100029626
100029627
Trochoidal Milling
Ramping : Ébauche
Rainurage : Bout plat
Fraisage de côté/avec épaulement : Bout plat
Angle d'hélice : 38°
Dimensions de l'outil : Configuration des goujures : 4
Fraisage en plongéeDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 6071561 |
| Ref. ISO Catalogue | 4XCT10ADL10 |
| Ref. ANSI Catalogue | 4XCT10ADL10 |
| Nuance | WS15PE |
| Style adaptateur du côté machine | DUO-LOCK |
| [D] Adaptateur / Queue / Diamètre d’alésage | 9.525 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .375 in |
| [L1] Longueur de référence | 21.4 mm |
| [L1] Longueur de référence | .8425 in |
| [CSMS] Dimension du système Côté machine | DL10 |
| [WF] Largeur du méplat | 8 mm |
| [WF] Largeur du méplat | .315 in |
| [Re] Rayon de bec | 0.381 mm |
| [Re] Rayon de bec | .015 in |
| [Z] Nombre de goujures | 4 |
| [D1] Diamètre effectif de coupe | 9.525 mm |
| [D1] Diamètre effectif de coupe | .375 in |
| [AP1MAX] 1re profondeur de coupe maximale | 14.288 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .5625 in |
100029626100029627Trochoidal MillingRamping : ÉbaucheRainurage : Bout platFraisage de côté/avec épaulement : Bout platAngle d'hélice : 38°Dimensions de l'outil : Configuration des goujures : 4Fraisage en plongéeGrades
WS15PE
Nuance de carbure revêtue PVD dont la composition chimique et le procédé ont été optimisés pour une meilleure résistance à l’usure. Un revêtement après traitement à la pointe de la technologie réduit le frottement et aide à maîtriser la chaleur dans l'usinage de superalliages.
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
 |  |  | ||||||||||||||||||
| Fraisage en bout (A) | court | moyen | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||
| A | B | adaptateur | Diamètre | |||||||||||||||||
| WP15PE | WP15PE | WP15PE | ||||||||||||||||||
| Vitesse de coupe | Vitesse de coupe | Vitesse de coupe | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
| Groupe Matières | ap | ae | ap | Mini | Maxi | Mini | Maxi | Mini | Maxi | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | 1.2500 | ||||
| P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
| 1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 | |
| 4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0033 | .0034 | |
| 5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | 170 | – | 281 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | 136 | – | 213 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0021 | .0022 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 120 | – | 156 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0028 | .0030 | |
| | | ||||||||||||||||||
| Fraisage en bout (A) | court | moyen | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||
| A | B | adaptateur | Diamètre | |||||||||||||||||
| WS15PE | WS15PE | WS15PE | ||||||||||||||||||
| Vitesse de coupe | Vitesse de coupe | Vitesse de coupe | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
| Groupe Matières | ap | ae | ap | Mini | Maxi | Mini | Maxi | Mini | Maxi | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | 1.2500 | ||||
| P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
| 1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 | |
| 4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0033 | .0034 | |
| 5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | 170 | – | 281 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | 136 | – | 213 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 490 | 351 | – | 441 | 351 | – | 441 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 460 | 324 | – | 414 | 324 | – | 414 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 430 | 324 | – | 387 | 324 | – | 387 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0038 | .0041 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0021 | .0022 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 120 | – | 156 | IPT | .0016 | .0020 | .0023 | .0026 | .0031 | .0033 | |
| 4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0028 | .0030 | |
| H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0033 | .0034 |
| 2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?