KM80ATC™ Cutting Units
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (36)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(36)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(36)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(36)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(36)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(36)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(36)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(36)
- M Stainless Steel (32)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(32)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(32)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(32)
- K Cast Iron (36)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(36)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(36)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(36)
- N Non-Ferrous Materials (22)
- N1Wrought Aluminum (22)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
- N3High-Silicon Aluminum Alloys Si >12.2%(15)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (22)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (22)
- N6Carbon, Graphite Composites, CFRP (22)
- N7MMC's (22)
- S High-Temp Alloys (27)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
- H Hardened Materials (20)
- H1Hardened Materials 44-48 HRC(20)
- H2Hardened Materials 48-55 HRC(20)
- H3Hardened Materials 56-60 HRC(20)
- H4Hardened Materials >60 HRC(9)
- C CFRP Materials (15)
- C1CFRP, CFRP / CFRP (15)
- C2CFRP / Aluminium CFRP / Non-Ferrous (15)
Applications
Applications
Chamfer Turning (3)
Cut-Off (3)
Deep Grooving (3)
Face Grooving (3)
Facing (30)
Grooving (7)
ID Grooving (4)
ID Thread Turning (4)
Multiple Direction Cutting (17)
OD Thread Turning (7)
Plunge Turning (3)
Profiling (11)
TRN Boring (19)
Turning (32)
Type of Thread
Type of Thread
- 60 (7)
- ACME (7)
- API (7)
- API RD (3)
- BSW (3)
- BUTTRESS (7)
- M (3)
- NPT (3)
- STUB ACME (3)
- UN (7)
- UNJ (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (34)
- Lightly Interrupted Cut (36)
- Smooth Cut (36)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 75.0 (15)
- 90.0 (13)
- 93.0 (2)
- 95.0 (4)
to
Connection Style
Connection Style
- KM (29)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (21)
- 2.0 (20)
- 4.0 (23)
- 8.0 (23)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.757 in(34)
- 3.15 in(2)
to
Over All Length [L]
Over All Length [L]
- 70.0 mm(34)
- 80.0 mm(2)
to
Corner Radius
Corner Radius
- 0.002 in(3)
- 0.003 in(7)
- 0.004 in(5)
- 0.005 in(3)
- 0.006 in(7)
- 0.007 in(7)
- 0.008 in(9)
- 0.01 in(7)
- 0.011 in(3)
- 0.012 in(3)
- 0.014 in(7)
- 0.016 in(5)
- 0.019 in(7)
- 0.02 in(3)
- 0.023 in(7)
- 0.031 in(16)
- 0.035 in(7)
- 0.039 in(3)
- 0.047 in(16)
- 0.049 in(3)
- 0.06 in(3)
- 0.062 in(3)
- 0.063 in(28)
- 0.069 in(3)
- 0.078 in(3)
- 0.079 in(7)
- 0.089 in(7)
- 0.094 in(10)
- 0.095 in(28)
- 0.098 in(4)
- 0.125 in(4)
- 0.126 in(10)
- 0.157 in(5)
- 0.394 in(2)
- 0.492 in(2)
- 0.63 in(2)
to
Corner Radius
Corner Radius
- 0.05 mm(3)
- 0.076 mm(7)
- 0.1 mm(5)
- 0.125 mm(3)
- 0.151 mm(7)
- 0.176 mm(7)
- 0.2 mm(9)
- 0.225 mm(3)
- 0.25 mm(7)
- 0.275 mm(3)
- 0.301 mm(3)
- 0.325 mm(7)
- 0.351 mm(7)
- 0.4 mm(5)
- 0.45 mm(7)
- 0.476 mm(1)
- 0.5 mm(3)
- 0.576 mm(7)
- 0.775 mm(3)
- 0.8 mm(13)
- 0.9 mm(7)
- 1.0 mm(3)
- 1.201 mm(16)
- 1.25 mm(3)
- 1.5 mm(3)
- 1.576 mm(3)
- 1.6 mm(28)
- 1.75 mm(3)
- 1.975 mm(3)
- 2.0 mm(7)
- 2.25 mm(7)
- 2.375 mm(10)
- 2.401 mm(28)
- 2.5 mm(4)
- 3.176 mm(4)
- 3.2 mm(10)
- 4.0 mm(5)
- 10.0 mm(2)
- 12.5 mm(2)
- 16.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (8)
- CG4 (2)
- CL4 (13)
- CM2 (7)
- CM3 (13)
- CM5 (2)
- CPX (13)
- CW2015 (8)
- CW5025 (8)
- GX (13)
- HK1500 (6)
- K090 (13)
- K1 (16)
- K10M (13)
- K10P (8)
- K10U (2)
- K15U (2)
- K20K (13)
- K21 (11)
- K25M (2)
- K25P (13)
- K2885 (3)
- K313 (22)
- K35P (5)
- K420 (29)
- K45 (2)
- K4H (3)
- K68 (22)
- KB1345 (7)
- KB1610 (2)
- KB1625 (2)
- KB1630 (9)
- KB5610 (2)
- KB5625 (5)
- KB5630 (2)
- KB9610 (2)
- KBH10 (2)
- KBH10B (2)
- KBH20 (3)
- KBH20B (2)
- KC210 (11)
- KC250 (14)
- KC5010 (32)
- KC5025 (20)
- KC5410 (20)
- KC5510 (13)
- KC710 (7)
- KC720 (14)
- KC722 (7)
- KC730 (22)
- KC7310 (13)
- KC732 (5)
- KC8050 (25)
- KC810 (20)
- KC850 (32)
- KC9010 (15)
- KC9025 (23)
- KC910 (16)
- KC9105 (8)
- KC9110 (36)
- KC9120 (26)
- KC9125 (29)
- KC9140 (23)
- KC9145 (23)
- KC9215 (13)
- KC9225 (13)
- KC9240 (27)
- KC9240NEW (22)
- KC9245 (13)
- KC9315 (15)
- KC9320 (20)
- KC9325 (13)
- KC935 (25)
- KC950 (25)
- KC990 (18)
- KCK05 (13)
- KCK05B (13)
- KCK15 (13)
- KCK15B (15)
- KCK20 (24)
- KCK20B (27)
- KCM15 (13)
- KCM15B (8)
- KCM25 (20)
- KCM25B (18)
- KCM35 (13)
- KCM35B (11)
- KCP05 (2)
- KCP05B (7)
- KCP10 (29)
- KCP10B (29)
- KCP25 (29)
- KCP25B (34)
- KCP25C (29)
- KCP30 (25)
- KCP30B (21)
- KCP40 (21)
- KCP40B (23)
- KCPK05 (17)
- KCS10 (2)
- KCS10B (13)
- KCU10 (32)
- KCU10B (22)
- KCU25 (22)
- KCU25B (20)
- KD050 (3)
- KD081 (5)
- KD100 (7)
- KD120 (9)
- KD1400 (2)
- KD1405 (2)
- KD1425 (5)
- KM1 (7)
- KT1120 (2)
- KT125 (2)
- KT150 (2)
- KT175 (5)
- KT315 (9)
- KT5020 (2)
- KTP10 (2)
- KTP25S (2)
- KU10T (9)
- KU25T (7)
- KU30T (20)
- KY1320 (8)
- KY1540 (6)
- KY1615 (10)
- KY2000 (6)
- KY3000 (20)
- KY3400 (11)
- KY3500 (13)
- KY4000 (2)
- KY4300 (6)
- KY4400 (8)
- KYHK15B (8)
- KYK25 (6)
- KYK35 (13)
- KYS25 (6)
- KYS30 (6)
- MC2 (2)
- NL250 (13)
- NL300 (23)
- NL400 (11)
- NL920 (9)
- SP0819 (11)
- SP3019 (11)
- SP4019 (6)
- SP4036 (2)
- SP4093 (2)
- SPADAP (21)
- SPN4W2 (5)
- THM (14)
- TN10P (13)
- TN10U (2)
- TN15M (13)
- TN15U (2)
- TN2000 (11)
- TN20K (13)
- TN20P (13)
- TN30M (13)
- TN30P (16)
- TN4000 (11)
- TN5015 (11)
- TN5020 (13)
- TN5120 (11)
- TN6010 (9)
- TN6025 (7)
- TN7010 (13)
- TN7015 (23)
- TN7025 (23)
- TN7035 (13)
- TN7110 (15)
- TN7115 (23)
- TN7125 (23)
- TN7135 (13)
- TN8025 (21)
- TTM09 (5)
- TTR (2)
- TTR-X (5)
- TTS (11)
- W00342 (5)
- WBH10C (2)
- WBH10P (2)
- WBH10U (2)
- WBH20P (2)
