    • KC950 (7)
    • KC990 (7)
    • KCK05 (7)
    • KCK05B (7)
    • KCK15 (7)
    • KCK15B (7)
    • KCK20 (7)
    • KCK20B (7)
    • KCM15 (7)
    • KCM15B (7)
    • KCM25 (7)
    • KCM25B (7)
    • KCM35 (7)
    • KCM35B (7)
    • KCP05 (4)
    • KCP05B (4)
    • KCP10 (7)
    • KCP10B (7)
    • KCP25 (7)
    • KCP25B (7)
    • KCP25C (7)
    • KCP30 (7)
    • KCP30B (7)
    • KCP40 (7)
    • KCP40B (7)
    • KCPK05 (7)
    • KCS10 (2)
    • KCS10B (7)
    • KCU10 (7)
    • KCU10B (7)
    • KCU25 (7)
    • KCU25B (7)
    • KD050 (2)
    • KD081 (2)
    • KD100 (2)
    • KD120 (2)
    • KD1400 (2)
    • KD1405 (2)
    • KD1425 (2)
    • KM1 (2)
    • KMF (2)
    • KS15 (2)
    • KT1120 (2)
    • KT125 (4)
    • KT150 (2)
    • KT175 (4)
    • KT315 (4)
    • KT325 (4)
    • KTP10 (4)
    • KTP25S (4)
    • KU10T (4)
    • KU30T (7)
    • KY1310 (2)
    • KY1320 (7)
    • KY1540 (5)
    • KY1615 (7)
    • KY2000 (5)
    • KY2100 (2)
    • KY3000 (7)
    • KY3400 (5)
    • KY3500 (7)
    • KY4000 (2)
    • KY4300 (5)
    • KY4400 (7)
    • KYHK15B (7)
    • KYK10 (2)
    • KYK25 (5)
    • KYK35 (7)
    • KYS25 (5)
    • KYS30 (5)
    • NL200 (4)
    • NL250 (7)
    • NL300 (7)
    • NL400 (5)
    • NL920 (4)
    • P25 (2)
    • PB100 (2)
    • PB170 (2)
    • PB250 (2)
    • PB300 (2)
    • PS5 (4)
    • SP0819 (7)
    • SP3019 (5)
    • SP4019 (5)
    • SPADAP (3)
    • THM (5)
    • THM-X (4)
    • THMF-X (2)
    • TN10P (7)
    • TN10U (4)
    • TN15M (7)
    • TN15U (4)
    • TN2000 (7)
    • TN20K (7)
    • TN20P (7)
    • TN30M (7)
    • TN30P (7)
    • TN4000 (7)
    • TN5015 (7)
    • TN5020 (7)
    • TN5105 (4)
    • TN5120 (7)
    • TN6010 (4)
    • TN6025 (4)
    • TN7005 (4)
    • TN7010 (7)
    • TN7015 (7)
    • TN7025 (7)
    • TN7035 (7)
    • TN7105 (4)
    • TN7110 (7)
    • TN7115 (7)
    • TN7125 (7)
    • TN7135 (7)
    • TN8025 (7)
    • TTI15 (4)
    • TTR (2)
    • TTS (7)
    • TTX (4)
    • WBH10C (4)
    • WBH10P (2)
    • WBH10U (2)
    • WBH20P (4)
    • WBH25P (2)
    • WBH25U (4)
    • WBH30P (2)
    • WBK40U (2)
    • WBK45U (4)
    • WDN00U (2)
    • WDN25U (2)
    • WK05CT (7)
    • WK15CT (4)
    • WK20CT (7)
    • WM15CT (7)
    • WM25CT (7)
    • WM35CT (7)
    • WP05CT (2)
    • WP15CT (7)
    • WP25CT (7)
    • WP35CT (7)
    • WS10PT (7)
    • WS25PT (7)
    • WU10HT (7)
    • WU10PT (4)
    • WU25PT (4)
    • X00511 (2)
    • X00580 (2)
    • X00581 (2)
    • X00582 (2)
    • X00583 (2)
    • X00584 (2)
    • X00585 (2)
    • X00586 (2)
    • X00591 (2)
    • X00592 (2)
    • X00593 (2)
    • X00594 (2)
    • X00596 (2)
    • X00597 (2)
    • X00599 (2)
    修光刃刀片
    修光刃刀片
    • N (7)
    • Y (6)
    最小轴向凹槽直径
    最小轴向凹槽直径
    • 110.0 mm(4)
    • 125.0 mm(2)
    • 165.0 mm(1)
    最小轴向凹槽直径 Min到最小轴向凹槽直径 Max
    最小轴向凹槽直径
    最小轴向凹槽直径
    • 4.331 in(4)
    • 4.921 in(2)
    • 6.496 in(1)
    最小轴向凹槽直径 Min到最小轴向凹槽直径 Max
    最大镗孔深度
    最大镗孔深度
    • 2.362 in(2)
    最大镗孔深度 Min到最大镗孔深度 Max
    最大镗孔深度
    最大镗孔深度
    • 60.0 mm(2)
    最大镗孔深度 Min到最大镗孔深度 Max
    frontEnd
    刀片形状
    刀片形状
    • C-DIAMOND/RHOMBIC 80 (5)
    • D-DIAMOND/RHOMBIC 55 (2)
    insertGeometry
    切削刀具材料
    切削刀具材料
    • B H (4)
    • B L (4)
    • C A (7)
    • C N (7)
    • D P (4)
    • H T (4)
    • H W (7)
    No filters matching ""
    PCLN 95°
    (4)

    PCLN 95°

    PDJN 93°
    (2)

    PDJN 93°

    PCRN 75°
    (1)

    PCRN 75°

    您即将把 添加至“我的解决方案”页面. 是否要继续？
    Select the destination where you want to move 到.
    最新 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    请输入一个有效名称
    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    应记录以查看仪表盘信息
    Session expired due to inactivity, please login again
    您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
    件物品已成功添加到购物车
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO CatalogGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?