Producto similar a:
VSM890™-12 • Shell Mills • Inch
Shell Mills • Inch
Número de material6596135
Referencia ISOVSM890D300Z05S100SN12Referencia ANSIVSM890D300Z05S100SN12
- P Acero
- M Acero inoxidable
- K Fundición
- N Materiales no ferrosos
- S Aleaciones de alta temperatura
- H Materiales endurecidos
100018357
Ranurado: Placa cuadrada
Fresado — Con refrigeración interna
Fresado lateral/Fresado en escuadra: Placa cuadrada
38295
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Información general
- Datos de aplicación
- Descargas
- Piezas compatibles Lado máquina
- Piezas compatibles Lado de la pieza
- Piezas de recambio
- Comentarios
- Preguntas y Respuestas
Número de material | 6596135 |
Referencia ISO | VSM890D300Z05S100SN12 |
Referencia ANSI | VSM890D300Z05S100SN12 |
Diámetro de corte efectivo [D1] | 76.2 mm |
Diámetro de corte efectivo [D1] | 3 in |
Adaptador/Mango/Diá int [D] | 25.4 mm |
Adaptador/Mango/Diá int [D] | 1 in |
Diámetro de núcleo [D6] | 55.626 mm |
Diámetro de núcleo [D6] | 2.19 in |
Longitud total [L] | 44.45 mm |
Longitud total [L] | 1.75 in |
1.ª profundidad de corte máxima [AP1MAX] | 9.8 mm |
1.ª profundidad de corte máxima [AP1MAX] | .3872 in |
Número de plaquitas | 5 |
RPM máx. | 18500 |
Suministro de refrigerante | Y |
Peso en libras | 1.63 |
Materiales de la pieza de trabajo
- Acero
- Acero inoxidable
- Fundición
- Materiales no ferrosos
- Aleaciones de alta temperatura
- Materiales endurecidos
Uses and application
100018357
Ranurado: Placa cuadrada
Fresado — Con refrigeración interna
Fresado lateral/Fresado en escuadra: Placa cuadrada
38295
Features and benefits
- True 0° wall and stepping down capability.
- Optimized chip gash design for proper chip evacuation.
- User-friendly pocket numbering system.
- Cutter bodies with internal coolant supply.
- Less bur creation on the workpiece.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
Insert Selection
Guía para la selección de plaquitas
Light | General | Heavy | ||||
Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | SNHX-ML | WS40PM | SNHX-MM | WP40PM | SNHX-MM | WP40PM |
P3–P4 | SNHX-ML | WS40PM | SNHX-MM | WP40PM | SNHX-MM | WP40PM |
P5–P6 | SNHX-ML | WP25PM | SNHX-MM | WP40PM | SNHX-MM | WP40PM |
M1–M2 | SNHX-ML | WS40PM | SNHX-ML | WS40PM | SNHX-MM | WS40PM |
M3 | SNHX-ML | WS40PM | SNHX-ML | WS40PM | SNHX-MM | WS40PM |
K1–K2 | SNHX-MM | WK15CM | SNHX-MM | WK15CM | SNHX-MM | WK15CM |
K3 | SNHX-MM | WK15CM | SNHX-MM | WK15CM | SNHX-MM | WK15CM |
N1–N2 | SNHX-ALP | WN25PM | SNHX-ALP | WN25PM | SNHX-ALP | WN25PM |
N3 | SNHX-ALP | WN25PM | SNHX-ALP | WN25PM | SNHX-ALP | WN25PM |
S1–S2 | SNHX-ML | WP25PM | SNHX-ML | WS40PM | SNHX-MM | WS40PM |
S3 | SNHX-ML | WS40PM | SNHX-ML | WS40PM | SNHX-MM | WS40PM |
S4 | SNHX-ML | WS40PM | SNHX-ML | WS40PM | SNHX-MM | WS40PM |
H1 | SNHX-MM | WU10PM | SNHX-MM | WU10PM | – | – |
Feeds
Avances iniciales recomendados [mm]
Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
Insert Geometry | 5% | 10% | 20% | 30% | 40–100% | Insert Geometry | ||||||||||
.E..ALP | 0,12 | 0,28 | 0,43 | 0,08 | 0,20 | 0,31 | 0,06 | 0,15 | 0,23 | 0,06 | 0,13 | 0,20 | 0,05 | 0,12 | 0,18 | .E..ALP |
.E..ML | 0,17 | 0,32 | 0,60 | 0,13 | 0,23 | 0,44 | 0,09 | 0,18 | 0,33 | 0,08 | 0,15 | 0,28 | 0,08 | 0,14 | 0,26 | .E..ML |
.S..MM | 0,23 | 0,36 | 0,82 | 0,17 | 0,26 | 0,59 | 0,13 | 0,20 | 0,44 | 0,11 | 0,17 | 0,38 | 0,10 | 0,16 | 0,35 | .S..MM |
Light | General | Heavy |
Avances iniciales recomendados [IPT]
Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
Insert Geometry | 5% | 10% | 20% | 30% | 40–100% | Insert Geometry | ||||||||||
.E..ALP | .005 | .010 | .015 | .003 | .007 | .011 | .003 | .005 | .008 | .002 | .005 | .007 | .002 | .004 | .006 | .E..ALP |
.E..ML | .007 | .012 | .023 | .005 | .009 | .017 | .004 | .007 | .012 | .003 | .006 | .011 | .003 | .005 | .010 | .E..ML |
.S..MM | .009 | .014 | .032 | .007 | .010 | .023 | .005 | .008 | .017 | .004 | .007 | .015 | .004 | .006 | .014 | .S..MM |
Light | General | Heavy |
Speeds
Velocidades iniciales recomendadas [m/min]*
Material Group | WK15CM | WN25PM | WP25PM | WP35CM | WP40PM | WS40PM | WU10PM | |||||||||||||||
P | 1 | – | – | – | – | – | – | 330 | 285 | 270 | 455 | 395 | 370 | 295 | 260 | 245 | – | – | – | – | – | – |
2 | – | – | – | – | – | – | 275 | 240 | 200 | 280 | 255 | 230 | 250 | 215 | 180 | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | 255 | 215 | 175 | 255 | 230 | 205 | 230 | 195 | 160 | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | 225 | 185 | 150 | 190 | 175 | 160 | 205 | 170 | 135 | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | 185 | 170 | 150 | 260 | 230 | 210 | 170 | 155 | 135 | 170 | 145 | 120 | – | – | – | |
6 | – | – | – | – | – | – | 165 | 125 | 100 | 160 | 135 | 110 | 150 | 115 | 90 | 150 | 110 | 80 | – | – | – | |
M | 1 | – | – | – | – | – | – | 205 | 180 | 165 | 205 | 185 | 155 | 195 | 170 | 155 | 210 | 170 | 140 | – | – | – |
2 | – | – | – | – | – | – | 185 | 160 | 130 | 185 | 160 | 140 | 175 | 150 | 125 | 180 | 145 | 120 | – | – | – | |
3 | – | – | – | – | – | – | 140 | 120 | 95 | 145 | 130 | 115 | 130 | 115 | 90 | 145 | 110 | 85 | – | – | – | |
K | 1 | 420 | 385 | 340 | – | – | – | 230 | 205 | 185 | 295 | 265 | 240 | – | – | – | – | – | – | 295 | 265 | 240 |
2 | 335 | 295 | 275 | – | – | – | 180 | 160 | 150 | 235 | 210 | 190 | – | – | – | – | – | – | 230 | 205 | 190 | |
3 | 280 | 250 | 230 | – | – | – | 150 | 135 | 120 | 195 | 175 | 160 | – | – | – | – | – | – | 195 | 175 | 160 | |
N | 1 | – | – | – | 1075 | 945 | 875 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | 945 | 875 | 760 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | 945 | 875 | 760 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – |
2 | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – | |
3 | – | – | – | – | – | – | 50 | 40 | 25 | – | – | – | – | – | – | 50 | 40 | 25 | – | – | – | |
4 | – | – | – | – | – | – | 70 | 50 | 35 | – | – | – | – | – | – | 60 | 50 | 30 | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 160 | 130 | 90 |
Velocidades iniciales recomendadas [SFM]*
Material Group | WK15CM | WN25PM | WP25PM | WP35CM | WP40PM | WS40PM | WU10PM | |||||||||||||||
P | 1 | – | – | – | – | – | – | 1085 | 935 | 885 | 1490 | 1295 | 1210 | 970 | 855 | 805 | – | – | – | – | – | – |
2 | – | – | – | – | – | – | 900 | 785 | 655 | 915 | 835 | 750 | 820 | 705 | 590 | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | 835 | 705 | 575 | 835 | 750 | 670 | 755 | 640 | 525 | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | 740 | 605 | 490 | 620 | 570 | 520 | 675 | 560 | 445 | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | 605 | 560 | 490 | 850 | 750 | 685 | 560 | 510 | 445 | 560 | 475 | 395 | – | – | – | |
6 | – | – | – | – | – | – | 540 | 410 | 330 | 520 | 440 | 360 | 490 | 375 | 295 | 490 | 360 | 260 | – | – | – | |
M | 1 | – | – | – | – | – | – | 675 | 590 | 540 | 670 | 605 | 505 | 640 | 560 | 510 | 690 | 560 | 460 | – | – | – |
2 | – | – | – | – | – | – | 605 | 525 | 425 | 605 | 520 | 455 | 575 | 490 | 410 | 590 | 475 | 395 | – | – | – | |
3 | – | – | – | – | – | – | 460 | 395 | 310 | 475 | 425 | 375 | 425 | 375 | 295 | 475 | 360 | 280 | – | – | – | |
K | 1 | 1380 | 1265 | 1115 | – | – | – | 755 | 675 | 605 | 965 | 865 | 785 | – | – | – | – | – | – | 970 | 870 | 785 |
2 | 1100 | 970 | 900 | – | – | – | 590 | 525 | 490 | 770 | 685 | 620 | – | – | – | – | – | – | 755 | 675 | 625 | |
3 | 920 | 820 | 755 | – | – | – | 490 | 445 | 395 | 635 | 570 | 520 | – | – | – | – | – | – | 640 | 575 | 525 | |
N | 1 | – | – | – | 3525 | 3100 | 2870 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | 3100 | 2870 | 2495 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | 3100 | 2870 | 2495 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 130 | 115 | 80 | – | – | – |
2 | – | – | – | – | – | – | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 130 | 115 | 80 | – | – | – | |
3 | – | – | – | – | – | – | 165 | 130 | 80 | – | – | – | 165 | 130 | 100 | 165 | 130 | 80 | – | – | – | |
4 | – | – | – | – | – | – | 230 | 165 | 115 | 215 | 160 | 105 | 215 | 165 | 115 | 195 | 165 | 100 | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 525 | 425 | 295 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use