Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3959620 |
| Referencia ISO | RDPX12T3M0SNMH |
| Referencia ANSI | RDPX12T3M0SNMH |
| Calidad | TN6540 |
| Filos de corte por plaquita | 1 |
| Tamaño IC de plaquita [D] | 12 mm |
| Tamaño IC de plaquita [D] | .472 in |
| Grosor de plaquita [S] | 3.97 mm |
| Grosor de plaquita [S] | .1563 in |
| Grosor medio de las virutas [HM] | 0.17 mm |
| Grosor medio de las virutas [HM] | .006 in |
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | MM | TN6525 | MM | TN6525 | MM | TN6540 |
| P3–P4 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| P5–P6 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| M1–M2 | – | – | MM | TN6525 | MM | TN6540 |
| M3 | – | – | MM | TN6525 | MM | TN6540 |
| K1–K2 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| K3 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | MM | TN6540 | – | – |
| S3 | – | – | MM | TN6540 | – | – |
| S4 | – | – | MM | TN6540 | – | – |
| H1 | MH | TN2505 | MH | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,33 | 0,48 | 0,76 | 0,24 | 0,35 | 0,54 | 0,18 | 0,26 | 0,41 | 0,16 | 0,23 | 0,35 | 0,14 | 0,21 | 0,33 | MM |
| MH | 0,35 | 0,70 | 1,17 | 0,25 | 0,50 | 0,84 | 0,19 | 0,38 | 0,63 | 0,16 | 0,33 | 0,55 | 0,15 | 0,30 | 0,50 | MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,38 | 0,56 | 0,88 | 0,28 | 0,40 | 0,63 | 0,21 | 0,30 | 0,47 | 0,18 | 0,26 | 0,41 | 0,17 | 0,24 | 0,38 | MM |
| MH | 0,40 | 0,81 | 1,36 | 0,29 | 0,58 | 0,97 | 0,22 | 0,43 | 0,72 | 0,19 | 0,38 | 0,63 | 0,17 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,60 | 0,88 | 1,38 | 0,43 | 0,63 | 0,99 | 0,32 | 0,47 | 0,74 | 0,28 | 0,41 | 0,64 | 0,26 | 0,38 | 0,59 | MM |
| MH | 0,63 | 1,28 | 2,16 | 0,45 | 0,91 | 1,53 | 0,34 | 0,68 | 1,14 | 0,30 | 0,59 | 0,99 | 0,27 | 0,54 | 0,90 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,44 | 0,65 | 1,02 | 0,32 | 0,47 | 0,73 | 0,24 | 0,35 | 0,55 | 0,21 | 0,30 | 0,48 | 0,19 | 0,28 | 0,44 | MM |
| MH | 0,47 | 0,94 | 1,59 | 0,34 | 0,68 | 1,13 | 0,25 | 0,50 | 0,84 | 0,22 | 0,44 | 0,73 | 0,20 | 0,40 | 0,67 | MH |
| Material Group | TN2505 | TN6525 | TN6540 | |||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?