- WBH25P (2)
- WBH30P (2)
- WDN25U (2)
- WK05CT (13)
- WK20CT (15)
- WM15CT (13)
- WM25CT (18)
- WM35CT (13)
- WP15CT (25)
- WP25CT (25)
- WP35CT (25)
- WS10PT (13)
- WS25PT (13)
- WU10HT (9)
- WU10PT (6)
- WU25PT (4)
- YY72VD (2)
Hand Of Tool
Hand Of Tool
- L (14)
- N (2)
- R (13)
Wiper Insert
Wiper Insert
- N (36)
- Y (4)
F Dimension
F Dimension
- 0.0 mm(2)
- 48.0 mm(8)
- 53.0 mm(19)
to
F Dimension
F Dimension
- 0.0 in(2)
- 1.891 in(8)
- 2.087 in(19)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(3)
- 41.301 mm(1)
- 47.6 mm(1)
- 57.2 mm(2)
- 88.9 mm(1)
- 106.0 mm(19)
- 139.701 mm(1)
- 174.601 mm(1)
- 209.601 mm(2)
- 222.3 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(3)
- 1.627 in(1)
- 1.874 in(1)
- 2.253 in(2)
- 3.5 in(1)
- 4.173 in(19)
- 5.5 in(1)
- 6.875 in(1)
- 8.252 in(2)
- 8.752 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(7)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(7)
to
Cutting Direction
Cutting Direction
- B (4)
- E (11)
- S (14)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (20)
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
- 2.757 in(19)
to
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(19)
to
Front-End
Clamp Style
Clamp Style
- M (23)
- N (7)
- P (6)
Cutting Width
Cutting Width
- 0.039 in(3)
- 0.047 in(3)
- 0.06 in(3)
- 0.062 in(3)
- 0.069 in(3)
- 0.073 in(3)
- 0.078 in(3)
- 0.079 in(3)
- 0.088 in(3)
- 0.089 in(2)
- 0.094 in(1)
- 0.095 in(3)
- 0.097 in(3)
- 0.098 in(3)
- 0.105 in(3)
- 0.108 in(3)
- 0.11 in(3)
- 0.119 in(7)
- 0.122 in(3)
- 0.125 in(7)
- 0.126 in(7)
- 0.128 in(3)
- 0.131 in(1)
- 0.138 in(7)
- 0.143 in(3)
- 0.156 in(3)
- 0.157 in(7)
- 0.167 in(7)
- 0.169 in(3)
- 0.177 in(7)
- 0.178 in(3)
- 0.185 in(5)
- 0.188 in(7)
- 0.189 in(7)
- 0.192 in(1)
- 0.193 in(1)
- 0.195 in(3)
- 0.196 in(3)
- 0.197 in(4)
- 0.202 in(4)
- 0.213 in(4)
- 0.217 in(4)
- 0.219 in(4)
- 0.237 in(4)
- 0.25 in(4)
- 0.256 in(4)
to
Cutting Width
Cutting Width
- 1.0 mm(3)
- 1.201 mm(3)
- 1.5 mm(3)
- 1.576 mm(3)
- 1.75 mm(3)
- 1.826 mm(3)
- 1.975 mm(3)
- 2.0 mm(3)
- 2.2 mm(3)
- 2.225 mm(3)
- 2.25 mm(2)
- 2.375 mm(1)
- 2.401 mm(3)
- 2.475 mm(3)
- 2.5 mm(3)
- 2.676 mm(3)
- 2.75 mm(3)
- 2.801 mm(3)
- 3.0 mm(7)
- 3.1 mm(3)
- 3.176 mm(7)
- 3.2 mm(7)
- 3.25 mm(3)
- 3.325 mm(1)
- 3.5 mm(7)
- 3.6 mm(3)
- 3.95 mm(3)
- 3.975 mm(1)
- 4.0 mm(7)
- 4.25 mm(7)
- 4.3 mm(3)
- 4.5 mm(7)
- 4.525 mm(3)
- 4.7 mm(5)
- 4.775 mm(7)
- 4.801 mm(7)
- 4.875 mm(1)
- 4.9 mm(1)
- 4.95 mm(3)
- 4.976 mm(3)
- 5.0 mm(4)
- 5.125 mm(4)
- 5.4 mm(4)
- 5.5 mm(4)
- 5.575 mm(4)
- 6.0 mm(4)
- 6.351 mm(4)
- 6.5 mm(4)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (11)
- R-ROUND (6)
- S-SQUARE 90 (10)
- TN-TOP NOTCH (7)
- V-DIAMOND/RHOMBIC 35 (2)
Insert Size
Insert Size
- 3 (3)
- 4 (4)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (9)
- B L (5)
- C A (15)
- C N (20)
- D P (7)
- H T (11)
- H W (36)
Back-End
Connection Type
Connection Type
- TAPER SHANK (29)
System Size
System Size
- KM80ATC (29)
No filters matching ""
