欢迎
请确认您的首选项
更新首选项
产品建议
Product Family suggestions
编辑解决方案
添加解决方案
解决方案名称:{{SolutionName}}Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
M170 • RDPX-MH • RD12T3..
iC12 • 刀片
Features and benefits
- -MH 槽型是重型加工应用的首选。
- 适合高强度钢、铸铁材料和难加工材料的加工。
刀片选择指南
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | MM | TN6525 | MM | TN6525 | MM | TN6540 |
| P3–P4 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| P5–P6 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| M1–M2 | – | – | MM | TN6525 | MM | TN6540 |
| M3 | – | – | MM | TN6525 | MM | TN6540 |
| K1–K2 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| K3 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | MM | TN6540 | – | – |
| S3 | – | – | MM | TN6540 | – | – |
| S4 | – | – | MM | TN6540 | – | – |
| H1 | MH | TN2505 | MH | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,33 | 0,48 | 0,76 | 0,24 | 0,35 | 0,54 | 0,18 | 0,26 | 0,41 | 0,16 | 0,23 | 0,35 | 0,14 | 0,21 | 0,33 | MM |
| MH | 0,35 | 0,70 | 1,17 | 0,25 | 0,50 | 0,84 | 0,19 | 0,38 | 0,63 | 0,16 | 0,33 | 0,55 | 0,15 | 0,30 | 0,50 | MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,38 | 0,56 | 0,88 | 0,28 | 0,40 | 0,63 | 0,21 | 0,30 | 0,47 | 0,18 | 0,26 | 0,41 | 0,17 | 0,24 | 0,38 | MM |
| MH | 0,40 | 0,81 | 1,36 | 0,29 | 0,58 | 0,97 | 0,22 | 0,43 | 0,72 | 0,19 | 0,38 | 0,63 | 0,17 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,60 | 0,88 | 1,38 | 0,43 | 0,63 | 0,99 | 0,32 | 0,47 | 0,74 | 0,28 | 0,41 | 0,64 | 0,26 | 0,38 | 0,59 | MM |
| MH | 0,63 | 1,28 | 2,16 | 0,45 | 0,91 | 1,53 | 0,34 | 0,68 | 1,14 | 0,30 | 0,59 | 0,99 | 0,27 | 0,54 | 0,90 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,44 | 0,65 | 1,02 | 0,32 | 0,47 | 0,73 | 0,24 | 0,35 | 0,55 | 0,21 | 0,30 | 0,48 | 0,19 | 0,28 | 0,44 | MM |
| MH | 0,47 | 0,94 | 1,59 | 0,34 | 0,68 | 1,13 | 0,25 | 0,50 | 0,84 | 0,22 | 0,44 | 0,73 | 0,20 | 0,40 | 0,67 | MH |
建议的初始速度 [米/分钟]
| Material Group | TN2505 | TN6525 | TN6540 | |||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | |