VHSC • Shell Mills • Inch
通用表示形式
请联系我们的销售人员来了解您的定价。
Features and benefits
- Productivity booster up to 525in3/min (8600cm3/min) MRR at machining Aluminum components.
- Only one cutter body style to load inserts with nose radii from .008" (0.2mm) up to .236" (6mm).
- Consistent axial gage length with insert nose radii from .008" (0.2mm) up to .236" (6mm).
- 端面铣削
- 螺旋铣削
- 坡铣: 毛坯
- 铣削 — 贯通式冷却
- 铣削 — 侧铣和端面铣
- 刀座
- Inclined Square End Mill
刀片选择指南
材料 分组 | 轻切削 | 中等切削 | 重切削 | |||
槽型 | 材质 | 槽型 | 材质 | 槽型 | 材质 | |
N1–N2 | .F..ALP | WN10HM | .F..ALP | WN10HM | .E..ALP | WN10HM |
N3 | .F..ALP | WN10HM | .F..ALP | WN10HM | .E..ALP | WN10HM |
建议的初始进给量 [毫米]
刀片槽型 | 每齿进给量设定值 (fz) 切削宽度 (ae)与刀盘直径百分比 | 刀片槽型 | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.F..ALP | 0,12 | 0,45 | 0,81 | 0,08 | 0,33 | 0,58 | 0,06 | 0,25 | 0,43 | 0,06 | 0,21 | 0,38 | 0,05 | 0,20 | 0,35 | .F..ALP |
.E..ALP | 0,15 | 0,50 | 0,92 | 0,11 | 0,36 | 0,66 | 0,08 | 0,27 | 0,50 | 0,07 | 0,24 | 0,43 | 0,07 | 0,22 | 0,40 | .E..ALP |
轻切削 | 中等切削 | 重切削 |
Recommended Starting Feeds [IPT]
刀片槽型 | 每齿进给量设定值 (fz) 切削宽度 (ae)与刀盘直径百分比 | 刀片槽型 | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.F..ALP | .005 | .018 | .032 | .003 | .013 | .023 | .003 | .010 | .017 | .002 | .009 | .015 | .002 | .008 | .014 | .F..ALP |
.E..ALP | .006 | .020 | .037 | .004 | .014 | .027 | .003 | .011 | .020 | .003 | .009 | .017 | .003 | .009 | .016 | .E..ALP |
轻切削 | 中等切削 | 重切削 |
湿式加工的建议初始速度 [米/分钟]
材料 分组 | WN10HM | |||
N | 1 | 2950 | 1800 | 875 |
2 | 2950 | 1800 | 875 | |
3 | 1600 | 850 | 480 |
Recommended Starting Speeds for Wet Machining [SFM]
材料 分组 | WN10HM | |||
N | 1 | 9640 | 5880 | 2860 |
2 | 9640 | 5880 | 2860 | |
3 | 5230 | 2775 | 1565 |